Visual tracking using convolutional features with sparse coding

Artificial Intelligence Review - Visual object tracking has become one of the most active research topics in computer vision, and it has been applied in several commercial...     

X-ray and electron microscopical studies of thin films of (Cd1−xZnx)S solid solution

A series of (Cd_1–x Zn _x )S powders phosphors and thin layers prepared by thermal evaporation of solid solution were studied. The phosphors used were 41% ZnS: 59% CdS with a cobalt concentration from 0 to 0.325%. The analysis of the structure of films of different thicknesses using X-ray diffraction technique confirms that the calculated relative intensities of the planes show considerable differences from the experimental results. For film thicknesses 70 nm thea axis is normal to the substrate, while at greater thicknesses (273 nm) thec axis is practically normal to the substrate. The effect of the electron beam on the solid solution indicates that layers decomposed leaving the grain boundaries decorated by metallic cadmium and zinc particles.     

Pharmacological Evidence on Augmented Antiallodynia Following Systemic Co-Treatment with GlyT-1 and GlyT-2 Inhibitors in Rat Neuropathic Pain Model

The limited effect of current medications on neuropathic pain (NP) has initiated large efforts to develop effective treatments. Animal studies showed that glycine transporter (GlyT) inhibitors are promising analgesics in NP, though concerns regarding adverse effects were raised. We aimed to study NFPS and Org-25543, GlyT-1 and GlyT-2 inhibitors, respectively and their combination in rat mononeuropathic pain evoked by partial sciatic nerve ligation. Cerebrospinal fluid (CSF) glycine content was also determined by capillary electrophoresis. Subcutaneous (s.c.) 4 mg/kg NFPS or Org-25543 showed analgesia following acute administration (30–60 min). Small doses of each compound failed to produce antiallodynia up to 180 min after the acute administration. However, NFPS (1 mg/kg) produced antiallodynia after four days of treatment. Co-treatment with subanalgesic doses of NFPS (1 mg/kg) and Org-25543 (2 mg/kg) produced analgesia at 60 min and thereafter meanwhile increased significantly the CSF glycine content. This combination alleviated NP without affecting motor function. Test compounds failed to activate G-proteins in spinal cord. To the best of our knowledge for the first time we demonstrated augmented analgesia by combining GlyT-1 and 2 inhibitors. Increased CSF glycine content supports involvement of glycinergic system. Combining selective GlyT inhibitors or developing non-selective GlyT inhibitors might have therapeutic value in NP.     

Ambient‐cured polyesteramide‐based anticorrosive coatings from linseed oil—A sustainable resource

Ambient‐cured polyesteramide (APEA) coating resin synthesized from dihydroxy fatty amide obtained from linseed oil, a sustainable resource, and poly(styrene‐co‐maleic anhydride), a bifunctional acid component, was found to exhibit improved physicomechanical and anticorrosive properties. The structural elucidation of APEA resin has been carried out by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopies. The physicomechanical and chemical resistance properties were investigated by standard methods. The corrosion resistance performance was evaluated in acid, alkali, and organic solvent. The thermal behavior was studied by TGA technique. A comparative study of these properties of APEA with reported baked polyesteramide (PEA) coatings was carried out. A remarkable improvement in the drying property of APEA was observed. The APEA coatings also showed improved physicomechanical and anticorrosive properties as compared to the baked PEA coatings. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1818–1824, 2005     

Investigation of transport phenomena in a hybrid ion exchange-electrodialysis system for the removal of copper ions

Hybrid ion exchange electrodialysis processes allow the removal of metal ions from dilute waste liquids and the recovery of more concentrated solutions. The work reported here was aimed at investigating the two steps in the treatment process, namely, adsorption of metal ions onto the packed bed of resin and electromigration (i.e., the transport of these ions in the complex system under the applied electrical field). The case of copper sulfate was investigated. Dowex resins with a cross-linking degree of 2 and 8% were used. The flux of copper through the resin bed and the current efficiency for ion transfer to the cathode compartment were determined as a function of potential gradient and copper ionic fraction in the bed. Apparent diffusion coefficients of Cu²⁺ in the overall system were deduced from the experimental data.     

Vision Based Neuro-Fuzzy Controller for a Two Axes Gimbal System with Small UAV

This paper presents the development of a vision-based neuro-fuzzy controller for a two axes gimbal system mounted on a small Unmanned Aerial Vehicle (UAV). The controller uses vision-based object detection as input and generates pan and tilt motion and velocity commands for the gimbal in order to keep the interest object at the center of the image frame. A readial basis function based neuro-fuzzy system and a learning algorithm is developed for the controller to address the dynamic and non-linear characteristics of the gimbal movement. The controller uses two separate, but identical radial basis function networks, one for pan and one for tilt motion of the gimbal. Each system is initialized with a fixed number of neurons that act as rules basis for the fuzzy inference system. The membership functions and rule strengths are then adjusted with the feedback from the visual tracking system. The controller is trained off-line until a desired error level is achieved. Training is then continued on-line to allow the system to accommodate air speed changes. The algorithm learns from the error computed from the detected position of the object in image frame and generates position and velocity commands for the gimbal movement. Several tests including lab tests and actual flight tests of the UAV have been carried out to demonstrate the effectiveness of the controller. Test results show that the controller is able to converge effectively and generate accurate position and velocity commands to keep the object at the center of the image frame.     

Fuzzy decision support system for fertilizer

Fuzzy geographic information systems is a newly emerging field of computational intelligence. It combines fuzzy logic with spatial context. Most of the natural phenomena are fuzzy in nature. They show a degree of uncertainty or vagueness in their extent and attribute, which cannot be expressed by a crisp value. Agriculture is one of the fields of the spatial domain that needs to be described in fuzzy terms. Fertilizer is a key input for the agriculture sector. In this article, the spatial surfaces of fertilizers are developed for the wheat crop using a fuzzy decision support system. The algorithm of our system takes soil nutrients and cropping time as input, applies fuzzy logic on the input values, defuzzifies the fuzzy output to crisp value, and generates a fertilizer surface. The resultant output surface of fertilizer describes the amount of fertilizer needed to cultivate a specific crop in a specified area. The complexity of our algorithm is \(O(mnr)\) , where \(m\) is the height of the raster, \(n\) is the width of the raster, and \(r\) is the number of expert rules.     

A game attention model for efficient bit rate allocation in cloud gaming

The widespread availability of broadband internet access and the growth in server-based processing have provided an opportunity to run games away from the player into the cloud and offer a new promising service known as cloud gaming. The concept of cloud gaming is to render a game in the cloud and stream the resulting game scenes to the player as a video sequence over a broadband connection. To meet the stringent network bandwidth requirements of cloud gaming and support more players, efficient bit rate reduction techniques are needed. In this paper, we introduce the concept of game attention model (GAM), which is basically a game context-based visual attention model, as a means for reducing the bit rate of the streaming video more efficiently. GAM estimates the importance of each macro-block in a game frame from the player’s perspective and allows encoding the less important macro-blocks with lower bit rate. We have evaluated nine game video sequences, covering a wide range of game genre and a spectrum of scene content in terms of details, motion and brightness. Our subjective assessment shows that by integrating this model into the cloud gaming framework, it is possible to decrease the required bit rate by nearly 25 % on average, while maintaining a relatively high user quality of experience. This clearly enables players with limited communication resources to benefit from cloud gaming with acceptable quality.     

Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

Inhibitory Effect of Monoterpenes on Response of Pityogenes bidentatus to Aggregation Pheromone Released by Piezoelectric Sprayer for Precision Release of Semiochemicals

A piezoelectric sprayer for dispensing semiochemicals was developed and used for a field test of bark beetle semiochemicals. The sprayer consists of a geared pump that pushes a syringe slowly to dispense semiochemicals in solvents through a microtube to a glass micropipet fixed to a piezoelectric high-frequency vibrator. The frequency is adjusted via a function generator to about 120 kHz until the harmonic properties of the glass micropipet, drawn by an electrophysiological pipet puller, cause vibrations that atomize the solvent from the micropipet tip. The sprayer, syringe, pump, function generator, and power supply were hung on one arm of a rotating trap pair (traps 6 m apart) that was slowly rotated at 2 revolutions per hour (rph) to even out the position effects on trap catches. The aggregation pheromone components of Pityogenes bidentatus, grandisol and cis-verbenol, were released by standard tube dispensers in one trap and compared to the release of similar amounts by the sprayer in the other trap. No significant differences in catch were observed. No effect of the solvent hexane on aggregation could be observed. The trap pair also caught approximately equal numbers of bark beetles when the baits were identical. The release of (+)and (–)--pinene, (+)-3-carene, and terpinolene, monoterpenes of host Scotch pine, Pinus sylvestris, at increasing rates from 0.01 to 10 log-equivalents in decadic steps (each at 0.1–100 g/min) resulted in decreasing responses to aggregation pheromone (only 9% at highest rate). Inhibition by the individual monoterpenes tested at the 100 g/min rate was significant for (+)and (–)--pinene and terpinolene (12, 13, and 15% of control, respectively). The inhibition by the host Scotch pine monoterpenes may allow P. bidentatus to avoid resistant trees that release large amounts of toxic monoterpenes in their resin and instead colonize dying and diseased limbs or slash, the usual host substrate. The piezoelectric sprayer should prove generally useful to dispense precise amounts of semiochemicals in field and laboratory experiments.