In situ observation of synthesized nanoparticles in ultra-dilute aerosols via X-ray scattering

In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N₂ gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 10⁵ particles/cm³) corresponding to a volume fraction below 3 × 10^–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.

     

New CAMAC based data acquisition and beam control system for Lund nuclear microprobe

A new CAMAC based data acquisition system has been installed at the Lund Nuclear Microprobe facility. This paper reports on the development and present status of the data acquisition system. The system is a true multiparameter CAMAC based system with fast Fera bus readout and in crate memory buffer. The user interface is based on Sparrow Kmax software for a Power Macintosh platform. The system read out and tag the event data with position on-line, which make fast on-line monitoring of spectra or element maps possible.Simultaneously, all data can be saved event by event for off-line analysis. The beam scanning part is software controlled through a timed D/A converter, this allows fast scanning of the beam. With a CCD-camera and video card the area to be analysed could be defined directly from the image, and the sample position can be moved. Any kind of irregular scan patterns could be defined.     

Broccoli leaf powder as an attractive by-product ingredient: effect on batter behaviour,technological properties and sensory quality of gluten-free mini sponge cake

Broccoli by-products, in particular leaves, are rich sources of nutritional and bioactive components thus could constitute a valuable food additive. Although an upsurge in quantity of gluten-free products is observed further studies are required on improvement of their nutritional quality and palatability. This study aimed to investigate the influence of broccoli leaf powder (BLP) on dough behaviour, and technological characteristics and sensory quality of gluten-free mini sponge cake (GFS). Broccoli leaf powder replaced an equivalent amount (2.5%, 5%, 7.5%; w/w) of corn and potato starches in GFS formulation. Applied BLP increased the instrumental firmness of GFS but sensorial attributes (elasticity, crustiness, mastication and adhesiveness) were similar to the control. All broccoli GFS were vividly green, had small size pores properly distributed. Among them, sample with 2.5% BLP was distinguished for its desirable sensory quality, despite a slightly perceived cabbage aroma and taste. Moderate amount of BLP allows to preserve a good quality GFS improving its attractiveness and palatability.     

Pt‐Free Counter Electrode for Dye‐Sensitized Solar Cells with High Efficiency

Dye‐sensitized solar cells (DSSCs) have attracted widespread attention in recent years as potential cost‐effective alternatives to silicon‐based and thin‐film solar cells. Within typical DSSCs, the counter electrode (CE) is vital to collect electrons from the external circuit and catalyze the I₃^? reduction in the electrolyte. Careful design of the CEs can improve the catalytic activity and chemical stability associated with the liquid redox electrolyte used in most cells. In this Progress Report, advances made by our groups in the development of CEs for DSSCs are reviewed, highlighting important contributions that promise low‐cost, efficient, and robust DSSC systems. Specifically, we focus on the design of novel Pt‐free CE catalytic materials, including design ideas, fabrication approaches, characterization techniques, first‐principle density functional theory (DFT) calculations, ab‐initio Car‐Parrinello molecular dynamics (CPMD) simulations, and stability evaluations, that serve as practical alternatives to conventional noble metal Pt electrodes. We stress the merits and demerits of well‐designed Pt‐free CEs, such as carbon materials, conductive polymers, transition metal compounds (TMCs) and their corresponding hybrids. Also, the prospects and challenges of alternative Pt catalysts for their applications in new‐type DSSCs and other catalytic fields are discussed.     

Numerical assessment of the loading of rolling contact fatigue cracks close to rail surface irregularities

Rolling contact fatigue damage of railway rails in the form of squats, characterised by local depressions and cracks located at the rail surface, has been linked to the occurrence of local rail surface irregularities. This study concerns rolling contact fatigue cracks in the vicinity of fairly smooth surface irregularities, here denoted dimples. The influence of factors such as dimple geometry, cluster effects, and crack size is evaluated. To this end, dynamic vehicle–track simulations featuring realistic wheel and rail profiles are employed to characterise the dynamic impact during a wheel passage. The contact load in the vicinity of the dimples is then mapped onto a 3D finite element model of a rail section containing a crack in the rail head. The crack loading is finally quantified by multimodal stress intensity factors. The analyses establish that also shallow dimples might have a significant impact on the crack loading. This effect is increased for larger or multiple irregularities but decreases as the crack grows.     

为什么要实行区域供热?

北欧国家以其高度发达的区域供热基础设施及能源效率高而闻名于全世界。丹麦的区域供热尤其著名，在20年中区域供热占丹麦整个热力市场的份额翻了一倍，从30％增加到了60％。同时，区域供域生产的效率大大提高，在整个热力生产中余热资源和热电联产(CHP)的利用率达到了90％。     

Removal of estrogenicity in Swedish municipal sewage treatment plants

The human estrogen receptor alpha-test, hosted in a yeast strain, was used to quantify estrogenicity in three-week composite samples of untreated and treated effluents from 20 Swedish municipal sewage treatment plants. The treatment plants were selected to represent different treatment processes regarding chemical precipitation and microbial procedures. The discharge from Swedish domestic sewage treatment plants contained estrogenic compounds corresponding to <0.1-15 ng estradiol equivalents/L. Low levels of estrogenic activity were also found in a river receiving municipal effluents, 3.5-35 km downstream the outlet from a sewage treatment works. The range of estrogenicity in untreated, raw sewage effluents was found to be 1-30 ng estradiol equivalents/L. Generally, wastewater treatment reduced the estrogenicity and extended biological treatment was most effective in its removal. Activated sludge treatment tended to be more effective than trickling filters, whereas chemical precipitation using iron or aluminium salts without biological treatment showed little effectivity. The study showed that treatment methods in current use are able to eliminate or largely reduce estrogenicity in domestic wastewater.     

Resuspension and settling of helminth eggs in water: Interactions with cohesive sediments

Helminth parasite eggs in low quality water represent main food safety and health hazards and are therefore important indicators used to determine whether such water can be used for irrigation. Through sedimentation helminth eggs accumulate in the sediment, however resuspension of deposited helminth eggs will lead to increased concentration of suspended eggs in the water. Our study aimed to determine the erodibility (erosion rate and erosion threshold) and settling velocity of Ascaris and Trichuris eggs as well as cohesive sediment at different time points after incorporation into the sediment. Cohesive sediment collected from a freshwater stream was used to prepare a sediment bed onto which helminth eggs were allowed to settle. The erodibility of both sediment and helminth eggs was found to decrease over time indicating that the eggs were incorporated into the surface material of the bed and that this material was stabilized through time. This interaction between eggs and bulk sediment was further manifested in an increased settling velocity of suspended eggs when sediment was present in the suspension as compared to a situation with settling in clean water. The incorporation into the sediment bed and the aggregation with sediment particles decrease the mobility of both helminth egg types. Our findings document that helminth eggs should not be viewed as single entities in water systems when modelling the distribution of eggs since both erodibility and settling velocity of eggs are determined by mobility of the sediment present in the water stream. Recalculation of the erosion threshold for helminth eggs and sediment showed that even at relatively low current velocities i.e. 0.07-0.12 m s⁻¹ newly deposited eggs will be mobile in open irrigation channels. These environmental factors affecting resuspension must be taken into account when developing models for sedimentation of helminth eggs in different water systems.     

Influence of Grain Refinement on Slurry Formation and Surface Segregation in Semi-solid Al-7Si-0.3Mg Castings

This study aims to evaluate the effect of grain refinement on slurry formation and surface segregation in semi-solid castings produced by the Rheometal™ process. The effect of two grain refiners, Al-8B and Al-5Ti-1B, on the slurry α-Al grain size, shape factor and solid fraction was evaluated. The results suggest that the addition of a grain refiner can affect the solid fraction obtained in the Rheometal^TM process and, consequently, reduce the solute content near the casting surface. Grain refiner addition resulted in a larger fraction of α-Al grains ≤ 60 µm for the refined alloys compared with the unrefined alloy. Additionally, the growth of α-Al slurry globules was greater for the unrefined alloy compared with the refined alloy during solidification in the die-cavity. A more homogeneous and finer microstructure was observed near the surface in the grain-refined castings compared with the unrefined castings. Evidence of significant liquid penetration was identified in some α-Al globules, indicating that disintegration of α-Al globules may occur during the Rheometal™ casting process.