Oxidation and reforming reactions of CH4 on a stepped Pt(5 5 7) single crystal

The oxidation and reforming kinetics of methane by O₂, CO₂ and H₂O were studied on a stepped Pt(5 5 7) single crystal from 623 to 1050 K under methane rich conditions. The rate of carbon deposition was followed by ex-situ Auger electron spectroscopy under non-oxidative conditions. The apparent activation energy for methane decomposition was significantly lower than the apparent barriers measured for both total oxidation, CO₂ and H₂O reforming. Total oxidation of methane to CO₂ and H₂O followed by combined dry and steam reforming (combined combustion-reforming) led to CO production rates which were higher than direct CO₂ or H₂O reforming rates. The enhanced rates are most likely due to the ability of adsorbed oxygen to prevent carbon nucleation and/or scavenge carbon enabling the reforming reaction to turnover on a larger fraction of sites. Comparable amounts of carbon were found by Auger electron spectroscopy measurements after both direct dry or steam reforming, while combined oxidation-reforming had considerable less carbon. During direct dry or steam reforming, CO₂ and H₂O serve only to scavenge adsorbed atomic carbon, while in the presence of oxygen, carbon is removed by both combustion and reforming routes.     

Creep and Stress Rupture Behavior of an Advanced Silicon Nitride: Part I, Experimental Observations

Cylindrical buttuohead specimens of an advanced silicon nitride were tested in uniaxial tension at temperatures between 1422 and 1673 K. In the range 1477 to 1673 K, creep deformation was reliably measured using high-temperature contact probe extensometry. Extensive scanning and transmission electron microscopy has revealed the formation of lenticular cavities at two-grain junctions at all temperatures (1422–1673 K) and extensive triple-junction cavitation occurring at the higher temperatures (1644–1673 K). Cavitation is believed to be part of the net creep process. The stress rupture data show stratification of the Monkman–Grant lines with respect to temperature. Failure strain increased with increase in rupture time or temperature, or decrease in stress. Fractography showed that final failure occurred by subcritical crack growth in all specimens.     

Removal of fatty soil from glass by surfactants and surfactant-builder compositions

Previous papers have reported radiotagged fatty soil removal from glass either by solvents or by aqueous solutions of sodium tripolyphosphate and other builders. This paper provies soil-removal data for aqueous systems of both pure and built surfactant compositions of the nonionic and alkylbenzene sulfonate types. In general, nonionics are the most effective detergents for the system fatty soil/glass; the 10-mole ethylene oxide adduct products show peak soil-removal. Nonionic surfactants appear most effective for soil removal when used in baths closely approaching their cloud-points. Though modification of hydrophobe by EO addition can affect cloud point, peak soil-removal effectiveness seems to be controlled by hydrophobe selection. Highest soil removal for the alkylbenzene series occurred with the longer alkyl chain (pentadecyl). Admixture of surfactant and sodium tripolyphosphate provided synergistic compositions with certain 10-EO surfactants. Building of anionics markedly improved soil removal over the pure material but seldom exceeded the removal by STP alone. Presented at 34th fall meeting, American Oil Chemists' Society, New York, October 17–19, 1960.     

Viscoelastic flow in an obstructed microchannel at high Weissenberg number

Detailed measurements of the flow instability of dilute shear-thinning viscoelastic aqueous solutions, with relatively low zero-shear viscosities, in an obstructed microchannel flow are reported. We examine the flow behaviour resulting from a 100 μm post placed in the channel centreline over a range of Reynolds numbers (\(5<Re<300\)) and Weissenberg numbers (\(20<Wi<10^3\)). Micro-particle image velocimetry measurements show the onset of an upstream instability within a Reynolds number range and at a critical elasticity number corresponding to polymer concentrations above 25 ppm of long-chain polyacrylamide. The instability results in significant local fluctuations in the flow field approaching 30 % of the mean velocity. The magnitude of the local viscosity ratio in the region upstream of the post is proposed as a driving mechanism for the instability which resembles a buckling flow. Additionally, the classical instability owing to separation and vortex formation downstream of the post in Newtonian flow is suppressed and a very long stable wake is observed extending over 10 post-diameters downstream.     

Subroutine based detection of APT malware

Statistical detection of mass malware has been shown to be highly successful. However, this type of malware is less interesting to cyber security officers of larger organizations, who are more concerned with detecting malware indicative of a targeted attack. Here we investigate the potential of statistically based approaches to detect such malware using a malware family associated with a large number of targeted network intrusions. Our approach is complementary to the bulk of statistical based malware classifiers, which are typically based on measures of overall similarity between executable files. One problem with this approach is that a malicious executable that shares some, but limited, functionality with known malware is likely to be misclassified as benign. Here a new approach to malware classification is introduced that classifies programs based on their similarity with known malware subroutines. It is illustrated that malware and benign programs can share a substantial amount of code, implying that classification should be based on malicious subroutines that occur infrequently, or not at all in benign programs. Various approaches to accomplishing this task are investigated, and a particularly simple approach appears the most effective. This approach simply computes the fraction of subroutines of a program that are similar to malware subroutines whose likes have not been found in a larger benign set. If this fraction exceeds around 1.5 %, the corresponding program can be classified as malicious at a 1 in 1000 false alarm rate. It is further shown that combining a local and overall similarity based approach can lead to considerably better prediction due to the relatively low correlation of their predictions.     

A logarithmic complexity divide-and-conquer algorithm for multi-flexible-body dynamics including large deformations

A new algorithm is presented for the modeling and simulation of multi-flexible-body systems. This algorithm is built upon a divide-and-conquer-based multibody dynamics framework, and it is capable of handling arbitrary large rotations and deformations in articulated flexible bodies. As such, this work extends the current capabilities of the flexible divide-and-conquer algorithm (Mukherjee and Anderson in Comput. Nonlinear Dyn. 2(1):10–21, 2007), which is limited to the use of assumed modes in a floating frame of reference configuration. The present algorithm utilizes the existing finite element modeling techniques to construct the equations of motion at the element level, as well as at the body level. It is demonstrated that these equations can be assembled and solved using a divide-and-conquer type methodology. In this respect, the new algorithm is applied using the absolute nodal coordinate formulation (ANCF) (Shabana, 1996). The ANCF is selected because of its straightforward implementation and effectiveness in modeling large deformations. It is demonstrated that the present algorithm provides an efficient and robust method for modeling multi-flexible-body systems that employ highly deformable bodies. The new algorithm is tested using three example systems employing deformable bodies in two and three spatial dimensions. The current examples are limited to the ANCF line or cable elements, but the approach may be extended to higher order elements. In its basic form, the divide-and-conquer algorithm is time and processor optimal, yielding logarithmic complexity O(log(N _b )) when implemented using O(N _b ) processors, where N _b is the number of bodies in the system.     

E-ARK: Harmony of Social/Cultural Records Across Europe

E-ARK (European Archiving of Records and Knowledge Preservation) is currently introducing standardization, new tools, and infrastructure into pan-European digital archival systems. The results of this pilot project can be applied to higher education where research data centers are required to preserve data for re-use in accordance with new open policies.

We elucidate how the E-ARK best practice survey has informed the development of new information packages for ingest, preservation, and re-use, and show how these can be applied to the Arts, Humanities, and Social Sciences with practical exemplars such as census data.     

Archival Appraisal and the Digital Record: Applying Past Tradition for Future Practice

The digital revolution has changed the daily work of archivists. As a result, archivists have refined their analog practices and initiated new ones to accommodate the unique information creation and access needs of users. While limitless storage and technological obsolescence may be surmountable challenges, appraisal continues to be a necessary component of this preservation enterprise. Macro-appraisal—a top-down functional assessment of an organization’s high-level decision making that defines the enduring value of specific bodies of documentary evidence of these creative or administrative processes—is used to facilitate the management of diverse bodies of born-digital records in archives and special collections.     

Safe Autonomous Agent Formation Operations Via Obstacle Collision Avoidance

In this paper, we consider the problem of flocking and shape‐orientation control of multi‐agent systems with inter‐agent and obstacle collision avoidance. We first consider the problem of forcing a set of autonomous agents to form a desired formation shape and orientation while avoiding inter‐agent collision and collision with convex obstacles, and following a trajectory known to only one of the agents, namely the leader of the formation. Then we build upon the solution given to this problem and solve the problem of guaranteeing obstacle collision avoidance by changing the size and the orientation of the formation. Changing the size and the orientation of the formation is helpful when the agents want to go through a narrow passage while the existing size or orientation of the formation does not allow this. We also propose collision avoidance algorithms that temporarily change the shape of the formation to avoid collision with stationary or moving nonconvex obstacles. Simulation results are presented to show the performance of the proposed control laws.     

An extended divide-and-conquer algorithm for a generalized class of multibody constraints

An extension to the divide-and-conquer algorithm (DCA) is presented in this paper to model constrained multibody systems. The constraints of interest are those applied to the system due to the inverse dynamics or control laws rather than the kinematically closed loops which have been studied in the literature. These imposed constraints are often expressed in terms of the generalized coordinates and speeds. A set of unknown generalized constraint forces must be considered in the equations of motion to enforce these algebraic constraints. In this paper dynamics of this class of multibody constrained systems is formulated using a Generalized-DCA. In this scheme, introducing dynamically equivalent forcing systems, each generalized constraint force is replaced by its dynamically equivalent spatial constraint force applied from the appropriate parent body to the associated child body at the connecting joint without violating the dynamics of the original system. The handle equations of motion are then formulated considering these dynamically equivalent spatial constraint forces. These equations in the GDCA scheme are used in the assembly and disassembly processes to solve for the states of the system, as well as the generalized constraint forces and/or Lagrange multipliers.