Development of polyurethane elastomer composite materials by addition of milled fiberglass with coupling agent

Polyurethane elastomer composites were developed using milled fiberglass and their mechanical properties were studied. In particular, the organically chemical treatment of the milled fiberglass was investigated in detail. It was demonstrated that both strength and toughness of the resulting elastomer composites were improved considerably with the addition content of fiberglass. Furthermore, it was indicated that the optimal properties can be achieved by the proper addition of milled fiberglass that was chemically treated using coupling agent.     

Enhanced light output in nitride-based light-emitting diodes by roughening the mesa sidewall

In this letter, we will report on a nitride-based light emitting diode with a mesa sidewall roughening process that increases light output power. The fabricated GaN-based light-emitting diode (LED) wafers were first treated through a photoelectrochemical (PEC) process. The Ga/sub 2/O/sub 3/ layers then formed around the GaN : Si n-type mesa sidewalls and the bottoms mesa etching regions. Selective wet oxidation occurred at the mesa sidewall between the p- and the n-type GaN interface. The light output power of the PEC treated LED was seen to increase by about 82% which was caused by a reduced index reflectance of GaN-Ga/sub 2/O/sub 3/-air layers, by a rough Ga/sub 2/O/sub 3/ surface, by a microroughening of the GaN sidewall surface, and by a selective oxidation step profile of the mesa sidewall that increases the light-extraction efficiency from the mesa sidewall direction. Consequently, this wet PEC treated process is suitable for high powered nitride-based LEDs lighting applications.     

Stimulation of negative magnetoresistance by an electric field and light in silicon doped with boron and manganese

It is experimentally ascertained that light stimulates the negative magnetoresistance observed in a high electric field in silicon doped with boron and manganese. The optimum conditions (the electric field, temperature, illumination, and resistivity of the material) for observation of the largest magnitude of negative magnetoresistance in (Si:B):Mn are determined. The dependence of the negative magnetoresistance on the concentration of compensating impurity is established.     

解放思想 加快发展 开创胶鞋行业新局面

2008年6月，温家宝总理在省区市和中央部门主要负责同志会议上指出：今年以来，我国经济社会发展经受了最为严峻的重大挑战和考验。这也让我们更加关注企业生存和发展的国际国内环境。     

中橡协力车胎分会召开第十五次会员大会

中国橡胶工业协会力车胎分会4月15～16日在青岛市召开了第十五次会员大会，大会总结了第六届理事会工作，讨论并通过推荐第七届理事和总会理事名单、副理事长和总会常务理事名单，确认了分会理事长、秘书长。讨论通过了第七届理事会工作设想及安排。     

我国工程机械现状及今后发展趋势

中国的工程机械行业建立于1961年。改革开放以后，由于国内对工程机械的需求量大，自1978年开始至20世纪末共引进近200项技术．发展了近500个新产品。使我国的工程机械迈上了一个新的台阶，当年引进的产品目前已成为我国工程机械的主导产品。     

改性生物质作为型煤黏结剂的研究

探讨了用NaOH改性生物质秸秆作为型煤黏结剂的可行性,考察了NaOH溶液浓度对生物质改性的影响以及生物质添加量、无机物(MgO和MgCl2)添加量对型煤机械强度、防水性能和着火温度的影响。研究结果表明,NaOH改性液的质量分数为1.0%~2.0%时,制得的生物质型煤有较高的机械强度;生物质添加量在2%~20%时,随生物质添加量的增加,机械强度增加,着火温度降低,但防水性较差;而在生物质型煤中加入适量无机黏结剂后,型煤有很高的浸水强度,表现出优越的防水性能。     

Influence of the preparation conditions on the size and morphology of nanocrystalline lanthanum orthoferrite

Nanocrystalline LaFeO₃ is prepared by the dehydration of coprecipitated lanthanum and iron(III) hydroxides. It is shown that the behavior of the samples during heating and the size distribution of LaFeO₃ nanocrystals can be considerably different depending on the scheme used for coprecipitation of lanthanum and iron hydroxides; independently of the method employed for coprecipitation of the initial compounds, sintering of the samples at 950°C leads to the formation of lanthanum orthoferrite crystals up to 100 nm in size.     

On effective offloading services for resource-constrained mobile devices running heavier mobile internet applications

Rapid advances in wireless mobile network technologies and mobile handsets (MHs) facilitate ubiquitous infrastructure that can support a range of mobile services and applications in addition to conventional mobile Internet access. One recent trend is to effectively run desktop PC-oriented heavier applications on MHs. However, due to their miniature, portable size, MHs are resource-constrained and therefore, running these applications directly on an MH is not satisfactory given a user's expectations. To cope with this problem, this article proposes a novel offloading service that can seamlessly offload some of the tasks of a mobile application from an MH to nearby, resource-rich PCs (called surrogates). The system architecture and key components of the proposed offloading service are presented, prototyped, and evaluated. The results of experiments and simulations have demonstrated the effectiveness and efficiency of this offloading service for mobile applications.