Increasing ethylene production as a high value hydrocarbon in Fischer-Tropsch (FT) reactor: A concept reactor for combining FT with oxidative coupling of methane

The paper proposes a concept configuration of reactors for coupling OCM and FTS, and presents systematic simulation results. FTS section is a combination of fixed bed and membrane fluidized bed reactor, and feed of the FT reactor is supplied by OCM. The reactor configuration is compared with the consecutive reactors of OCM and one fixed bed FT reactor. Effects of CH₄/O₂ ratio, percent of N₂ in the feed, contact time, and input temperature on the yield of ethylene and valuable hydrocarbons are studied. The results show that compared with one FTS reactor configuration, the dual FTS reactor configuration is more effective and thus gives much higher product yields. Furthermore, a main decrease is observed in the formation of CO₂ and CH₄.     

Electrospun biodegradable nanofibers scaffolds for bone tissue engineering

Many polymeric materials have been developed and introduced for bone regeneration. Especially, their nanofibrous forms are mostly applied for artificial extracellular matrices. Polymeric materials in their nanofibrous form show some potent properties such as high surface‐to‐volume ratio, tunable porosity, and ease of surface functionalization. Benefiting from the properties of their main polymer and additives, they can provide new opportunities for cell seeding, proliferation, and new 3D‐tissue formation. This article focuses on most cited polymeric nanofibrous scaffolds fabricated by electrospinning and recent achievements. They were divided into two main categories: natural (collagen, silk, keratin, gelatin, chitosan, and alginate) and synthetic (e.g., polycaprolactone, polylactic acid, and polyglycolic acid) polymers. The role of several additives like hydroxyapatite, bone morphogenetic proteins (BMPs), tricalcium phosphate, and collagen type I in improving the adhesion, differentiation, and tissue formation of stem cells were discussed. Finally, the osteogenic capacity and ability of nanofibrous scaffolds to support the growth of clinically relevant bone tissue were briefly studied. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42883.     

Simultaneous removal of copper and zinc ions by low cost natural snail shell/hydroxyapatite/chitosan composite

In this work, the snail shell/hydroxyapatite/chitosan composite was prepared as adsorbent. The adsorption potential of the composite was studied for simultaneous sorption behavior of Zn(Ⅱ) and Cu(Ⅱ) ions in a batch system. Chitosan and hydroxyapatite(HAP) were extracted from shrimp shell and bone ash,respectively, so this is a low cost natural composite. To prepare the composite, chitosan was dissolved in acetic acid, then HAP and snail shell powders were added to the chitosan solution. The morphology and characterization of the composite was studied by SEM and EDX analysis. Atomic adsorption was used to measure the amount of the ions. Experimental parameters were optimized with Design Expert Software and five parameters such as the concentration of ions, p H, adsorbent amount and contact time were studied at room temperature. Optimized value for the parameters of Zn(Ⅱ) and Cu(Ⅱ) concentrations, p H, adsorbent dose, and contact time were 3.01 mg·L~(-1), 5.5, 0.02 g and 95 min, respectively. The adsorption isotherms for Zn(Ⅱ) and Cu(Ⅱ) showed Langmuir and Tempkin, respectively. Kinetic and equilibrium studies showed the experimental data of Zn(Ⅱ) and Cu(Ⅱ) ions were best described by the pseudo-second-order model. Studies on thermodynamic show the adsorption process were physical and spontaneous.     

Comparison of electrothermal and hydride generation atomic absorption spectrometry for the determination of total arsenic in broiler chicken

The purpose of this study was to estimate total arsenic concentration in different tissues (leg, breast, liver and heart) of broiler chicken by hydride generation atomic absorption spectrometry (HGAAS) and graphite furnace atomic absorption spectrometry (GFAAS), prior to microwave assisted acid digestion. The accuracy of the techniques was evaluated by using certified reference material DORM-2. The percentage recoveries of total As were observed as 100.6% and 99.4% for HGAAS and GFAAS, respectively. The precision of the techniques, expressed as relative standard deviation, was observed as 1.71% and 4.18% for HGAAS and GFAAS measurements, respectively. The limits of detection for HGAAS and GFAAS were 0.025 μg/g and 0.052 μg/g, respectively. The concentrations of total arsenic in different tissues of broiler chicken were found in the range of 2.19–5.28, 2.15–5.22, 2.97–7.17 and 2.68–6.36 μg/g for leg, breast, liver and heart tissues, respectively. At a mean level of chicken consumption (60 g/person/day), people may ingest in the range of 72.0–85.1 μg arsenic/person/day from chicken alone.     

Al2O3 Colloidal Nanocrystals with Strong UV Emission

A facile sol–gel procedure has been developed for the synthesis of colloidal alumina nanocrystals. For the first time, optical characterization procedures were employed to study the quantum confinement effects in optical properties of the prepared Al₂O₃ sol. Accordingly, the hyperbolic band model was used to determine the optical band gap of colloidal alumina nanocrystals. X‐Ray diffraction pattern was used to study the crystallographic phase of the dried gel. Morphological characterization was performed using scanning electron microscopy (SEM). Inductively Coupled Plasma (ICP) emission spectroscopy was used to determination purity of the Al₂O₃ powder. High‐resolution TEM showed that the diameter of colloidal nanocrystals is about 10 nm. Photoluminescence spectroscopy demonstrated that quantum yields for colloidal nanocrystals are 68% with 300 nm excitation wavelength. The experimental observations confirm that highly stable alumina sol with strong UV emission was synthesized. The mentioned optical properties have not been reported before.     

Oxidative solution polymerization of aniline hydrochloride onto electrospun nanofibers mats of polylactic acid: Preparation method and characterization

In this work, we present the preparation of polylactic acid (PLLA)/polyaniline (PANI) conductive composite nanofibers mats. They are prepared by bulk oxidative solution polymerization of PANI onto electrospun non‐woven fibers mats of PLLA. The PANI ratio in the composite is about 70%w/w. Scanning electron microscopy (SEM) shows that PLLA nanofibers are randomly oriented, beads free with diameters of 186 ± 85 nm, The PLLA/PANI composite nanofibers diameter values are 518 ± 128 nm with a good adherence between PANI and PLLA nanofibers. DSC and XRD measurements reveal an amorphous structure of the electrospun PLLA fibers due to the rapid evaporization of the solvent. FTIR and UV–vis spectra reflect good mutual interactions between PANI and PLLA chains. The DC‐conductivities ( ) far better than other published ones for similar composites prepared by bulk oxidative solution polymerization of PANI onto other electrospun nanofiber mats or with electrospun nanofibers from a solution mixture of PLLA and PANI. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41618.     

The effect of microencapsulation with nitrocellulose on thermal properties of sodium azide particles

Based on the coacervation principle a solvent/non-solvent method has been used for microencapsulation of sodium azide (NaN₃) with fibrous nitrocellulose (NC). Scanning electron microscopy (SEM) was employed to examine the coating morphology. The thermal behavior of solid samples has been studied by means of thermogravimetry (TG) and differential scanning calorimetry (DSC). The results of TG–DTA analysis revealed that the main thermal degradation for the pure NC and NaN₃ occurs in the temperature ranges of 192–220 and 415–420 °C, respectively. The effects of some parameters, such as NC to NaN₃ weight ratio and volume and addition time of non-solvent, on coating quality and thermal properties have been investigated by SEM and thermal methods. The results of these experiments showed that the decomposition temperature of most stabilized coated sodium azide is about 50 °C higher than that of the pure sample. The DSC experiments were conducted to study the influence of the heating rate (5, 10, 15 and 20 °C/min) on the thermal decomposition processes of the pure NC, coated and pure NaN₃ samples. The results revealed that, as the heating rate was increased, decomposition temperature of the compounds was increased. Also, the kinetic parameters such as activation energy and frequency factor of the decomposition processes were obtained from the DSC data by non-isothermal methods proposed by ASTM E696 and Ozawa. Our finding showed that coated NaN₃ has lower decomposition rate with respect to the pure one.     

A robust unified approach to analyzing methylation and gene expression data

Microarray technology has made it possible to investigate expression levels, and more recently methylation signatures, of thousands of genes simultaneously, in a biological sample. Since more and more data from different biological systems or technological platforms are being generated at an incredible rate, there is an increasing need to develop statistical methods that are applicable to multiple data types and platforms. Motivated by such a need, a flexible finite mixture model that is applicable to methylation, gene expression, and potentially data from other biological systems, is proposed. Two major thrusts of this approach are to allow for a variable number of components in the mixture to capture non-biological variation and small biases, and to use a robust procedure for parameter estimation and probe classification. The method was applied to the analysis of methylation signatures of three breast cancer cell lines. It was also tested on three sets of expression microarray data to study its power and type I error rates. Comparison with a number of existing methods in the literature yielded very encouraging results; lower type I error rates and comparable/better power were achieved based on the limited study. Furthermore, the method also leads to more biologically interpretable results for the three breast cancer cell lines.     

Accurate analysis of spectral regrowth of nonlinear power amplifier driven by cyclostationary modulated signals

In this paper we present an exact analytical expression to calculate the spectral regrowth at the output of a nonlinear power amplifier (PA) using the higher order cumulants and Poisson summation formula. This PA is driven by the filtered digitally modulated signals. To improve the accuracy of the calculations, the cyclosationarity of the input signal is considered. Moreover, closed-form expressions for the 1-dB compression and saturation points are extracted as a function of the PA model parameters, higher order statistics of the input signal, and the transfer function of the pulse shaping filter. In addition, an analytical expression for the adjacent channel power (ACP) and a closed-form expression of the ACP ratio are derived. This is followed by investigation of the effect of the PA nonlinearity on the performance of receiver. Simulation studies are carried out to verify the accuracy of the derived expressions. Excellent agreement between the analytical and simulation results is achieved.