Head and eye movements in unrestrained pigeons (Columba livia).

Head and eye movements were simultaneously recorded during locomotory and pecking behavior of 4 pigeons, which were trained to traverse a conditioning chamber, with a pecking key and a food dispenser at each end. Each trial involved key pecking, walking, and feeding. Head movements were registered with a skull-mounted miniature accelerometer, and eye movements were recorded with implanted electrooculogram (EOG) electrodes. An almost perfect temporal coordination between head and eye movements was observed during both walking and feeding bouts. During walking, head movements primarily provide retinal image stability, and eye movements support visual scanning. During feeding, head movements mainly subserve the grasping of food items, and eye movements maintain visual fixation on them. Because the eyes are reflexively closed during the middle phase of pecks, the head and eye movements are then under ballistic control. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of n-alkanes on wettability and zeta potential of quartz

Contact angles were measured in the following systems: quartz/water droplet/saturated vapor of water + n-alkane and quartz/water droplet/saturated vapor of n-alkane. The alkanes tested were from hexane to pentadecane. In both systems non-smooth changes of contact angle as a function of the chain length were observed. These changes are similar to the zeta-potential changes measured previously for two different samples of quartz in the quartz/n-alkana/water system. On the basis of the results and calculations it is suggested that the observed non-smooth changes of contact angle are due to similar changes in film pressures of the water and n-alkanes.     

A three-phase model for mixed columnar-equiaxed solidification

A three-phase model for mixed columnar-equiaxed solidification is presented in this article. The three phases are the parent melt as the primary phase, as well as the solidifying columnar dendrites and globular equiaxed grains as two different secondary phases. With an Eulerian approach, the three phases are considered as spatially coupled and interpenetrating continua. The conservation equations of mass, momentum, species, and enthalpy are solved for all three phases. An additional conservation equation for the number density of the equiaxed grains is defined and solved. Nucleation of the equiaxed grains, diffusion-controlled growth of both columnar and equiaxed phases, interphase exchanges, and interactions such as mass transfer during solidification, drag force, solute partitioning at the liquid/solid interface, and release of latent heat are taken into account. Binary steel ingots (Fe-0.34 wt pct C) with two-dimensional (2-D) axis symmetrical and three-dimensional (3-D) geometries as a benchmark were simulated. It is demonstrated that the model can be used to simulate the mixed columnar-equiaxed solidification, including melt convection and grain sedimentation, macrosegregation, columnar-to-equiaxed-transition (CET), and macrostructure distribution. The model was evaluated by comparing it to classical analytical models based on limited one-dimensional (1-D) cases. Satisfactory results were obtained. It is also shown that in order to apply this model for industrial castings, further improvements are still necessary concerning some details.     

Organic matter and nitrogen removal by an on site sewage treatment and disposal system

The performance of an on site sewage treatment and disposal system consisting of a septic tank, a gravel filter, a sand filter and soil absorption trenches operated alternatively, was studied in relation to organic matter and nitrogen removal efficiency. The system was simulated with the aid of a laboratory scale model. BOD₅ and SS removal efficiencies averaged 92.9 and 93.4% respectively. Substantial removal of nitrogen (up to 70%) was achieved due to nitrification followed by denitrification. Removal efficiencies were found to depend on the compaction characteristics of the filter media and the soil, the hydraulic loading applied and the flow conditions (saturated/unsaturated). The results indicate that the system under consideration is a feasible alternative for on site treatment and disposal of domestic sewage.     

Workplane illuminance prediction method for daylighting control systems

A new prediction method with an interior light sensor for the workplane illuminance in daylighting control systems is introduced. Based on radiosity theory, the spatial distributions of daylight and electric light in the space are discussed and the prediction method is developed. An experimental verification of the technique is performed in an outdoor test-room for a double-glazed window system with a motorized venetian blind integrated between the two glazings. Electric light and daylight predictions were performed in accordance with the proposed method. The results showed that the electric light workplane illuminance can be predicted with high accuracy (±5 lux error with a linear correlation) and that the daylight workplane illuminance can be predicted within ±20 lux (with a linear correlation) for any sky conditions (overcast, clear sky, or variable) with the window system controlled to prevent direct daylight transmission. This method is useful for integrated control of motorized daylighting devices and dimmable electric lights.     

A note on the satisfaction of the boundary conditions for Chebyshev collocation methods in rectangular domains

The way boundary conditions are imposed when applying Chebyshev collocation methods to Poisson and biharmonic-type problems in rectangular domains is investigated. It is shown that careful selection of the number of collocation points leads to a linear system ofn linearly independent equations inn unknowns.     

Semantische Informationsextraktion in medizinischen Informationssystemen

Zusammenfassung Dieser Artikel beschreibt einige Erfahrungen und typische Problemstellungen mit Textmining in der Medizin und gibt einen Einblick in aktuelle und zukünftige Herausforderungen in Forschung & Entwicklung. Interessant ist n?mlich, dass auch im ,,Multimedia-Zeitalter“ die meiste Information immer noch als ,,Text“ vorliegt. Mithilfe von statistischen und linguistischen Verfahren wird mit sogenannter ,,Textmining-Software“ versucht, aus Freitexten Information ,,heraus zu schürfen“ (deshalb ,,Textmining“). Allerdings ist es damit noch nicht genug. Der n?chste Schritt besteht darin, die Information sowohl nutzbar als auch brauchbar zu machen. Die jeweiligen End-Benutzerinnen und End-Benutzer müssen in die Lage versetzt werden, auf der Basis der gewonnenen Information deren Wissen zu erweitern. In unserem konkreten Fall sollen damit Entscheidungen im Rahmen ?rztlichen Handelns unterstützt werden. Probleml?sungen in diesem Bereich erfordern eine holistische Sicht- und Herangehensweise. Daher wird es immer wichtiger, Erkenntnisse aus Informatik und Psychologie zusammenflie?en zu lassen und auf systemischer Ebene technologisch umzusetzen.     

Efficient allylation of cellulose in dimethyl sulfoxide/tetrabutylammonium fluoride trihydrate

The cellulose solvent dimethyl sulfoxide (DMSO)/tetrabutylammonium fluoride trihydrate (TBAF) was successfully applied as reaction medium for the synthesis of allyl cellulose by conversion of the polymer with allyl chloride in the presence of solid NaOH. Samples with degree of substitution from 0.50 to 2.98 were accessible by varying the molar ratio anhydroglucose unit:allyl chloride:NaOH and reaction time. DMSO/TBAF was found to be an efficient reaction medium for the preparation of highly functionalized samples from spruce sulfite pulp with degree of polymerization of about 500 even in a scale of 50 g. The allyl cellulose samples were characterized by means of FTIR- and NMR spectroscopy. Size exclusion chromatography revealed negligible polymer degradation during synthesis and purification of the samples.