Failure of Titanium Condenser Tubes After 24 Years Power Plant Service

The titanium condenser has been in operation for 24 years at Amager unit 3 power plant. In February 2012, the plant was contaminated by seawater due to a failed condenser tube and some tubes were plugged. A month later, the plant tripped again. Small leaks were found again and finally approx. 200 tubes were plugged before the condenser was in service again. A series of inspections, NDT, and destructive examinations were conducted to try and understand the cause of failure in the tubes within the condenser. After such investigations, degradation mechanisms such as inner fouling, steam impingement, and fretting/erosion around the supports could be discounted. Ductile cracks were found in the tube within the tubesheet. From circumstantial evidence, it was concluded that failure was caused by a semi-filled condenser which led to a mismatch in expansion coefficients of filled tubes and unfilled tubes during a plant trip. In addition, small amounts of titanium hydride were revealed to be present in the tubes within the tubesheet indicating that the carbon steel tubesheet was corroding due to ingress of salt water. Although this was not the reason for the failure, it indicated the need for repair of the epoxy coating in the waterbox.     

Muscle decomposition and recruitment criteria influence muscle force estimates

It has recently been pointed out that muscle decomposition influence muscle force estimates in musculoskeletal simulations. We show analytically and with numerical simulations that this influence depends on the recruitment criteria. Moreover, we also show that the proper choices of force normalization factors may overcome the issue. Such factors for the minmax and the polynomial criteria are presented.     

Superior self-paced memorization of digits in spite of a normal digit span: The structure of a memorist’s skill.

Over the last century many individuals with exceptional memory have been studied and tested in the laboratory. This article studies Chao Lu, who set a Guinness World Record by memorizing 67,890 decimals of pi. Chao Lu’s superior self-paced memorization of digits is shown through analyses of study times and verbal reports to be mediated by mnemonic encoding and retrieval processes. Furthermore, Chao Lu’s development of his superior memory for decimals of pi is consistent with his engagement in thousands of hours of memorization. In contrast to most other studied memorists, who have digit spans over 15 digits, Chao Lu exhibited a digit span in only the normal range. Implications for different types of memorization skills and associated practice activities are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The nature of polymer grafts and substrate shape on the surface degradation of poly(l‐lactide)

Surface grafting of functional polymers is an effective method to alter material properties and degradation behavior. Two different substrate shapes of poly(l ‐lactide) (PLLA), i.e., films and microparticles, were surface‐grafted with hydrophilic monomers, and their surface degradation was monitored. Surface grafting with a hydrophilic and acidic polymer graft [acrylic acid (AA)] induced large alterations in the surface morphology and topography of the films. In contrast, hydrophilic and neutral polymer grafts [acrylamide (AAm)] had no significant effect on the surface degradation behavior, while the PLLA reference and co‐monomeric (AA/AAm) polymer‐grafted samples exhibited intermediate surface degradation rates. The grafted PAA chains induced a local acidic environment on the surface of the substrates, which in turn catalyzed the surface degradation process. This effect was more pronounced in the films than in the microparticles. Thus, the nature of the grafted chains and substrate geometry were shown to affect the surface degradation behavior of PLLA substrates. © 2015 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42736.     

Associations between driving under the influence of alcohol or drugs,speeding and seatbelt use among fatally injured car drivers in Norway

Since 2005, all fatal road traffic crashes in Norway have been analyzed in-depth by multidisciplinary investigation teams organized by the Norwegian Public Roads Administration (NPRA). During the period 2005–2010, 608 drivers of cars or vans were killed in road traffic crashes. Blood samples were collected from 372 (61%) of the drivers and analyzed for alcohol and a large number of psychoactive drugs at the Norwegian Institute of Public Health (NIPH). After coupling the analytical results with the NPRA crash database, 369 drivers with a fatal outcome were identified and included. Alcohol or drug concentrations in blood above the legal limits were found in 39.8% of the drivers who were investigated for alcohol or drug impairment; 33.9% had blood alcohol concentrations above 0.5 g/L or concentrations of drugs above the equivalent Norwegian legal impairment limits or concentrations of amphetamines above 200 μg/L. Among drivers with a fatal outcome who had been impaired by alcohol or drugs, 64.6% were unbelted and 71.7% were speeding when the crash occurred; whereas 24.2% and 33.2% of the sober drivers were unbelted or speeding, respectively. Statistically significant associations were found between impairment by alcohol or amphetamines and driving unbelted or speeding. Excessive speeding is one of the main reasons for road traffic crashes and together with being unbelted the main reasons for a fatal outcome. This behavior might in many cases be due to increased risk-taking or negligence of safety measures as a result of alcohol or drug use.     

Are Perceived Sensory Dimensions a Reliable Tool for Urban Green Space Assessment and Planning?

Environmental psychologists have developed varying methods for landscape assessment according to how it is perceived and experienced. In the Nordic countries, eight perceived sensory dimensions are increasingly being used as a methodological framework for expert assessments. These are serene, nature, rich in species, space, prospect, refuge, social and culture. Using an onsite questionnaire distributed to green space visitors in Helsingborg, Sweden, this study is the first to examine the representation of the eight sensory dimensions in different types of urban green spaces as experienced by lay people and their relationships with green space attributes. The results showed that (1) prospect then serene and space were the most common, and culture and social the least; (2) the experience of the sensory dimensions varied across the six study sites and was related to their diversity of biotopes and overall size; and (3) respondent experience of the sensory dimensions was consistent across gender, age and frequency and type of recreational use. These results grant legitimacy to the method in assessment and mapping of recreational experience of urban green space.     

Analysis of particle cloud height dynamics in a stirred tank

Local and temporal variations of the particle cloud formed in a cylindrical mixing vessel were investigated experimentally. Different particle sizes (0.5, 1, and 2 mm) and volumetric concentration up to 20 vol % were evaluated at different impeller speeds. The time‐averaged cloud height was linear with impeller frequency and with volume concentration. Suspensions with larger particles had a lower average cloud height, while the standard deviation for the temporal cloud height variation was larger. Two strong periodic phenomena were identified to be dominating the particle cloud height variations. The frequencies were linear with impeller speed, resulting in dimensionless frequencies of S₁=0.02–0.03 and S₂=0.05–0.06. The frequencies were affected by neither the particle size nor the volumetric concentration. The amplitude showed no dependency on the particle size, but the S₂ amplitude significantly decreases and S₁ increases with increasing solid concentration. The results were compared to LES/discrete element method simulations and showed a fair agreement. © 2015 American Institute of Chemical Engineers AIChE J, 62: 338–348, 2016     

Geothermal use of an Alpine aquifer—Davos pilot study

Grundwasser - Topographically induced Alpine regional groundwater flow systems below the unconsolidated valley fillings constitute a substantial unused geothermal resource. Within the...     

Untersuchungen zur Thermischen Umsetzung von Phenylcyclopentan, -hexan, -heptan und -octan in der Gasphase

Studies on Thermal Conversion of Phenyleyclopentane, -hexane, -heptane, and -octane in the Gas Phase The title compounds were pyrolyzed from 700 to 780°C in a metallic laboratory tubular reactor in the presence of steam. The reaction products were analyzed by gas chromatography and by a combination of gas chromatography and mass spectrometry. From the phenylcyclanes tested, more than 65 hydrocarbons could be detected in the liquids, besides gaseous reaction products. In most cases unambiguous structures could be derived by using different analytical methods. As typical initial-step products phenylcyclenes, ω-phenyl-1-alkenes and 1-phenyl-1-alkenes are formed by dehydrogenation and isomerization of the title compounds. The detection of phenylalkenes corresponds well with the isomerization of unsubstituted cyclanes to the corresponding α-olefines described in former papers.