Alignment control for a long span urban rail-transit cable-stayed bridge considering dynamic train loads

In this paper, bridge alignment control with considering dynamic train loads was experimentally and theoretically investigated. Analytical process of bridge dynamics and the self-adaptive Kalman filter bridge alignment control method with considering the dynamic train loads were briefly introduced. The static measurement, the dynamic test, the field alignment measurement as well as the finite element analysis (FEA) of the second longest rail transit cable-stayed bridge in the world were carried out. Based on the results, the train dynamic load effect on the bridge alignment was obtained quantitatively. Subsequently, alignment control of the rail transit bridge with considering this effect using a self-adaptive Kalman filter method was analyzed. The results show that: (a) the dynamic train loads have effects on alignment control of the bridge and therefore cannot be neglected; (b) the self-adaptive Kalman filter method is applicable and reliable for alignment control of bridges during construction. The analytical method and whole process contribute to develop a related specification and further engineering applications.     

Thermal analysis of a solar parabolic trough receiver tube with porous insert optimized by coupling genetic algorithm and CFD

In this paper, the heat transfer enhancement in a solar parabolic trough receiver tube with porous insert and non-uniform heat flux condition was investigated. A new optimization method, which couples genetic algorithm (GA) and computational fluid dynamics (CFD) based on Socket communication, was proposed to optimize the configuration of porous insert. After the acquisition of the optimal porous inserts, some performance evaluation criterions such as synergy angle, entransy dissipation and exergy loss were introduced to discuss the heat transfer performance of the enhanced receiver tubes (ERTs) with optimal and referenced porous inserts. The results showed that, for a large range of properties of porous insert (including porosity and thermal conductivity) and Reynolds number, the heat-transfer performance of ERT with porous insert optimized by GA is always higher than that of the referenced ERTs. Better heat-transfer performance can further improve the solar-to-thermal energy conversion efficiency and mechanical property of the solar parabolic trough receiver. When some porous materials with high thermal conductivity are adopted, ERT can simultaneously obtain perfect thermal and thermo-hydraulic performance with using the same optimized porous insert, which cannot be achieved by using the referenced porous insert. In the view of those introduced evaluation criterions, using the optimized porous insert can obtain better synergy performance and lesser irreversibility of heat transfer than using the referenced porous insert. Entransy dissipation per unit energy transferred and exergy loss rate have equivalent effects on the evaluation of irreversibility of heat transfer process. These evaluation criterions can be used as optimization goals for enhancing the comprehensive performance of the solar parabolic trough receiver.     

High-speed photographic observation of collapse of two cavitation bubbles

Cavitation as a hydrodynamic phenomenon exists widely in water conservancy, shipbuilding, chemical and many other industries. Previous cavitation bubble dynamic studies mainly focused on single cavitation bubbles and their interaction with the wall. This paper studies the interaction between two cavitation bubbles under conditions with or without a wall. The results show that if the inception of two cavitation bubbles is not synchronized, the cavitation bubble of early inception collapse backwards the cavitation bubble of later inception; if the inception of two cavitation bubbles is synchronized, the two bubbles collapse towards each other; if a wall exists nearby, no matter whether the line connecting the centers of the two cavitation bubbles is vertical or parallel to the wall, the two cavitation bubbles collapse towards each other and then gradually merge, and the merged collapse body quickly moves to the wall. It is suggested that, as the number of cavitation bubbles increases, the cavitation erosion effect is not simply increased proportionally. Instead, mutual inhibitory effect may be demonstrated.     

An experimental investigation on acoustic emission characteristics of sandstone rockburst with different moisture contents

Rockburst occurred frequently during deep mining in China. The mechanism of rockburst is very complicated and related to many factors. In order to investigate the influence of moisture contents of rockmass on rockburst, we conducted a series of laboratory rockburst experiments of sandstone under three different moisture contents by the Modified True-Triaxial Apparatus (MTTA), in which the acoustic emission (AE) system was employed to monitor the internal damage of rock mass. A high-speed video camera was utilized to record the detail of rockburst. Based on the experimental results, the AE characteristics, such as AE count, AE energy, and AE frequency, were analyzed. The rockburst process, type, and indensity under different moisture contents were discussed. The research results show that with the increase of moisture contents, rock strength was soften, the elastic and the cumulative damage of the rock were reduced, resulting in a gradual decrease in AE cumulative counts and cumulative energy over the course of rockburst. This study provides an experimental basis and reference for better understanding to the rockburst mechanism and control.     

Taming complexity in nonlinear dynamical systems by recycled signal

In this paper, the impacts of the recycled signal on the dynamic complexity have been studied theoretically and numerically in a prototypical nonlinear dynamical system. The Melnikov theory is employed to determine the critical boundary, and the statistical complexity measure (SCM) is defined and calculated to quantify the dynamic complexity. It has been found that one can switch the dynamics from the periodic motion to a chaotic one or suppress the chaotic behavior to a periodic one, merely via adjusting the time delay or the amplitude of the recycled signal, therefore, providing a candidate to tame the dynamic complexity in nonlinear dynamical systems.     

Analytical investigation on thermal-induced warpage behavior of ultrathin chip-on-flex (UTCOF) assembly

The serious warpage issues of ultrathin chip-on-flex (UTCOF) assembly induced by mismatched thermal stresses have greatly affected the mechanical stability and reliability of emerging ultrathin chip packaging technology. Currently, a theoretical prediction as a convenient and straightforward approach is still lacked for describing effectively the thermal-mechanical behavior of UTCOF during the adhesive curing and cooling process. In consideration of the adhesive thickness approximating to ultrathin chip and flexible substrate thickness, we develop a layerwise-model of ultrathin chip-adhesive-flex structure under plain strain condition, where the behavior of thick adhesive bonding can be described precisely through increasing the subdivided mathematical plies. Further, the analytical results show that the concave and convex forms of ultrathin chip warpage yield at the end of the curing and cooling process respectively. Meanwhile, the effects of its structure dimensions and material properties are also revealed for discussing a way to relieve the extent of ultrathin chip warpage. Additionally, in order to verify the validity of the theoretical prediction, we also introduce the corresponding numerical technique and experimental method. These results suggest that a kind of rigid and ultrathin flexible substrate such as metal foil should be adopted for small warpage of ultrathin assembly.     

强噪声的大地电磁远参考去噪研究

根据实测的电磁场时间域波形和卡尼亚电阻率测深曲线形态,挑选出基本未受噪声污染的测点(Y1650),利用数学形态学从庐枞矿集区受严重污染的电磁场时间序列数据中提取出类方波、三角波、阶跃、脉冲和充放电5种典型噪声的波形,并以不同的方式将这些噪声波形与Y1650的电磁场波形叠加,应用远参考道技术对添加噪声后的数据进行处理,分析其对各种典型噪声的压制效果.研究表明,远参考方法能够在一定程度上消除随机噪声的影响,接近真实的视电阻率相位,而低频低相干度的远参考结果是有偏倚的,为了获得低频阻抗无偏估计,需要参与平均的数据足够大.     

Bone Tissue Response to the Bone-like Tissue Coating on Titanium

The objective of this study was to investigate the effects of mineralized bone nodules, formed in vitro by bone marrow stromal cells(BMSCs), on the new bone formation in bone defect and on implant surface. The mineralized bone nodules were generated by culture of Lewis rats BMSCs on titanium disks in osteogenic induction medium. The gap-healing animal model was used to create the bone defect facing the disk. The titanium disks in the presence of B group or in the absence of NB group bone nodules were randomly placed into one of the rat distal femurs. This self-control design was used to compare the bone formation in defects and on titanium surface, by Micro-CT, fluorescence staining, histological and histomorphometric analysis. The new bone formation parameters in bone defect area of B group were significantly higher than those of NB group at 2 weeks, including bone volume fraction, trabecular thickness and bone area ratio. The bone nodules pre-stained with Alizarin red disappeared mostly at 2 weeks, while the red fluorescence reappeared in the newly formed bone away from the disk surface. For the bone-implant contact, B group showed lower values than NB group at 2 weeks, but no significant difference was found at 4 weeks. Our results indicate that the mineralized bone nodules can be resorbed in vivo and promote the early osteogenesis in the bone defects, and bone nodules may be applicable for new bone generation in bone defect or modification of tissue engineering scaffold.     

一种双U形缺陷地结构低通滤波器的设计

基于双U形缺陷地结构设计了一种低通滤波器。首先利用三维电磁场仿真软件分析了双U形DGS结构的S参数频响特性,然后利用该DGS结构加工制作了DGS结构低通滤波器,实验室测得该滤波器3 dB截止频率为3．26 GHz,通带范围内波纹最大是0．4 dB。插入损耗大于20 dB的阻带宽度为5．2 GHz。