Preparation and evaluation of a novel wound dressing sheet comprised of β-glucan–chitosan complex

A transparent wound dressing sheet was obtained by forming a complex between β-glucan and chitosan (CS). These materials were chosen for their biocompatible, bioabsorbable, and biodegradable properties, and they were expected to promote the therapeutic efficacy of the dressing by increasing the wound healing response. The therapeutic efficacy of the β-glucan–CS complex sheet as a wound dressing was evaluated in wounds created on the dorsal surfaces of mice. β-glucan–CS complex sheets demonstrated therapeutic efficacies comparable or superior to that of Beschitin®W, a commercial wound dressing made from CS. Additionally, the β-glucan–CS complex sheet did not dissolve during the application period, did not adhere to wounds, and was easy to remove. Cumulatively, these results indicate that β-glucan–CS complex sheets are a promising new wound dressing product.     

Formate dehydrogenase gene of Arabidopsis thaliana is induced by formaldehyde and not by formic acid

Variability of expression of formate dehydrogenase (FDH) caused by uptake of C-1 compounds was examined by using Arabidopsis thaliana as a model plant. Effects of uptake of several C-1 compounds were evaluated by Northern blot analysis using cDNA of A. thaliana FDH prepared by cloning on the basis of known sequence. As a result, expression of the FDH gene in A. thaliana was not intensely influenced by formic acid, an inherent substrate for FDH, but strongly induced by its reduced form, formaldehyde.     

Catalytic graphitization of an amorphous carbon film under focused electron beam irradiation due to the presence of sputtered nickel metal particles

Electron beam irradiation of Ni particles (diameter: ∼500 nm) in a transmission electron microscope (TEM) formed small secondary particles, which moved randomly on an amorphous carbon film. Catalytic graphitization occurred along the path traced by the moving particles. It is generally well known that heat treatment is needed to produce catalytic graphitization of an amorphous carbon. However, we rapidly produced catalytic graphitization in the presence of sputtered Ni particles by focused electron beam irradiation in the TEM although no external heating was employed.     

Site and sample dependent electron-phonon coupling of Eu ions in epitaxial-grown GaN layers

The incorporation of Eu ions into GaN has been studied using combined excitation-emission spectroscopy for samples that were in situ doped during organometallic vapor-phase epitaxy (OMVPE) growth. The obtained fingerprints of characteristic emission spectra are subsequently used to determine the coupling of the Eu ions to the crystal lattice. We find a majority site, which exhibits coupling to bulk-like phonon modes as well as a localized phonon mode. For this site, we also find that the zero-phonon line of the ⁷F₀ to ⁵D₀ transition, which is forbidden, is much weaker than the phonon-coupled excitation transitions. The ratio of zero-phonon to phonon-coupled transition strength depends on the crystalline quality of the layer. These observations are consistent with the assignment of the majority site to an unperturbed Eu ion on Ga position. We find that the relative abundance of the majority site is strongly underestimated whenever the zero-phonon ⁷F₀ to ⁵D₀ excitation transition is used as a measure.     

Purification and cloning of a thermostable manganese catalase from a thermophilic bacterium

We have purified a heat-stable catalase from a thermophilic bacterium, Thermus species strain YS 8-13. The enzyme was purified 160-fold from crude cellular extracts and possessed a specific activity of 8000 units/mg at 65 degrees C. The purified enzyme displayed the highest activity at pH 7 to 10 and temperatures around 85 degrees C. The catalase was determined to be a manganese catalase, based on results from atomic absorption spectra and inhibition experiments using sodium azide. The enzyme was composed of six identical subunits of molecular weight 36,000. Amino acid sequences determined from the purified protein were used to design oligonucleotide primers, which were in turn used to clone the coding gene. The nucleotide sequence of a 1.4-kb fragment of Thermus sp. YS 8-13 genomic DNA containing a 909-bp open reading frame was determined. The gene encoded a 302-residue polypeptide of deduced molecular weight 33,303. The deduced amino acid sequence displayed a region-specific homology with the sequences of the manganese catalase from a mesophilic organism, Lactobacillus plantarum.     

Effect of different copper fillers on the electrical resistivity of conductive adhesives

The effects of different copper fillers with different morphology and particle size have been studied in terms of electrical resistivity and thermal stability on the electrically conductive adhesives. The copper fillers used in this study were prepared by wet chemical reduction, electrolytic and gas atomization method, respectively. The as cured ECAs filled with different type of Cu fillers showed significant difference in electrical resistivity. Cu filler with smaller particle size showed higher packing density and larger surface area, which would enhance formation of conductive channels and increased conductive network in the ECAs, leading to a lower electrical resistivity. In addition, thermal stability of the ECAs were investigated under high temperature exposure at 125 °C and high humidity aging at 85 °C/85% RH for 1,000 h. Results showed that ECAs with Cu fillers of relatively small particle size and rough particle surface have excellent thermal stability due to enhanced adhesion and contact area between Cu fillers and the polymer matrix. A very low resistivity at an order of magnitude of 10^?4 ?? cm could be maintained for these ECAs after 1,000 h at 125 and 85 °C/85% RH.     

Hydrogen incorporation in tungsten deposits growing by deuterium plasma sputtering

Tungsten deposits were produced by sputtering method using hydrogen isotope RF plasma, and the density and the incorporated components in the deposits were investigated. The density changed in the range from 14.2 g/cm³ to 6.1 g/cm³, and hydrogen isotope retention changed in the range from 0.25 to 0.05 as (H + D)/W by the difference of deposition conditions. Both the density and hydrogen isotope retention tended to decrease with an increase of pressure. Even though a deuterium gas was used for producing tungsten deposits, not only deuterium but also hydrogen, oxygen and water vapor were incorporated in the deposits. It is considered that the incorporation of these components originated in water vapor unintentionally existing in the vacuum chamber.     

Cold repeated forming of compact for aluminium foam

A cold repeated forming process of compacts for producing metal foams was developed in order to strongly bond powder particles. In this process, the compact undergoes severe plastic deformation for the strong bonding of particles by repeated backward extrusion and cup compression, and thus the compact largely foams owing to the accumulation of gas released from blowing agents inside the compact during heating. The cold repeated forming process without heating is much simpler than that for the conventional hot extrusion process. The relative density of the foam was decreased by adding silicon powder to the compact, and an aluminium foam having a relative density of 0.27 was obtained using two repeats of backward extrusion and cup compression, 1.5 mass% titanium hydride powder and 4 mass% silicon powder. In addition, a one-piece foam was successively produced from the bonding of two compacts during the foaming in a die. It was found that the cold repeated forming of compacts is effective for the production of metal foams.     

Characteristics of creeping discharge developed in a narrow gap between insulators and effect of a backside electrode

Discharge characteristics have been investigated for a needle–plane electrode configuration containing insulating barriers with a narrow gap which has been placed between the needle and the plane. The characteristics of creeping discharge developed in the narrow gap of the barrier filled with SF₆ are especially considered. In the case of a configuration with a backside electrode below the needle, the corona generated from the needle easily extended to the gap. On the other hand, for a configuration without a backside electrode, the corona has hardly extended to the gap, and on increasing the applied voltage the corona developed greatly in the gap. This difference in corona extension should affect the flashover characteristics in the present system. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 146(2): 27–36, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10248