Design of a Compact Monopole Antenna for UWB Applications

In this paper, a low cost, highly efficient and low profile monopole antenna for ultra-wideband (UWB) applications is presented. A new inverted triangular-shape structure possessing meander lines is designed to achieve a wideband response and high efficiency. To design the proposed structure, three steps are utilized to achieve an UWB response. The bandwidth of the proposed antenna is improved with changing meander lines parameters, miniaturization of the ground width and optimization of the feeding line. The measured and simulated frequency band ranges from 3.2 to 12 GHz, while the radiation patterns are measured at 4, 5.3, 6 and 8 GHz frequency bands. The overall volume of the proposed antenna is 26 × 25 × 1.6 mm3 ; whereas the FR4 material is used as a substrate with a relative permittivity and loss tangent of 4.3 and 0.025, correspondingly. The peak gain of 4 dB is achieved with a radiation efficiency of 80 to 98% for the entire wideband. Design modelling of proposed antenna is performed in ANSYS HFSS 13 software. A decent consistency between the simulated and measured results is accomplished which shows that the proposed antenna is a potential candidate for the UWB applications.     

Theoretical Investigations of Magnetic Properties and Mechanical Stability of Quaternary Heusler Compounds FeYCrZ (Z = Al,Ga, Ge,and Si): a Spin Gapless Semiconductor

Journal of Superconductivity and Novel Magnetism - In this work, full potential linearized augmented plane wave (FP-LAPW) method is used to determine the electronic, magnetic, and mechanical...     

Simulation of liquid micro-jet in free expanding high-speed co-flowing gas streams

We present the development of an experimentally validated computational fluid dynamics model for liquid micro jets. Such jets are produced by focusing hydrodynamic momentum from a co-flowing sheath of gas on a liquid stream in a nozzle. The numerical model based on laminar two-phase, Newtonian, compressible Navier–Stokes equations is solved with finite volume method, where the phase interface is treated by the volume of fluid approach. A mixture model of the two-phase system is solved in axisymmetry using?~?300,000 finite volumes, while ensuring mesh independence with the finite volumes of the size 0.25 µm in the vicinity of the jet and drops. The numerical model is evaluated by comparing jet diameters and jet lengths obtained experimentally and from scaling analysis. They are not affected by the strong temperature and viscosity changes in the focusing gas while expanding at nozzle outlet. A range of gas and liquid-operating parameters is investigated numerically to understand their influence on the jet performance. The study is performed for gas and liquid Reynolds numbers in the range 17–1222 and 110–215, and Weber numbers in the range 3–320, respectively. A reasonably good agreement between experimental and scaling results is found for the range of operating parameters never tackled before. This study provides a basis for further computational designs as well as adjustments of the operating conditions for specific liquids and gases.     

3D Printed Enzyme-Functionalized Scaffold Facilitates Diabetic Bone Regeneration

Patients with diabetes mellitus (DM) suffer from a high risk of fractures and poor bone healing ability. Surprisingly, no effective therapy is available to treat diabetic bone defect in clinic. Here, a 3D printed enzyme-functionalized scaffold with multiple bioactivities including osteogenesis, angiogenesis, and anti-inflammation in diabetic conditions is proposed. The as-prepared multifunctional scaffold is constituted with alginate, glucose oxidase (GOx), and catalase-assisted biomineralized calcium phosphate nanosheets (CaP@CAT NSs). The GOx inside scaffolds can alleviate the hyperglycemia environment by catalyzing glucose and oxygen into gluconic acid and hydrogen peroxide (H₂O₂). Both the generated H₂O₂ as well as the overproduced H₂O₂ in DM can be scavenged by CaP@CAT NSs, while the initiated hypoxic microenvironment stimulates neovascularization. Moreover, the incorporation of CaP@CAT NSs not only enhance the mechanical property of the scaffolds, but also facilitate bone regeneration by the degraded Ca²⁺ and PO₄³⁻ ions. The remarkable in vitro and in vivo outcomes demonstrate that enzymes functionalized scaffolds can be an effective strategy for enhancing bone tissue regeneration in diabetic conditions, underpinning the potential of multifunctional scaffolds for diabetic bone regeneration.     

BDN-GWMNN: Internet of Things (IoT) Enabled Secure Smart City Applications

Nowadays, next-generation networks such as the Internet of Things (IoT) and 6G are played a vital role in providing an intelligent environment. The development of technologies helps to create smart city applications like the healthcare system, smart industry, and smart water plan, etc. Any user accesses the developed applications; at the time, security, privacy, and confidentiality arechallenging to manage. So, this paper introduces the blockchain-defined networks with a grey wolf optimized modular neural network approach for managing the smart environment security. During this process, construction, translation, and application layers are created, in which user authenticated based blocks are designed to handle the security and privacy property. Then the optimized neural network is applied to maintain the latency and computational resource utilization in IoT enabled smart applications. Then the efficiency of the system is evaluated using simulation results, in which system ensures low latency, high security (99.12%) compared to the multi-layer perceptron, and deep learning networks.

     

Novel Cost Efficient Resource Allocation Technique Based on Deadline and Budget Constraints for Edge Users

Wireless Personal Communications - The edge computing paradigm has experienced quick development in recent years. This paradigm is featured by pushing the storage and computational resources closer...     

States of Sulfur in Alkali Borate Glasses

Simple binary alkali borate glasses of differing alkali content (alkali = Li, Na, or K) containing sulfur were prepared and their absorption spectra were measured in the range of 200 to 700 nm. The absorption bands obtained were used to determine the stable states of sulfur in these glasses by directly comparing them with published data. The following states of sulfur were identified and their ranges of stability were determined: the S₂ molecule in glasses containing at least 15 mol% alkali oxide, the S₃⁻ and S₂⁻ in glasses containing 20 to 30 mol% Na₂O or K₂O, and the polysulfide ion (S x ²⁻) in glasses of 30 to 35 mol% Na₂O or K₂O.     

Synthesis and characterization of functionalized MWCNTs/PMMA composites: device fabrication for RH sensing

ABSTRACT

Functionalization of multiwalled carbon nanotubes (MWCNTs) with amine group using 4,4′-diaminodiphenyl sulfone (DDS) is achieved after carboxylation of pure MWCNTs (p-MWCNTs). p-MWCNTs, a-MWCNTs (acid functional MWCNTs) and f-MWCNTs (amine functional MWCNTs) were used to fabricate their nanocomposite with PMMA. A comparative study of the humidity characteristics of p-MWCNTs/PMMA, a-MWCNTs/PMMA and f-MWCNTs/PMMA-based capacitive humidity sensors was carried. f-MWCNTs/PMMA-based capacitive humidity sensor shows low hysteresis loss (5%), good response recovery behavior and highest sensitivity (S ~ 9736%) among all the studied composites. The maximum capacitance drift under different relative humidity was 1%RH.     

Electromechanical properties of ternary BiFeO<Subscript>3</Subscript>−0.35BaTiO<Subscript>3</Subscript>–BiGaO<Subscript>3</Subscript> piezoelectric ceramics

In the present work, composition dependent crystal structure, ferroelectric, piezoelectric, and temperature dependent dielectric properties of the BiGaO₃-modified (1–x)(0.65Bi_1.05FeO₃–0.35BaTiO₃) (BFBT35–xBG, where x?=?0.00–0.03) lead-free ceramics were systematically investigated by solid-state reaction method, followed by water quenching process. The substitution of BG successfully diffuses into the lattice of the BFBT ceramics, without changing the pseudo-cubic structure of the samples. The scanning electron microscopy (SEM) results revealed that the average grain size was increased with BG-content in BFBT system. The BFBT–xBG ceramics showed a maximum in permittivity (?_max) at temperatures (T_max) above 500 °C in the compositional range of 0.00?≤?x?≤?0.03. The electro-strain is measured to be 0.125% (d^*₃₃ ~ 250 pm/V) under unipolar fields (5 kV/mm) for BFBT–0.01BG ceramics. The same composition (x?=?0.01), large static piezoelectric constant (d₃₃ ~ 165 pC/N) and electromechanical coupling factor (k_p ~ 25%) were obtained. The above investigated characterizations suggests that BFBT–BG material is favorable for piezoelectric and high temperature applications.