Polyacene capacitors

We fabricated two types of polyacene capacitor with extremely stable polyacenic semiconductor (PAS) as the positive and negative electrodes. The first one is a coin-type PAS capacitor (six different sizes), which possesses large capacity with high reliability. Its capacity is much larger than that of the conventional electric double-layer capacitor which uses activated carbon as electrode. PAS capacitor can maintain more than 70% of the initial capacity even after 100 000 cycles. Moreover, this capacitor can be charged and discharged in a few minutes as well as at low rate. The second one is a cylinder-type PAS capacitor (diameter: 18 mm, height: 65 mm) which shows high capacity of 100 F and can discharge at the extremely high rate of 80 C. The coin-type PAS capacitor is currently used for memory back-up of electrical and communication equipment, and the cylinder-type is considered to be useful as power back-up for starting drive parts of electric equipment which needs high power density.     

Glucosamine Extends the Lifespan of Caenorhabditis elegans via Autophagy Induction

Glucosamine (GlcN) is commonly used as a dietary supplement to promote cartilage health in humans. We previously reported that GlcN could induce autophagy in cultured mammalian cells. Autophagy is known to be involved in the prevention of various diseases and aging. Here, we showed that GlcN extended the lifespan of the nematode Caenorhabditis elegans by inducing autophagy. Autophagy induction by GlcN was demonstrated by western blotting for LGG-1 (an ortholog of mammalian LC3) and by detecting autophagosomal dots in seam cells by fluorescence microscopy. Lifespan assays revealed that GlcN-induced lifespan extension was achieved with at least 5 mM GlcN. A maximum lifespan extension of approximately 30 % was achieved with 20 mM GlcN (p<0.0001). GlcN-induced lifespan extension was not dependent on the longevity genes daf-16 and sir-2.1 but dependent on the autophagy-essential gene atg-18. Therefore, we suggest that oral administration of GlcN could help delay the aging process via autophagy induction.     

ON A NUMERICAL TREATMENT OF UNSTEADY THERMAL-STRESS PROBLEMS BASED ON THE EULER-MACLAURIN SUMMATION RULE

This paper is concerned with an approximate method of solution for unsteady thermal-stress problems. An attempt to establish an improved finite-difference pattern is developed with the aid of numerical integration by using the Euler-Maclaurin summation formula. The proposed numerical method is reasonably well formulated, with a higher order of accuracy than the well-known finite-difference scheme.     

Interface microstructure evolution of dissimilar friction stir butt welded F82H steel and SUS304

The dissimilar butt welded joint of reduced-activation ferritic/martensitic steel (RAF/M) F82H and austenite stainless steel (AISI304 (SUS304)) were studied by friction stir welding. The effect of the position of the steels and tool plunging was considered in order to prohibit the mixing of the F82H and SUS304. When the dissimilar butt welding was performed such that the F82H plate was on the advancing side and the tool was plunged on the F82H side, defect-free joints could be successfully fabricated. Optical microscopy and EDX analysis were used to characterize the dissimilar joint microstructures and the interface. It was confirmed that the dissimilar joint formed no mixed structure and inter-metallic compounds.     

OPTIMIZATION OF MATERIAL COMPOSITION OF FUNCTIONALLY GRADED PLATE FOR THERMAL STRESS RELAXATION USING A GENETIC ALGORITHM

In this article, a genetic algorithm is applied to an optimization problem of material composition for a plate of step-formed functionally graded materials. The step-formed functionally graded plate is analyzed as a laminated composite plate made of numerous layers with homogeneous and different isotropic material properties. First, the onedimensional transient temperature distribution for a laminated plate is analyzed theoret ically. In addition, the thermal stress components for such an infinitely long plate are formulated under the mechanical condition of being traction-free. As a numerical example, a plate composed of zirconium oxide and titanium alloy is considered. In addition, for the optimization problem of minimizing the thermal stress distribution, the numerical calculations are made using a genetic algorithm without supposing a distribution function of material composition and the optimal material composition of each layer is determined taking into account the effect of the temperature dependency of material properties. Furthermore, the results obtained when a distribution function isn't specified and the results found when a distribution function is specified are compared.     

Lipid components,fatty acid distributions of triacylglycerols and phospholipids in rice brans

Endogenous tocochromanols in extracted lipids from rice brans of the five cultivars were determined by high-performance liquid chromatography, and were investigated in relation to the fatty acid (FA) distribution of triacylglycerols (TAG) and phospholipids (PL). The dominant tocols were α-tocopherol and γ-tocotrienol, followed by α-tocotrienol and with much smaller amounts of γ-tocopherol and δ-tocotrienol. The lipids of these rice brans comprised mainly TAG (80.6–86.0 wt.%), free FA (4.2–9.0 wt.%), and phospholipids (5.5–6.7 wt.%), whilst other components were also detected in minor proportions (0.2–2.1 wt.%). The PL components included phosphatidyl choline (31.8–46.8 wt.%), phosphatidyl ethanolamine (25.0–38.9 wt.%) and phosphatidyl inositol (20.2–23.2 wt.%). Comparison of these different cultivars showed, with a few exceptions, no significant differences (P > 0.05) in FA distribution. FA distribution of TAG among the five cultivars was evident in the rice brans: unsaturated FA were predominantly concentrated at the sn-2 position and saturated FA primarily occupying the sn-1 or sn-3 position. These results suggest that the tocopherol content, lipid component, and FA distribution in rice brans are not dependent on the cultivation areas during the growing season.     

Deletion and insertion of a 192-residue peptide in the active-site domain of glycosyl hydrolase family-2 beta-galactosidases

The monomeric multimetal-binding beta-galactosidase of Saccharopolyspora rectivirgula (srbg), a glycosyl hydrolase family-2 enzyme, has a unique sequence consisting of 192 amino acid residues with no similarity to known proteins. This 192-residue sequence (termed the "iota [iota] sequence") appears to be inserted into a sequence homologous to the active-site domain of the Escherichia coli lacZ enzyme (lacZbg). To assess the effects of the t sequence at specific sites of beta-galactosidase on the catalytic functioning and molecular properties of beta-galactosidase, deletion or insertion mutants of beta-galactosidases were constructed, expressed in LacZ- E. coli strains, and characterized: srbgdelta in which the iota sequence was deleted from srbg, and lacZbgI, in which the 192-residue iota sequence was inserted into the corresponding position (between Asp591 and Phe592) in the active-site domain of lacZbg. srbgdelta was a catalytically inactive, dimeric protein which retained multimetal-binding characteristics, suggesting that the iota sequence is very important for maintaining the structure necessary for the catalytic functioning and the monomeric structure of srbg but is not responsible for the unique metal ion requirements of srbg. On the other hand, lacZbgI existed as a mixture of a monomer, a tetramer, and higher multimers. The monomeric species was inactive, whereas the tetramer and other multimers were catalytically active (V(max )K(m) value, 25% of that of lacZbg) and highly specific for beta-D-galactoside. The tetrameric lacZbgI was activated by Mg2+ and Mn2+ with lowered metal affinities, and the stoichiometry of metal binding was unchanged from that of lacZbg. These results, along with the published stereo structure of lacZbg, suggest that, in lacZbgI, the inserted 192-residue iota peptide could fold independently of the lacZbg domains into a "sub-domain," lying distant from the active site and subunit interfaces.     

Novel sugar phosphotransferase system applicable to the efficient labeling of the compounds synthesized via the non-mevalonate pathway in Escherichia coli

It is known that 1-deoxy-D-xylulose taken up by Escherichia coli is used as the precursor of the compounds synthesized via the non-mevalonate pathway, such as isoprenoids, probably after conversion into 1-deoxy-D-xylulose 5-phosphate. In this report, we show that a novel phospho(enol) pyruvate-dependent phosphotransferase system catalyzes the uptake and phosphorylation of 1-deoxy-D-xylulose.