Die quenching limit of AA2024 aluminum alloy billet on servo press

Die quenching of AA2024 aluminum alloy billets was carried out on a servo press with ram-motion control of WC-20 mass%Co dies directly after solution heat treatment (SHT). To clarify the dependence on billet size for die quenching, two billets with a height of h₀ = 8 mm or 16 mm and with the same diameter of 16 mm were prepared. The cylindrical billets were heated in an electric furnace at 823 K and transferred to the press. Then the billets were uniaxially compressed with a reduction in height (Δh/h₀) of 2% or 5%, and further held between the dies. The sandwiching duration by dies (t_d.q.) was varied from 0 to 8 s. Based a measured temperature change, hardness and TG–DTA analysis, it is found that die quenching is successfully carried out without precipitation hardening only in the case of the billet with a height of 8 mm and t_d.q. > 6 s. The reduction in height is limited less than 5% by intergranular fracture on side surface of billet during the die quenching process.     

Preparation and mesostructure control of highly ordered zirconia particles having crystalline walls

Mesostructured zirconia particles having monoclinic-type crystalline walls were prepared using a low-temperature crystallization technique. Crystalline zirconia particles with highly-ordered mesostructures were obtained through the sol–gel process of zirconium sulfate tetrahydrate at 333 K in the presence of molecular self-assemblies of cetyltrimethylammonium bromide (CTAB) or mixtures of CTAB and anionic molecules such as sodium dodecyl sulfate and sodium p-toluenesulfonate. Variations in the molar ratios of CTAB and the chemical species of anionic molecules led to the variations in the periods of highly-ordered zirconia having crystalline walls. Calcination of the mesostructured zirconia particles prepared using templates consisting solely of CTAB yielded crystalline mesoporous zirconia particles.     

Cationic polymerization behavior of β‐methylglycidyl ether derivatives and physical properties of their cationically cured materials

β‐Methylglycidyl ethers have been applied to Electrical and Electronic adhesives. However, there is no report about the detailed polymerization behavior and physical properties of their cured products. Hence, we investigated cationic polymerization behavior of bisphenol A di(β‐methylglycidyl) ether (Me‐BADGE) and physical properties of the cured products containing Me‐BADGE. DSC analysis suggested that Me‐BADGE could be cured completely at lower temperature than bisphenol A diglycidyl ether (BADGE). Physical properties were analyzed by dynamic viscoelastic analysis. Glass transition temperature (T_g) of BADGE homopolymer was 194°C. In contrast, the copolymer of BADGE (50 wt %) with Me‐BADGE (50 wt %) showed T_g at 124°C. According to the data of E’ and tan δ, crosslink density of the cured products decreased with increasing the Me‐BADGE content. The analysis of cationic polymerization of monofunctional β‐methylglycidyl ether suggested that the cationic polymerization proceeded not only through oxonium cation but also through carbocation formed by ring‐opening reaction of oxonium cation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42377.     

Cerebral Hyperperfusion after Revascularization Inhibits Development of Cerebral Ischemic Lesions Due to Artery-to-Artery Emboli during Carotid Exposure in Endarterectomy for Patients with Preoperative Cerebral Hemodynamic Insufficiency: Revisiting the “Impaired Clearance of Emboli” Concept

The purpose of the present study was to determine whether cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during exposure of the carotid arteries in carotid endarterectomy (CEA). In patients undergoing CEA for internal carotid artery stenosis (≥70%), cerebral blood flow (CBF) was measured using single-photon emission computed tomography (SPECT) before and immediately after CEA. Microembolic signals (MES) were identified using transcranial Doppler during carotid exposure. Diffusion-weighted magnetic resonance imaging (DWI) was performed within 24 h after surgery. Of 32 patients with a combination of reduced cerebrovascular reactivity to acetazolamide on preoperative brain perfusion SPECT and MES during carotid exposure, 14 (44%) showed cerebral hyperperfusion (defined as postoperative CBF increase ≥100% compared with preoperative values), and 16 (50%) developed DWI-characterized postoperative cerebral ischemic lesions. Postoperative cerebral hyperperfusion was significantly associated with the absence of DWI-characterized postoperative cerebral ischemic lesions (95% confidence interval, 0.001–0.179; p = 0.0009). These data suggest that cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during carotid exposure in CEA, supporting the “impaired clearance of emboli” concept. Blood pressure elevation following carotid declamping would be effective when embolism not accompanied by cerebral hyperperfusion occurs during CEA.     

Main‐chain smectic liquid crystalline polymer exhibiting unusually high thermal conductivity in an isotropic composite

The thermal conductivity (TC) of an isotropic composite comprising of a main‐chain smectic liquid crystalline PB‐10 polyester and 50‐μm‐sized roughly spherical magnesium oxide (MgO) particles is investigated. The increase in the composite TC with higher MgO fractions is steeper than that expected by Bruggeman's theory for the TC of a polydomain PB‐10 polyester (0.52 W m^?1 K^?1). When the filler content is larger than 30 vol %, the composite TC approaches a value that can be explained only if the polyester functions as a matrix with 1.0 W m^?1 K^?1, which is five times as high as those of isotropic common polymers (0.2 W m^?1 K^?1). Such an unusually high TC for a polymer matrix is attributed to some polymer lamellae that lie parallel to the particle surface and are stacked toward neighboring particles, thus creating effective heat paths between the particles and a continuous thermal network in a composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39896.     

Synthesis and chemical properties of polyethyleneimines crosslinked by penta-2,4-dienylideneammonium unit

The reaction of N-(2,4-dinitrophenyl)pyridinium anion ( salt(A) ; A = Cl⁻, FeCl₄⁻, and (CN)₂N⁻) with linear polyethyleneimine (LPEI; M_n = 20 380) and branched polyethyleneimines (BPEI1; M_n = 600, BPEI2; M_n = 10 000) at various molar feed ratios without using a catalyst resulted in pyridinium ring opening to yield ionic LPEI and BPEIs that were crosslinked by conjugated penta-2,4-dienylideneammonium (PDA) units, LPEI-PDA , BPEI1-PDA , and BPEI2-PDA , respectively. A model compound was synthesized by the reaction of salt(Cl) with diethylamine. The solubilities of BPEI1-PDA and BPEI2-PDA depended on the feed ratios between salt(Cl) and BPEI1 or BPEI2. Dipping LPEI-PDA into water and methanol yielded hydro- and organogels, respectively. UV–vis and reflection measurements revealed an expanded π-conjugation length between the polymer chains due to the through-space orbital interaction of the electrons on the two nitrogen atoms at the crosslinked positions in LPEI-PDA , BPEI1-PDA , and BPEI2-PDA . Cyclic voltammetry analysis suggested that the polymers underwent electrochemical oxidation. Measurement using a superconducting quantum interference device (SQUID) indicated that LPEI-PDA having FeCl₄⁻ anions was paramagnetic. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48712.     

Burning Rate Augmentation of BAMO Based Propellants

Thermal decomposition and the burning properties of BAMO based propellants with HMX or AN/HMX have been investigated. The heat generated by the azide binder decomposition initiated and accelerated the thermal decomposition of HMX and AN. Ammonium perchlorate (AP) and lead stearate with carbon black significantly altered the mechanisms of the thermal decomposition and the burning properties of the HMX based propellants. AP showed an increase in burning rate with a slight decrease in burning rate pressure exponent. The lead catalyst yielded high value of the burning rate with the lowest pressure exponent. The ammonium dichromate also influenced the mechanisms of the thermal decomposition and the burning properties of the AN/HMX samples. The combination of ammonium dichromate and copper chromite was the most effective on the burning rate augmentation of AN/HMX based propellants. AN sublimed and evaporated from the condensed phase and mainly reacted exothermically in the gas phase HMX and AN/HMX based propellants showed smokeless burning characteristics in the small rocket motor combustion tests.     

Hypotensive effect of a sweetpotato protein digest in spontaneously hypertensive rats and purification of angiotensin I-converting enzyme inhibitory peptides

We have investigated angiotensin I-converting enzyme (ACE) inhibitory activity in an enzyme digest of sweetpotato protein, the antihypertensive effect of the digest in spontaneously hypertensive rats (SHR), and the identification of an ACE inhibitory peptide. Protein was prepared from squeezed juice of sweetpotato by isoelectric focusing precipitation. Three kinds of proteases were selected for effective protein digestion. The digest, sweetpotato peptide (SPP), exhibited strong ACE inhibitory activity (IC₅₀: 18.2 μg/ml). SPP was orally administered by gavage to SHR at a dose of 100 mg/kg or 500 mg/kg. The systolic blood pressure and the diastolic blood pressure were measured at 0 (before administration), 2, 4, 8, and 24 h after administration. A dose-dependent decrease in systolic blood pressure in SHR was observed after oral administration of SPP. Significant differences between SPP-administered rats and control rats were observed 4 and 8 h after administration in the 500 mg/kg-administered group and 8 h after administration in the 100 mg/kg-administered group. Diastolic blood pressure also decreased in the SPP-administered groups, although the difference between SPP-administered rats and control rats was not significant. These results suggest that SPP may be useful in the prevention or treatment of hypertension. Peptides with ACE inhibitory activity were purified from SPP by absorption chromatography and preparative HPLC using an ODS column. The amino acid sequences of isolated peptides were I-T-P, I-I-P, G-Q-Y and S-T-Y-Q-T; their ACE inhibitory activities (IC₅₀) were 9.5 μM, 80.8 μM, 52.3 μM and 300.4 μM, respectively. In conclusion, I-T-P is a novel, strong ACE inhibitory peptide.     

Sterol composition of 19 vegetable oils

The unsaponifiables from 19 vegetable oils were divided into a sterol and three other fractions by thin-layer chromatography. All except olive and palm kernel oils gave the sterol fraction in a large quantity. Compositions of the sterol fractions were determined by gas liquid chromatography. Identification of each sterol was carried out by gas liquid chromatography and combined gas chromatograph-mass spectrometry. Campesterol, stigmasterol and β-sitosterol were present in all oils, and a minor amount of cholesterol in majority of the oils. Brassicasterol occurrence was widespread but its content was extremely small in oils other than rapeseed oil. Other sterols, presumably δ⁷-stigmastenol and δ⁵- and δ⁷-avenasterol were detected in most of the oils.     

Sterols,methylsterols, and triterpene alcohols in threeTheaceae and some other vegetable oils

The unsaponifiables from threeTheaceae (Camellia japonica L.,Camellia Sasanqua Thunb., andThea sinensis L.) oils and alfalfa, garden balsam, and spinach seed oils and shea fat were separated into four fractions: sterols, 4-methylsterols, triterpene alcohols, and less polar compounds by thin layer chromatography. While the sterol fraction was the major one for the unsaponifiables from alfalfa and spinach seed oils, the triterpene alcohol fraction was predominant for the unsaponifiables from all other oils. The sterol, 4-methylsterol, and triterpene alcohol fractions were analyzed by gas chromatography. All the sterol fractions were alike in their compositions, consisting exclusively of Δ⁷-sterols, such as α-spinasterol and Δ⁷-stigmastenol as predominant components together with Δ⁷-avenasterol and 24-methylcholest-7-enol. Obtusifoliol, gramisterol (occasionally accompanied with cycloeucalenol), and citrostadienol, together with several other unidentified components, were found in the 4-methylsterol fractions from all of the oils except shea fat. The 4-methylsterol fraction from shea fat showed a characteristic composition containing a large proportion of unidentified components which had relative retention time greater than that of citrostadienol, while no citrostadienol was detected. β-Amyrin, lupeol, and butyospermol were major components of the triterpene alcohol fractions from most of the oils, but the fraction from spinach seed oil contained cycloartenol and 24-methylene-cycloartanol as predominant components. There is a close similarity in the compositions of unsaponifiables (sterols, 4-methylsterols, and triterpene alcohols) of the threeTheaceae oils. Two sterols, α-spinasterol and Δ⁷-stigmastenol, and five triterpene alcohols were isolated from tea seed oil. Moreover, five unidentified components beside parkeol, butyrospermol, α-amyrin, and lupeol were isolated from the triterpene alcohol fraction of shea fat.