Study on Pb-Bi natural circulation phenomena

For the development of 45w%Pb-55w%Bi cooled direct contact boiling water small fast reactor (PBWFR), experimental study on Pb-Bi-water direct contact boiling two-phase flow has been performed using Pb-Bi-water direct contact boiling two-phase flow loop. For stable start-up of the boiling flow operation, Pb-Bi single-phase natural circulation must be realized in a Pb-Bi flow system of the loop before water injection into Pb-Bi. The Pb-Bi flow system consists of a four-heater-pin bundle, a chimney, an upper plenum, a level meter tank, a cooler, and an electromagnetic flow meter. A stable Pb-Bi single-phase natural circulation was realized in the range of flow rate from 1.5 l/min to 4.8 l/min by heating Pb-Bi in the heater-pin bundle with a power up to 7.7 kW. The inlet and outlet temperatures of the heater bundle were in the ranges from 243°C to 278°C, and from 251°C to 278°C, respectively. The natural circulation flow was simulated analytically using one-dimensional flow model including frictional, form and drag forces. Total hydraulic head through the loop were calculated from Pb-Bi densities at measured Pb-Bi temperatures in the loop. It was found that the calculated flow rate agreed well with the measured ones, which indicated the validity of the analytical models.     

Comparative study of (Ba,Sr)TiO3 films prepared by electron cyclotron resonance plasma sputtering and metal-organic decomposition

(Ba,Sr)TiO₃ films were prepared on Pt/Ti/SiO₂/Si substrates by mirror-confinement-type electron cyclotron resonance (ECR) plasma sputtering as well as by metal-organic decomposition (MOD). The films prepared by ECR plasma sputtering were crystallized at lower temperatures with better crystallinity and a denser structure than those by MOD. As for dielectric constant, films prepared by ECR plasma sputtering exhibited a relatively high value over 500 at a low annealing temperature of 873 K, whereas films by MOD exhibited approximately 350. This is attributed to the better crystallinity and the denser structure of the films by ECR plasma sputtering. The leakage current density of the films was found to be similar in both processes.     

Linear bipolar OTAs employing exponential‐law circuits

This paper presents design of linear bipolar OTAs, which are composed of two function blocks; one is an exponential‐law circuit and the other is a core cell. Multi‐tanh cells are employed as the core cell. This kind of OTA has lower power dissipation relatively to the conventional multi‐tanh cell. According as the order of the multi‐tanh core cell becomes higher, the number of circuit realization for the core cell increases. For example, we have two OTAs for the core circuit of an emitter‐coupled pair and four OTAs for the doublet core cell. Thus, we consider the generalized OTAs for an arbitrary order n of the core cell and obtain a formula to give the realization number of the linear OTAs for n. According to the formula, there must be eight OTAs in the case of n=3. All of the eight OTAs are examined. Analysis and simulation results show that the OTAs have advantage in their characteristics, such as linear input range, power dissipation, noise, and frequency response. Copyright 2004 John Wiley & Sons, Ltd.     

Meshless analysis of potential problems in three dimensions with the hybrid boundary node method

Combining a modified functional with the moving least‐squares (MLS) approximation, the hybrid boundary node method (Hybrid BNM) is a truly meshless, boundary‐only method. The method may have advantages from the meshless local boundary integral equation (MLBIE) method and also the boundary node method (BNM). In fact, the Hybrid BNN requires only the discrete nodes located on the surface of the domain. The Hybrid BNM has been applied to solve 2D potential problems. In this paper, the Hybrid BNM is extended to solve potential problems in three dimensions. Formulations of the Hybrid BNM for 3D potential problems and the MLS approximation on a generic surface are developed. A general computer code of the Hybrid BNM is implemented in C++. The main drawback of the ‘boundary layer effect’ in the Hybrid BNM in the 2D case is circumvented by an adaptive face integration scheme. The parameters that influence the performance of this method are studied through three different geometries and known analytical fields. Numerical results for the solution of the 3D Laplace's equation show that high convergence rates with mesh refinement and high accuracy are achievable. Copyright © 2004 John Wiley & Sons, Ltd.     

Lymphatic networks in the periodontal tissue and dental pulp as revealed by histochemical study.

The structural organization and fine distribution of the lymphatic networks in the periodontal tissues (gingiva, periodontal membrane, and alveolar process) and dental pulp of animals and humans were reviewed with special reference to histochemical examination by light and electron microscopy. The distinction between lymphatics and blood vessels was made on cryostat sections of undecalcified and calcified teeth treated with EDTA solution and whole mount preparations of periodontal membranes using 5'-nucleotidase (5'-Nase)-alkaline phosphatase (ALPase) double staining. This staining procedure allowed lymphatic vessels in the periodontal tissue and dental pulp to be differentiated from blood vessels. The specificity and localization of the enzyme reactions were confirmed by comparative histochemical studies of the same specimen with light microscopy and scanning or transmission electron microscopy. Well-developed 5'-Nase-positive lymphatic networks were observed on the tissue sections and whole mount preparations of the gingiva, periodontium, and dental pulp. More lymphatic vessels were seen in the root area of the periodontium than in the cervical area. In the dental pulp, lymphatic vessels were more numerous in the central part than in the peripheral odontoblastic layer. These distributions of the lymphatic capillary networks are discussed in relation to their ability to supply lymph to the teeth.     

X-ray CCD calibration system using fluorescent lines

We have developed a CCD calibration system using fluorescent X-ray lines with energies ranging from 1.49 keV (Al K) to 11.2 keV (Se K). The absolute X-ray flux is calibrated by a gas proportional counter, while the emerging spectra are monitored by solid-state silicon detectors. In order to suppress contaminating X-rays in the fluorescence spectra, mechanical collimators were set in the X-ray beam line, high-purity targets for fluorescent lines were used, and band-pass filters were put on the X-ray beam line. As for the purity of the fluorescent X-rays, the typical purity achieved was 98%.     

A Knowledge-Based Software Process Simulation Model

In this paper we propose a new software development process simulation model. The model can predict variations of productivity based on dynamic changes in the developer's knowledge structure. An important concept of the model is that a developer's productivity is influenced by the developer's knowledge. Moreover, a developer can acquire new knowledge by executing activities of a project. In other words, the developer's knowledge structure changes during the project. The knowledge structure is defined using a cognitive map that consists of knowledge elements and prerequisite relationships among the knowledge elements. By adding the specific developer's knowledge and the specific project workload to the knowledge structure, an increment of the developer's knowledge and the project progress are calculated into the model. The simulation results are useful for making project plans including technical reviews, which are an efficient technique for acquiring new knowledge. The simulation model can predict what knowledge should be discussed in the technical review, when the review should be held, and who the members of the review should be. The simulation results help managers make the most appropriate and executable project plan.     

Uterine Deletion of Bmal1 Impairs Placental Vascularization and Induces Intrauterine Fetal Death in Mice

Recently, it was demonstrated that the expression of BMAL1 was decreased in the endometrium of women suffering from recurrent spontaneous abortion. To investigate the pathological roles of uterine clock genes during pregnancy, we produced conditional deletion of uterine Bmal1 (cKO) mice and found that cKO mice could receive embryo implantation but not sustain pregnancy. Gene ontology analysis of microarray suggested that uterine NK (uNK) cell function was suppressed in cKO mice. Histological examination revealed the poor formation of maternal vascular spaces in the placenta. In contrast to WT mice, uNK cells in the spongiotrophoblast layer, where maternal uNK cells are directly in contact with fetal trophoblast, hardly expressed an immunosuppressive NK marker, CD161, in cKO mice. By progesterone supplementation, pregnancy could be sustained until the end of pregnancy in some cKO mice. Although this treatment did not improve the structural abnormalities of the placenta, it recruited CD161-positive NK cells into the spongiotrophoblast layer in cKO mice. These findings indicate that the uterine clock system may be critical for pregnancy maintenance after embryo implantation.