Characterising the energy deposition events produced by trapped protons in low earth orbit

Men and equipment in space vehicles in low earth orbit are exposed to a wide variety of radiations, but the majority of the dose is due to trapped protons, which have energies of the order of 100 MeV and are low LET particles. These high energy particles produce nuclear fragmentation with high LET secondaries that may be responsible for a significant fraction of dose equivalent. In order to understand better the biological effectiveness of this radiation environment, a portable tissue equivalent proportional counter spectrometer has been developed that automatically records the distribution of energy in a small tissue-like site as a function of time. This instrument weighs about 700 g and will be flown on a number of future space shuttle flights.     

Specific heat at constant flux density for a low-κ type II superconductor

The specific heat at constant flux densityC _B was measured to study the thermodynamic properties of the mixed state of a type II superconductor at low reduced temperaturet=T/T _c . The sample was a Pb_0.96Tl_0.04 alloy having =0.97. The results are thatC _B increases nearly linearly withB throughout the mixed state, with a discontinuous jump down to the normal state value at the upper critical field. Att<0.21 a small, positive curvature ofC _B versusB is consistent with Eilenberger's calculations. However, this positive curvature is not consistent with fluxoid interaction models for low flux density. These measurements supplement previous measurements fort<0.5 using isothermal calorimetry on the same sample. Taken together, the two experiments indicate that, at a givenT, the incremental entropy per fluxoid is nearly constant for allB. This result forces some interesting empirical relationships among the parameters that characterize the mixed state.On sabbatical leave from South Dakota School of Mines and Technology, Rapid City, South Dakota.     

Clinical biochemistry and pathology of mature beef cattle following ante-mortem intravenous administration of a commercial papain preparation

Ten healthy beef cattle in a commercial abbatoir were treated intravenously before slaughter with a commercial papain-based tenderising injection (Pro Ten). Animals were observed for behavioural and clinical abnormalities following treatment. Serum enzyme activities were measured pre-treatment and post-treatment immediately pre-slaughter < 6 min later to detect liver and muscle damage. Carcases were examined grossly post mortem. Histological examination of liver, kidney and muscle followed. Nine contemporary, age-matched controls were similarly examined. It was concluded that ProTen treatment did not cause any detectable hepatocellular or renal damage and there was no significant difference in the parameters examined between treated and untreated cattle. A decision to ban the use of ProTen in cattle could not therefore be based on the premise that it interfered with the animal's welfare in the period following injection under the conditions pertaining in this experiment.     

Elucidation of the miniemulsion stabilization mechanism and polymerization kinetics

Styrene/hexadecane miniemulsions were polymerized at 50°C using a redox initiator. The miniemulsions and their corresponding latexes were characterized in terms of size, polymerization rate, and surface properties. The resulting data were analyzed to elucidate the miniemulsion stabilization and polymerization mechanisms. It was found that the free surfactant concentration exceeded the critical micelle concentration when large amounts of surfactant (60 mM sodium lauryl sulfate) were used, resulting in simultaneous micellar and droplet nucleation. Most surfactant was on the surface of the droplets (85%) or particles (95%). The fractional surface coverage was proportional to the surfactant concentration to the 0.55 power. Using a particle diameter equation, the number of particles was calculated to be proportional to the surfactant concentration to the 1.35 power. Through direct particle size measurements, a power of 1.38 was confirmed. The rate of polymerization was determined by reaction calorimetry to be proportional to the number of particles to the 0.59 power, in contrast to classical Smith–Ewart kinetics for conventional emulsions (1.0 power). The average number of radicals per particle was estimated from the rate and number data, and varied with the particle diameter to the 0.97 power. The observed kinetic dependencies were validated through an extension of Smith–Ewart theory. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3987–3993, 2003     

HIGHER ORDER MOMENTS OF SAMPLE AUTOCOVARIANCES AND SAMPLE AUTOCORRELATIONS FROM AN INDEPENDENT TIME SERIES

Abstract. Given length- n sampled time series, generated by an independent distributed process, in this paper we treat the problem of determining the greatest order, in n , that moments of the sample autocovariances and sample autocorrelations can attain. For the sample autocovariance moments, we achieve quite general results; but, for the autocorrelation moments, we restrict study to Gaussian white noise (normal, independent and identically distributed). Our main theorem relates to the cross-moments of the non-centred sample autocovariances, but we also establish a relation between these and the corresponding moments for the centred sample autocovariances.     

Dynamic mechanical properties of polycarbonate and acrylonitrile–butadiene–styrene copolymer blends

Blends of polycarbonate (PC) and poly(acrylonitrile‐co‐butadiene‐co‐styrene) (ABS) with different compositions are characterized by means of dynamic mechanical measurements. The samples show phase separation. The shift in the temperatures of the main dynamic mechanical relaxation shown by the blend with respect to those of the pure components is attributed to the migration of oligomers present in the ABS toward the PC in the melt blending process. A comparison with other techniques (dielectric and calorimetric analysis) and the application of the Takayanagi three block model confirm this hypothesis. In all the studied blend compositions (ABS weight up to 28.6%) the PC appears as the matrix where a disperse phase of ABS is present. The scanning and transmission electron microscopy micrographs show that the size of the ABS particles increases when the proportion of ABS in the blend increases. The FTIR results indicate that the interaction between both components are nonpolar in nature and can be enhanced by the preparation procedure. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1507–1516, 2002     

Parameter Estimation for Periodically Stationary Time Series

Abstract. The innovations algorithm can be used to obtain parameter estimates for periodically stationary time series models. In this paper, we compute the asymptotic distribution for these estimates in the case, where the innovations have a finite fourth moment. These asymptotic results are useful to determine which model parameters are significant. In the process, we also develop asymptotics for the Yule–Walker estimates.     

Hysteresis effects with ZrO2 oxygen sensors exposed to non-equilibrium oxygen-hydrocarbon mixtures

Hysteresis effects are reported for ZrO₂ oxygen sensors exposed to non-equilibrium oxygen/hydrocarbon gas mixtures. With oxygen/toluene at 800° C, voltage-composition curves differ following composition changes (a) from excess oxygen to excess toluene and (b) from excess toluene to excess oxygen. A catalysis model is developed to account for this behaviour: the Thiele modulus of the catalyst/electrode is presumed to differ under (a) net oxidizing and (b) net reducing conditions. Large scale voltage fluctuations, sometimes exceeding 400 mV, were observed in experiments with oxygen/isobutane mixtures at 600° C. This behaviour is analysed in terms of a kinetic model involving stochastic variations of relative mass transfer coefficients of oxygen and isobutane.