Photodegradation of tetrahalobisphenol-A (X = Cl, Br) flame retardants and delineation of factors affecting the process

The photoassisted degradation (HPLC-UV absorption), dehalogenation (HPLC-IC) and mineralization (TOC decay) of the flame retardants tetrabromobisphenol-A (TBBPA) and tetrachlorobisphenol-A (TCBPA) were examined in UV-irradiated alkaline aqueous TiO₂ dispersions (pH 12), and for comparison the parent bisphenol-A (BPA, an endocrine disruptor) in pH 4–12 aqueous media to assess which factor impact most on the photodegradative process. Complete degradation (2.7–2.8 × 10⁻² min⁻¹) and dehalogenation (1.8 × 10⁻² min⁻¹) of TBBPA and TCBPA occurred within 2 h of UV irradiation, whereas only 45–60% mineralization (2.3–2.7 × 10⁻³ min⁻¹) was complete within 5 h for the flame retardants at pH 12 and ca. 80% for the parent BPA. Factors examined in the pH range 4–12 that impact the degradation of BPA were the point of zero charge of TiO₂ particles (pH_pzc; electrophoretic method), particle or aggregate sizes of TiO₂ (light scattering), and the relative number of OH radicals (as DMPO–OH adducts; ESR spectroscopy) produced in the UV-irradiated dispersion. Dynamics of BPA degradation (2.0–2.4 × 10⁻² min⁻¹) were pH-independent and independent of particle/aggregate size, but did correlate with the number of OH radicals, at least at pHs 4 to 8–9, after which the rates decreased somewhat at pH > 9 with decreasing adsorption owing to Coulombic repulsive forces between the very negative TiO₂ surface and the anionic forms of BPA (pK_as ca. 9.6–11.3), even though the number of OH radicals continued to increase at the higher pHs.     

Formation mechanism for hexagonal-structured self-assemblies of nanocrystalline titania templated by cetyltrimethylammonium bromide

Hexagonal-structured self-assemblies of nanocrystalline (anatase) titania templated by cetyltrimethylammonium bromide (C(16)H(33)N(CH(3))(3)Br; CTAB) (Hex-ncTiO(2)/CTAB Nanoskeleton) were formed after mixing of aqueous solutions containing CTAB spherical micelles and titanium oxysulfate acid hydrate (TiOSO(4).xH(2)SO(4).xH(2)O) as a titania precursor in the absence of any other additives. Formation mechanism of the Hex-ncTiO(2)/CTAB Nanoskeleton was examined in terms of the reaction temperature, titania precursor/CTAB mixing ratio, surfactant type, electrostatic interaction, micelle formation and molecular component. We found that crystal growth of crystalline (anatase) titania (polymorphic crystallization) was promoted with higher temperature and lower titania precursor content in aqueous solutions. In addition, we revealed that the crystalline (anatase) titania was formed in polycation, poly(allylamine hydrochloride ([CH(2)CH(CH(2)NH(2))HCl](n); PAH), and formamide (HCONH(2)) solutions. On the other hand, no titania formation was observed in anionic systems such as sodium dodecyl sulfate (CH(3)(CH(2))(11)OSO(3)Na; SDS) and poly(sodium 4-styrenesulfonate ([C(8)H(7)SO(3)Na](n); PSSS). This indicates that hydrolysis reaction of the titania precursor is initiated by not only cations but also nitrogen atoms in molecules and polymers. Hexagonally structure was formed in only cationic surfactant micellar solutions but not in polycation solutions and formamide.     

Synthesis and application of fluorescein- and biotin-labeled molecular probes for the chemokine receptor CXCR4

The design, synthesis, and bioevaluation of fluorescence- and biotin-labeled CXCR4 antagonists are described. The modification of D-Lys8 at an epsilon-amino group in the peptide antagonist Ac-TZ14011 derived from polyphemusin II had no significant influence on the potent binding of the peptide to the CXCR4 receptor. The application of the labeled peptides in flow cytometry and confocal microscopy studies demonstrated the selectivity of their binding to the CXCR4 receptor, but not to CXCR7, which was recently reported to be another receptor for stromal cell-derived factor 1 (SDF-1)/CXCL12.     

A study on the preparation of supported metal oxide catalysts using JRC-reference catalysts. I. Preparation of a molybdena–alumina catalyst. Part 4. Preparation parameters and impact index

The effects of the volume and pH of the impregnation solution and of the calcination conditions were examined on the physicochemical and catalytic properties of a 13 wt% MoO₃/Al₂O₃ extrudate catalyst. The Al₂O₃ support and drying procedures (static conditions without flowing air) were fixed in the preparations. In the present series of catalysts, the amount of crystalline MoO₃ was marginally small. It was found that the dispersion of Mo oxide species increased as the volume of the impregnation solution increased, gradually approaching a maximum value. The increase in pH (2–8) of the impregnation solution was found to reduce the dispersion of Mo oxide species. The Mo dispersion increased slightly for the impregnation catalysts as the calcination temperature increased (673–873 K), whereas it decreased for the equilibrium adsorption catalysts. The effects of the calcination atmosphere (with or without flowing air, or with flowing humid air) were very small on the dispersion of Mo oxide species under the present preparation conditions. On the other hand, the methanol oxidation activity of MoO₃/Al₂O₃ was sensitive to the preparation parameters examined here. It was demonstrated by means of EPMA and XPS that a considerable migration of Mo took place during the calcination.

In the present study on the preparation of a 13 wt% MoO₃/Al₂O₃ catalyst, an impact index is proposed to measure the magnitude of the effects of the respective parameter(s) on the physicochemical and catalytic properties. With the Mo dispersion, the effects of the preparation parameter decreased in the order, surface area of the support >> drying process > volume of the impregnation solution > pH, calcination temperature and atmosphere. The size of the impact index for the dispersion of Mo sulfide species is 70–75% of that for the Mo oxide species. The HDS activity of the catalyst was less affected by the preparation parameters than the Mo sulfide dispersion. The preparation parameters affected the segregation of Mo on the outer surface of extrudates in a decreasing order: drying process > volume of the impregnation solution > pH, calcination conditions. It was found that the oxidation of methanol was affected most intensely by the drying procedures. The volume of the impregnation solution, calcination conditions and pH of the impregnation solution also strongly affected the oxidation activity. The impact index suggests that the sensitivity to the preparation variables of the physicochemical and catalytic properties of MoO₃/Al₂O₃ decreases in the order, methanol oxidation activity > surface Mo segregation > Mo oxide dispersion > Mo sulfide dispersion > HDS activity.     

Relative reactivity of phenylboronic acid to phenylboronate ion toward L-lactate and mandelate at physiological pH

Kinetic studies were performed on the reactions of phenylboronic acid with L-lactic acid and mandelic acid in acidic aqueous and alkaline solutions in order to specify reactive species in these reactions. It was confirmed that the diprotonated ligand (H₂L: L-lactic acid or mandelic acid) is less reactive than the monoprotonated ligand (HL^?: L-lactate ion or mandelate ion), which made possible direct determination of the rate constants of phenylboronic acid (PhB(OH)₂) and its conjugate base, phenylboronate ion (PhB(OH)₃^?). It was found that PhB(OH)₂ is more reactive than PhB(OH)₃^?. On the basis of kinetic results, it was concluded that the most reactive species are PhB(OH)₂ and HL^? at physiological pH 7.4, so the reaction in the boronic acid-based sensor for L-lactate mainly would occur between these species.     

Detection of Multiple Blockages in Parallelized Microreactors

In a plant consisting of parallelized microreactors (MRs), the product quality is lowered because of a lack of flow uniformity among them when blockage occurs. It is not practical to install sensors in every MR from the viewpoint of cost when detecting the blocked MRs. In the previous study, the multiple blockage detection (MBD) method using a small number of sensors was proposed, but its performance became low when the number of sensors decreased. Here, the conventional algorithm for MBD is improved by considering the process behavior on blockage occurrence, and the effectiveness of the improved algorithm is demonstrated through a numerical case study. The effects of flow distributor types and sensor types on the MBD performance are numerically investigated.     

Novel screening system for protein-protein interactions by bimolecular fluorescence complementation in Saccharomyces cerevisiae

For high-throughput screening of protein-protein interactions, we have developed a novel yeast screening system using Bimolecular fluorescence complementation (BiFC). Two yeast plasmids, in which genes of heterodimerized peptides LZA and LZB were each fused with those of non-fluorescent half fragments of Kusabira-Green mutant (mKG2), were transformed into a- and α-type yeast, respectively. Mating of them gave a library, which was screened by following green fluorescence resulted from LZA-LZB interaction. The method showed potential ability to detect the positive clones from a model library, in which green-fluorescent and non-fluorescent yeast was mixed in a ratio of 1:675.     

Dietary intake of dioxins in Japan in 2016 with time trends since 1998

Total diet samples collected from seven regions throughout Japan in 2016 were analysed for polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like polychlorinated biphenyls (DL-PCBs), known collectively as dioxins. This led to estimates of the latest dietary intake of these contaminants for the general Japanese population (≥1 year old). The average daily intake of dioxins for a person weighing 50 kg, calculated at non-detected congener concentrations assumed to be equal to zero, was estimated to be 0.54 pg TEQ (toxic equivalents) kg^?1 body weight (bw) day^?1. This value is well below the tolerable daily intake of 4 pg TEQ kg^?1 bw day^?1 for dioxins in Japan. The average intake was highest from fish and shellfish, followed by meat and eggs. The TEQ contribution of the fish and shellfish group to the total dietary TEQs was significant (89%). The DL-PCBs accounted for about 67% of the dioxin intake. The latest dioxin intake level was compared with previous estimates from total diet study results obtained annually since 1998 to determine the time trends in the dietary intake of dioxins in Japan. Overall, the average dioxin intake appeared to be decreasing gradually during the period of study. The previous average intakes of dioxins ranged from 0.58 to 1.9 pg TEQ kg^?1 bw day^?1. The latest average intake was the lowest since 1998 and was about one-third of the average intake in 1998. This decreasing trend in the dietary intake of dioxins was mainly influenced by the decreased dioxin intakes from two food groups, fish and shellfish, and meat and eggs.     

Potential of predominant activated sludge bacteria as recipients in conjugative plasmid transfer

We investigated the possibility of conjugative plasmid transfer to the predominant bacteria in activated sludge and the factors influencing the transfer frequency in the activated sludge process. We performed conjugative transfers of a self-transmissible, broad-host-range plasmid RP4 from Escherichia coli C600 to activated sludge bacteria by broth mating. Most of the activated sludge bacteria tested could acquire plasmid RP4, although the transfer frequencies varied from 8.8 x 10(-7) to 1.3 x 10(-2) transconjugants per recipient. The transfer frequencies in several strains were similar to, or higher than, that in intraspecific transfer to E. coli HB101. Matings under various environmental conditions showed that factors relevant to physiological activity, such as temperature and nutrient conditions, seemed to affect the transfer frequency. In addition, conjugative transfer was detected even in filtered raw and treated wastewaters. Thus, the predominant activated sludge bacteria seem to have sufficient potential as recipients in conjugative plasmid transfer under the conditions likely to occur in the activated sludge process. Transfer frequency was reduced by agitation in the presence of suspended solid. This may suggest that conjugative plasmid transfer is physically inhibited in aeration tanks.     

Molecular and Genetic Interactions between CCN2 and CCN3 behind Their Yin–Yang Collaboration

Cellular communication network factor (CCN) 2 and 3 are the members of the CCN family that conduct the harmonized development of a variety of tissues and organs under interaction with multiple biomolecules in the microenvironment. Despite their striking structural similarities, these two members show contrastive molecular functions as well as temporospatial emergence in living tissues. Typically, CCN2 promotes cell growth, whereas CCN3 restrains it. Where CCN2 is produced, CCN3 disappears. Nevertheless, these two proteins collaborate together to execute their mission in a yin–yang fashion. The apparent functional counteractions of CCN2 and CCN3 can be ascribed to their direct molecular interaction and interference over the cofactors that are shared by the two. Recent studies have revealed the mutual negative regulation systems between CCN2 and CCN3. Moreover, the simultaneous and bidirectional regulatory system of CCN2 and CCN3 is also being clarified. It is of particular note that these regulations were found to be closely associated with glycolysis, a fundamental procedure of energy metabolism. Here, the molecular interplay and metabolic gene regulation that enable the yin–yang collaboration of CCN2 and CCN3 typically found in cartilage development/regeneration and fibrosis are described.