Heat transfer and performance characteristics of axial cooling fans with downstream guide vanes

This study examines experimentally the effect of stators on the performance and heat transfer characteristics of small axial cooling fans. A single fan impeller, followed by nine stator blades in the case of a complete stage, was used for all the experimental configurations. Performance measurements were carried out in a constant speed stage performance test rig while the transient liquid crystal technique was used for the heat transfer measurements. Full surface heat transfer coefficient distributions were obtained by recording the temperature history of liquid crystals on a target plate. The experimental data indicated that the results are highly affected by the flow conditions at the fan outlet. Stators can be beneficial in terms of pressure drop and efficiency, and thus more economical operation, as well as, in the local heat transfer distribution at the wake of the stator blades if the fan is installed very close to the cooling object. However, as the separation distance increases, enhanced heat transfer rate in the order of 25% is observed in the case of the fan impeller.     

Modelling flow and filtration in liquid composite moulding of nanoparticle loaded thermosets

This paper presents analytical and numerical models of liquid moulding of hybrid composites. An 1-D analytical solution of Darcy’s problem, accompanied by nanoparticle filtration kinetics and conservation, has been developed. A non-linear finite difference model incorporating variations in permeability, porosity and viscosity as a function of local nanoparticle loading was formulated. Comparison of the two models allowed verification of their validity, whilst a mesh sensitivity study demonstrated the convergence of the numerical scheme. The limits of validity of the analytical solution were established over a range of infiltration lengths and filtration rates for different nanoparticle loadings. The analytical model provides an accurate and efficient approximation of through thickness infusion of hybrid composites, whereas use of the numerical scheme is necessary for accurate simulation of in-plane filling processes. The models developed here can serve as the basis of process design/optimisation for the production of hybrid composites with controlled distribution of nano-reinforcement.     

RTM processing and electrical performance of carbon nanotube modified epoxy/fibre composites

This investigation focuses on nanoparticle filtration in the processing of multiscale carbon and glass fibre composites via resin transfer moulding. Surface modified and unmodified carbon nanotubes (CNTs) were incorporated into a commercial epoxy resin. The dispersion quality was evaluated using electrical measurements of the liquid suspensions. The manufacturing process was adapted to the challenges posed by the modified rheological behaviour of the CNT loaded resin. Nanoparticle filtration was observed; with some of the unmodified systems following so called ‘cake filtration’ behaviour. This resulted in nonlinear flow behaviour that deviated from the ideal response observed in RTM filling in conventional composites. The electrical conductivity of relatively high fibre volume fraction multiscale carbon and glass laminates increased by less than an order of magnitude with the addition of the nanotubes.     

Assessment of tremor activity in the Parkinson's disease using a set of wearable sensors

Tremor is the most common motor disorder of Parkinson's disease (PD) and consequently its detection plays a crucial role in the management and treatment of PD patients. The current diagnosis procedure is based on subject-dependent clinical assessment, which has a difficulty in capturing subtle tremor features. In this paper, an automated method for both resting and action/postural tremor assessment is proposed using a set of accelerometers mounted on different patient's body segments. The estimation of tremor type (resting/action postural) and severity is based on features extracted from the acquired signals and hidden Markov models. The method is evaluated using data collected from 23 subjects (18 PD patients and 5 control subjects). The obtained results verified that the proposed method successfully: 1) quantifies tremor severity with 87 % accuracy, 2) discriminates resting from postural tremor, and 3) discriminates tremor from other Parkinsonian motor symptoms during daily activities.     

In-depth analysis and evaluation of diffusive glioma models

Glioma is one of the most aggressive types of brain tumor. Several mathematical models have been developed during the past two decades, toward simulating the mechanisms that govern the development of glioma. The most common models use the diffusion-reaction equation (DRE) for simulating the spatiotemporal variation of tumor cell concentration. Nevertheless, despite the applications presented, there has been little work on studying the details of the mathematical solution and implementation of the 3-D diffusion model and presenting a qualitative analysis of the algorithmic results. This paper presents a complete mathematical framework on the solution of the DRE using different numerical schemes. This framework takes into account all characteristics of the latest models, such as brain tissue heterogeneity, anisotropic tumor cell migration, chemotherapy, and resection modeling. The different numerical schemes presented have been evaluated based upon the degree to which the DRE exact solution is approximated. Experiments have been conducted both on real datasets and a test case for which there is a known algebraic expression of the solution. Thus, it is possible to calculate the accuracy of the different models.     

Determination of Phthalates into Vegetable Oils by Isotopic Dilution Gas Chromatography Mass Spectrometry

The presented method for the determination of a number of phthalic acid esters into oily media is based on their extraction by acetonitrile with precipitation under freezing and subsequent solid-phase extraction using alumina. This technique was checked as the best procedure to separate lipophilic phthalates from fatty media achieving elimination of contamination by excess use of solvents. Extracted phthalates are determined in acetonitrile solutions with gas chromatography in conjunction to isotopic dilution mass spectrometry using D4 isotopic labeled derivatives. Full validation of the method was carried out and background effect was examined. Method calibration for extraction from oil resulted in limit of detection (LOD) of 7–10 ng g^?1 and limit of quantification (LOQ) of 20–50 ng g^?1 for DMP, DEP, DiBP, DBP, DEHP, and BBP and in LOD 500 ng g^?1 and LOQ of 1,500 ng g^?1 for DiNP and DiDP. Real samples of virgin olive oil from olive press establishments from three different areas were analyzed and the phthalates content was below detection limit for all phthalic esters under consideration for nonindustrial areas and in measurable concentrations for industrial areas specifically with regard to DiBP.     

The inhibitory potential of feed supplementation with rosemary and/or α-tocopheryl acetate on microbial growth and lipid oxidation of turkey breast during refrigerated storage

Twenty-four 12-week-old female turkeys divided into four equal groups were fed a basal diet (CONT) or basal diet supplemented with 300 mg α-tocopheryl acetate/kg (TOC), or 5 g rosemary/kg (ROS5), or 10 g rosemary/kg (ROS10), for 4 weeks. Following slaughter, fillets from breast were stored at 4 °C in the dark for 12 days, and lipid oxidation was assessed on the basis of the malondialdehyde formed, whereas microbial growth on the basis of total viable counts (TVC), lactic acid bacteria (LAB), Enterobacteriaceae (ENB) and psychrotrophic (PSY) bacteria. Results showed that incorporation of dried rosemary in turkey diets delayed lipid oxidation in raw breast meat during refrigerated storage. Dietary rosemary at the level of 1 g/100 g was significantly (P<0.05) more effective in delaying lipid oxidation compared to 0.5 g/100 g but inferior to the dietary supplementation of 300 mg α-tocopheryl acetate/kg. TVC, LAB, ENB and PSY bacterial counts were all significantly increased (P<0.05) in breast samples of all groups throughout the refrigerated storage. The TOC and CONT groups presented TVC, LAB, ENB and PSY counts that did not differ (P>0.05) among each other, during the whole storage period. However, the rosemary-supplemented groups presented bacterial counts that were significantly lower (P<0.05) than the CONT and TOC groups, at day 2 of storage period and thereafter. During this period, the ROS5 group presented TVC, LAB, ENB and PSY counts that were significantly higher (P<0.05) than the ROS10 group.     

Three-dimensional reconstruction of the digestive wall in capsule endoscopy videos using elastic video interpolation

Wireless capsule endoscopy is a revolutionary technology that allows physicians to examine the digestive tract of a human body in the minimum invasive way. Physicians can detect diseases such as blood-based abnormalities, polyps, ulcers, and Crohn's disease. Although this technology is really a marvel of our modern times, currently it suffers from two serious drawbacks: 1) frame rate is low (3 frames/s) and 2) no 3-D representation of the objects is captured from the camera of the capsule. In this paper we offer solutions (methodologies) that deal with each of the above issues improving the current technology without forcing hardware upgrades. These methodologies work synergistically to create smooth and visually friendly interpolated images from consecutive frames, while preserving the structure of the observed objects. They also extract and represent the texture of the surface of the digestive tract in 3-D. Thus the purpose of our methodology is not to reduce the time that the gastroenterologists need to spend to examine the video. On the contrary, the purpose is to enhance the video and therefore improve the viewing of the digestive tract leading to a more qualitative and efficient examination. The proposed work introduces 3-D capsule endoscopy textured results that have been welcomed by Digestive Specialists, Inc., Dayton, OH. Finally, illustrative results are given at the end of the paper.     

Combinatorial Treatment of Tinzaparin and Chemotherapy Can Induce a Significant Antitumor Effect in Pancreatic Cancer

Pancreatic Cancer (PC) is recognized as a highly thrombogenic tumor; thus, low-molecular-weight heparin (LMWH) such as tinzaparin is routinely used for PC patients. On the basis of combinatorial therapy approaches to treat highly malignant and refractory cancers such as PC, we hypothesized that tinzaparin can augment the effectiveness of traditional chemotherapeutic drugs and induce efficient antitumor activity. PANC-1 and MIAPaCa-2 were incubated alone or in combination with tinzaparin, nab-paclitaxel and gemcitabine. In vivo evaluation of these compounds was performed in a NOD/SCID mouse using a model injected with PANC-1. Tinzaparin enhances the anti-tumor effects of nab-paclitaxel and gemcitabine in mtKRAS PC cell lines via apoptosis in in vitro experiments. The triple combination power acts through the induction of apoptosis, reduction of the proliferative potential and angiogenesis; hence, contributing to a decrease in tumor volume observed in vivo. The triple regimen provided an extra 24.3% tumor reduction compared to the double combination (gemcitabine plus nab-paclitaxel). Combinatorial strategies can create novel therapeutic approaches for the treatment of patients with PC, achieving a better clinical outcome and prolonged survival. Further prospective randomized research is needed and the investigation of various concentrations of tinzaparin above 150 UI/Kg, would potentially provide a valuable synergistic effect to the conventional therapeutic compounds.