山西铝厂氧化铝生产铝土矿资源保证措施

通过扩大对铝土矿资源的对策和措施分析 ,为扩大山西铝厂氧化铝规模提供资源保障     

对国际岩石力学委员会J_V公式的质疑

通过对国际岩石力学委员会JV 公式的论证 ,指出了该公式不符合数理逻辑。结合工程勘察实践 ,拟建了Ky新公式 ,提高了工程岩体完整程度评价方法的科学性。     

基于MATLAB的VSP测井仪推靠机构的优化设计

为使VSP井下油气层测井仪在工作中保持稳定,保证测试结果的准确性,根据VSP测井仪的实际结构建立了机构简图,并建立了与该机构相对应的数学模型,利用MATLAB软件编制程序,得出了合理的水平推力和间距长度,提高了推靠机构的稳定性及VSP测井仪的测试精度.     

自然科学因素对设计的促进

基于对设计目的的认识不同,对设计的起源和科学与设计的关系做了深入地探讨,对科学和技术的本质联系做了有益的探索和研究.通过对人类设计的起源及科学和社会的发展阶段的变化对设计的影响,得出了设计源自于科学,约束于科学,是为人类实现某种特定目的的一项创造性活动的观点.     

近年来攀钢烧结工序采用的新技术

为了提高烧结矿强度、改善烧结矿粒度组成，提高烧结矿质量，对近年来攀钢烧结工序采用的一些新技术及其效果作了系统介绍。     

基于软交换的NAT/防火墙穿透技术研究

通过对目前几种解决NAT(network addres stranslation)／防火墙穿逢方案的分析，提出了一种较易实现的穿透技术，并给出具体实现方案。     

一氯胺消毒剂检测新技术及应用

讨论了传统一氯胺测定方法在应用中的局限性,并介绍了一种新的检测技术.实际应用表明该技术可以使水厂饮用水消毒中产生尽可能多的一氯胺,还可以使污水处理厂出水消毒中一氯胺的检测精确,而不受有机氯胺、亚硝酸盐和锰的干扰;帮助水厂控制过量投加氯和氨,从而降低成本.     

基于μC/GUI的嵌入式图形界面设计

μC／GUI是一种基于嵌入式应用的通用图形接口软件，文章在详细介绍μC／GUI特点的基础上给出了基于NHC_01型彩色液晶模块的移植实例，并提供了液晶模块与ARM7内核处理器的硬件接口框图。通过分析μC／GUI的动态内存管理机制，给出了一种基于窗口的嵌入式通用图形界面设计方法。     

Local residence time,residence revolution,and residence volume distributions in twin‐screw extruders

This work was aimed at studying the overall, partial, and local residence time distributions (RTD); overall, partial and local residence revolution distributions (RRD) and overall, partial and local residence volume distributions (RVD) in a co‐rotating twin screw extruder, on the one hand; and establishing the relationships among them, on the other hand. Emphasis was placed on the effects of the type and geometry of mixing elements (a gear block and various types of kneading elements differing in staggering angle) and process parameters on the RTD, RRD and RVD. The overall and partial RTD were directly measured in‐line during the extrusion process and the local ones were calculated by deconvolution based on a statistical theory. The local RTD allowed comparing the mixing performance of mixing elements. Also it was confirmed both experimentally and theoretically that specific throughput, defined as a ratio of throughput (Q) over screw speed (N), controlled all the above three types of residence distributions, be they local, partial or overall. The RRD and RVD do not provide more information on an extrusion process than the corresponding RTD. Rather they are different ways of representing the same phenomena. POLYM. ENG. SCI., 48:19–28, 2008. © 2007 Society of Plastics Engineers