High throughput cellular biosensor for the ultra-sensitive,ultra-rapid detection of aflatoxin M1

The aim of this study was the development of a rapid novel biosensor system based on the Bioelectric Recognition Assay (BERA) for the detection of aflatoxin M1 (AFM1). Membrane-engineering was achieved by electroinsertion of AFM1-homologous antibodies into the membrane of the cells. The sensor measured the electric response of cultured membrane-engineered fibroblast cells suspended in an alginate gel matrix due to the change of their membrane potential after the interaction of the analyte molecules with the antibodies. The BERA-based sensor was able to detect AFM1 rapidly (3min) at very low concentrations (5 pg/ml = 5 ppt), thus demonstrating a higher sensitivity than most currently available biosensor-based methods. In addition, the assay was quite selective against other aflatoxins, such as aflatoxin B1 and ochratoxin A. Furthermore, the assay system allowed for high throughput AFM1 analysis (160 individual tests/h), due to its multiple cell–electrode interface array. Although further research is required for the optimization of the assay, the elimination of possible matrix effects and its validation by assaying actual food samples, this novel biosensor offers new perspectives for ultra-rapid, ultra-sensitive and low-cost monitoring of mycotoxins in food commodities.     

Alleviation of stuck wine fermentations using salt‐preconditioned yeast

The influence of salt (sodium chloride) on the cell physiology of wine yeast was investigated. Cellular viability and population growth of three wine‐making yeast strains of Saccharomyces cerevisiae, and two non‐Saccharomyces yeast strains associated with wine must microflora (Kluyveromyces thermotolerans and K. marxianus) were evaluated following salt pre‐treatments. Yeast cells growing in glucose defined media exposed to different sodium chloride concentrations (4, 6 and 10% w/v) exhibited enhanced viabilities compared with nontreated cultures in subsequent trial fermentations. Salt ‘preconditioning’ of wine yeast seed cultures was also shown to alleviate stuck and sluggish fermentations at the winery scale, indicating potential benefits for industrial fermentation processes. It is hypothesized that salt induces specific osmostress response genes to enable yeast cells to better tolerate the rigours of fermentation, particularly in high sugar and alcohol concentrations. Copyright © 2014 The Institute of Brewing & Distilling     

Energy sector pricing: On the role of neglected nonlinearity

Modern economies have been subjected to a number of shocks during the past several years such as the burst of the Internet bubble, terrorist attacks, corporate scandals, the war in Iraq, the uncertainty about energy prices, and the recent subprime mortgage crisis. In particular, during the last few years, the energy shock has caused concerns for potential stagflation for both the United States and numerous other countries. We perform numerous univariate tests for non-linearity and chaotic structure using price data from the energy sector to resolve whether the sector's fundamentals or exogenous shocks drive these prices.     

The effect of liquid smoking of fillets of trout (Salmo gairdnerii) on sensory,microbiological and chemical changes during chilled storage

The storage time at 4 ± 1 °C of liquid smoked fillets of trout (Salmo gairdnerii) produced with a new smoking technique, using a combination of liquid smoke and steaming at 2 bar pressure for 30, 45 and 60 min, was studied. Maximum total viable counts (TVC) were reached after 25 days in the samples processed for 30 min and after 48 days in those processed for 45 and 60 min. However, panellists rejected the samples long after maximum TVC was observed. The increase of TVC was also confirmed using a particle size analyser, indicating a possible direct detection of microbial growth. A reduction of about 50% in the C22:6n − 3/C16:0 ratio was found across the whole period of storage, indicating lipid oxidation. The hypoxanthine/inosine (Hx/Ino) ratio showed a good relationship with both TVC and sensory results. Thus, when the Hx/Ino ratio was higher than 1.3, the products had reached their maximum acceptable TVC and were approaching their rejection time by the panellists, indicating that the Hx/Ino ratio is a good indicator of the shelf-life of smoked products of trout (S. gairdnerii).     

A CFD methodology for the design of sedimentation tanks in potable water treatment: Case study: The influence of a feed flow control baffle

Computational fluid dynamics simulations are employed to assess the effect of adding a vertical baffle at the feed section of a full-scale sedimentation tank for the improvement of solids settling in potable water treatment. A general CFD-based simulation strategy is developed based on the specific features and conditions met in practice for potable water treatment. The linearity of the particle conservation equations allows separate calculations for each particle size class – but performed for all classes of interest – leading to the uncoupling of the CFD problem from a particular inlet particle size distribution. The usually unknown and difficult to be measured particle density is found by matching the theoretical to the easily measured experimental total settling efficiency. The proposed strategy is computationally much more efficient than the corresponding strategies used for the simulation of wastewater treatment. This work compares simulations from a standard and a baffle-equipped tank. It is found that the baffle decreases the inlet recirculation zone and enhances the settling of solids by directing them towards the bottom of the tank with high velocities. It is noteworthy that even small differences in the particle velocity can cause large changes in the percent of settled particles; in this work, the overall solids removal efficiency increased when using the baffle from 90.4 to 98.6% leading to a reduction of the effluent solids concentration of approximately 85%.     

Square‐root Nyquist FIR filter synthesis for QAM modems

An optimal joint method for digital FIR filters synthesis used in PSK and QAM modulators and demodulators is proposed. It is based on the criterion of demodulation energy loss minimization (bit‐error rate minimization). The analysis of energy loss of demodulation is developed and the objective function for energy loss minimization is obtained. The synthesis is carried out for fixed filter lengths, signal‐to‐noise ratio at the input of demodulator, carrier spacing between adjacent channels, and relative powers between considered and adjacent channels. This method does not require the introduction of any other weighting coefficients or functions for synthesis. Copyright © 2000 John Wiley & Sons, Ltd.     

Regulator of G-Protein Signaling-4 Attenuates Cardiac Adverse Remodeling and Neuronal Norepinephrine Release-Promoting Free Fatty Acid Receptor FFAR3 Signaling

Propionic acid is a cell nutrient but also a stimulus for cellular signaling. Free fatty acid receptor (FFAR)-3, also known as GPR41, is a Gi/o protein-coupled receptor (GPCR) that mediates some of the propionate’s actions in cells, such as inflammation, fibrosis, and increased firing/norepinephrine release from peripheral sympathetic neurons. The regulator of G-protein Signaling (RGS)-4 inactivates (terminates) both Gi/o- and Gq-protein signaling and, in the heart, protects against atrial fibrillation via calcium signaling attenuation. RGS4 activity is stimulated by β-adrenergic receptors (ARs) via protein kinase A (PKA)-dependent phosphorylation. Herein, we examined whether RGS4 modulates cardiac FFAR3 signaling/function. We report that RGS4 is essential for dampening of FFAR3 signaling in H9c2 cardiomyocytes, since siRNA-mediated RGS4 depletion significantly enhanced propionate-dependent cAMP lowering, Gi/o activation, p38 MAPK activation, pro-inflammatory interleukin (IL)-1β and IL-6 production, and pro-fibrotic transforming growth factor (TGF)-β synthesis. Additionally, catecholamine pretreatment blocked propionic acid/FFAR3 signaling via PKA-dependent activation of RGS4 in H9c2 cardiomyocytes. Finally, RGS4 opposes FFAR3-dependent norepinephrine release from sympathetic-like neurons (differentiated Neuro-2a cells) co-cultured with H9c2 cardiomyocytes, thereby preserving the functional βAR number of the cardiomyocytes. In conclusion, RGS4 appears essential for propionate/FFAR3 signaling attenuation in both cardiomyocytes and sympathetic neurons, leading to cardioprotection against inflammation/adverse remodeling and to sympatholysis, respectively.     

A compound real option and AHP methodology for evaluating ICT business alternatives

After the liberalization of information and communication technology (ICT) markets many potential providers have appeared. Thus, business complexity, for ICT decision makers, has increased. In this paper, we focus on the problem of selecting the optimal business evolution path for ICT, focusing on the broadband technology (BT) field. Traditional quantitative cost–benefits analysis, such as net present value (NPV), is by no means sufficient for capturing the complexity of the problem in its entire. Researchers suggest the real options (ROs) for valuating ICT investments. However, RO models are strictly quantitative and very often ICT investments may also contain qualitative factors, which cannot be quantified in monetary terms. In addition, ROs analysis itself brings to the “surface” some factors that can be more efficiently treated qualitatively. We combine the ROs and analytic hierarchy process (AHP) into a common decision analysis framework providing an integrated multicriteria model, called ROAHP, for prioritizing ICT business alternatives. The proposed model is applied to a real life BT business case, showing how it can be formulated and solved.     

Experimental investigation of R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints under CA loading

A series of fatigue experiments was performed in order to investigate the effect of the R-ratio on the fatigue/fracture behavior of adhesively-bonded pultruded GFRP double cantilever beam joints. Constant amplitude fatigue experiments were carried out under displacement control with a frequency of 5 Hz in ambient laboratory conditions. Three different R-ratios were applied: R = 0.1, R = 0.5 and R = 0.8. The crack length was determined by means of crack gages and a dynamic compliance method. The dominant failure mode was a fiber-tear failure that occurred in the mat layers of the pultruded laminates. The depth of the crack location significantly affected the energy dissipated for the fracture under cyclic loading. Short-fiber and roving bridging increased the fracture resistance during crack propagation. Fatigue crack growth curves were derived for each R-ratio and each observed crack path location. The fatigue threshold and slope of the fatigue crack growth curve significantly increased with increased R-ratio.