Response to walnut olfactory and visual cues by the parasitic wasp Diachasmimorpha juglandis

Diachasmimorpha juglandis is a specialist parasitoid attacking fly larvae in the genus Rhagoletis that feed exclusively on walnut fruit husks. In a free-foraging assay comparing response to uninfested, infested, and mechanically damaged fruits, we first determined that D. juglandis use host feeding damage on the fruit as a cue for host presence. In another free-foraging assay that used artificial walnut models and wind tunnel experiments, D. juglandis distinguished infested from uninfested fruits by using either olfactory or visual cues separately. However, the response rate of wasps in the wind tunnel was raised considerably when visual cues were also available. We analyzed the volatile compounds emitted by cohorts of uninfested, mechanically damaged, and infested fruits 1, 3, 5, 8, and 10 days after oviposition by flies into the infested fruits. Total volatile emissions did not differ significantly among treatments, but quantitative changes in volatiles distinguished infested fruits from uninfested and damaged fruits. The fact that parasitoids did not distinguish between infested and damaged fruits in assays where damage was visible indicates that they rely on visual cues when those are available.     

The Effects of Power Law Fluid Rheology on Coil Heat Transfer for Agitated Vessel in the Transitional Flow Regime

A CFD model of heat transfer from power‐law fluids to helical cooling coils in the transitional flow regime of a baffled tank mixed with a pitched blade turbine was developed with Fluent^TM. The model captured local temperature and velocity gradients. Simulations were run, varying Re, Pr, K and n. The results indicate that a Sieder‐Tate type correlation, with the exponent on and the coefficient in front of the Reynolds number being a function of n, is recommended for estimating ho. Also, a new two coil bank design was found to be more efficient when 450 < Re < 650.     

A scalable solution to the nearest neighbor search problem through local-search methods on neighbor graphs

Pattern Analysis and Applications - Nearest neighbor search is a powerful abstraction for data access; however, data indexing is troublesome even for approximate indexes. For intrinsically...     

Flocking of Multi-agent Systems with Unknown Nonlinear Dynamics and Heterogeneous Virtual Leader

This paper investigates the flocking control of multi-agent systems with unknown nonlinear dynamics while the virtual leader information is heterogeneous. The uncertain nonlinearity in the virtual leader information is considered, and the weaker constraint on the velocity information measurements is assumed. In addition, a bounded assumption on the unknown nonlinear dynamics is also considered. It is weaker than the Lipschitz condition adopted in the most flocking control methods. To avoid fragmentation, we construct a new potential function based on the penalty idea when the initial network is disconnected. A dynamical control law including a adjust parameter is designed to achieve the stable flocking. It is proven that the velocities of all agents approach to consensus and no collision happens between the mobile agents. Finally, several simulations verify the effectiveness of the new design, and indicate that the proposed method has high convergence and the broader applicability in practical applications with more stringent restrictions.

     

An investigation of phase transformation behavior in sputter-deposited PtMn thin films

Sputter-deposited, equiatomic PtMn thin films have application in giant magnetoresistive spin valves, tunneling magnetoresistive spin valves, and magnetic random access memory. However, the as-deposited films are found to be a disordered A1 phase in a paramagnetic state rather than an antiferromagnetic phase with L1₀ structure, which is needed for device operation. Therefore, a postannealing step is required to induce the phase transformation from the asdeposited A1 face-centered-cubic phase to the antiferromagnetic L1₀ phase. The A1 to L1₀ metastable transformation was studied by x-ray diffraction and differential-scanning calorimetry. An exothermic transformation enthalpy of −12.1 kJ/mol of atoms was determined. The transformation kinetics were simulated using the Johnson-Mehl-Avrami analysis.     

Intrinsic reactivity of gold nanoparticles: Classical, semi-empirical and DFT studies

Gold nanoparticles used in most experiments (1–10 nm) in gold catalysis show varying degrees of reactivity, with particles below 5 nm generally being more reactive. The origin of this activity is a subject of a number of model experiments and theoretical studies on either clusters of a few atoms in size or extended surfaces (smooth or stepped). In the work described here, a classical theory for the variation of the metal workfunction with cluster size, Extended Hückel Theory (EHT) calculations combined with DFT calculations, as well as a carbon monoxide (CO) chemisorption model are combined to develop a relationship between metal particle size and the particle's reactivity towards CO. For gold, it is shown that while the contribution of the d-band hybridization energy to the total CO chemisorption energy is unfavourable for bulk gold, this is not true for gold particles below 5–6 nm. That is, the d-band hybridization energy is negative for small gold particles. This is believed to be explanation of the onset of high reactivity for small gold particles.     

Elevated temperature Mg-Al-Sr: Creep resistance,mechanical properties,and microstructure

Mg-Al-Sr-based alloys (AJ alloys) have shown superior creep performance and tensile strength at temperatures as high as 175° with stresses up to 70 MPa. Mg-6Al-2.4Sr (AJ62x) exhibits an optimum combination of creep resistance and excellent castability, while AJ62Lx (strontium <2.1) has better ductility than other AJ formulations. The AJ alloy microstructure is characterized by the Al₄Sr-α(Mg) lamellar phase that forms at the interdendritic/grain boundary region of the primary magne sium matrix. Mg-5Al-2Sr (AJ52x) contains a ternary phase that was tentatively named Al₃Mg₁₃Sr. When the strontium level is low in AJ62x, the volume fraction of Al₄Sr is reduced, the aluminum supersaturation of the magnesium primary phase increases, and Mg₁₇Al₁₂ forms. In this article, a mechanism is proposed whereby the creep resistance decreases with the strontium level but the tensile strength and ductility increase. For more information, contact Eric Baril, Noranda, Noranda Technologies Centre, 240 Hymus Pointe-Claire (Montréal), Québec, H9R 1G5 Canada; (514) 630-9347; fax (514) 630-9379; e-mail eric.baril@ntc.noranda.com.     

Runout effects in milling: Surface finish, surface location error, and stability

This paper investigates the effect of milling cutter teeth runout on surface topography, surface location error, and stability in end milling. Runout remains an important issue in machining because commercially-available cutter bodies often exhibit significant variation in the teeth/insert radial locations; therefore, the chip load on the individual cutting teeth varies periodically. This varying chip load influences the machining process and can lead to premature failure of the cutting edges. The effect of runout on cutting force and surface finish for proportional and non-proportional tooth spacing is isolated here by completing experiments on a precision milling machine with 0.1 μm positioning repeatability and 0.02 μm spindle error motion. Experimental tests are completed with different amounts of radial runout and the results are compared with a comprehensive time-domain simulation. After verification, the simulation is used to explore the relationships between runout, surface finish, stability, and surface location error. A new instability that occurs when harmonics of the runout frequency coincide with the dominant system natural frequency is identified.     

Perfect Laplacians for Polygon Meshes

A discrete Laplace‐Beltrami operator is called perfect if it possesses all the important properties of its smooth counterpart. It is known which triangle meshes admit perfect Laplace operators and how to fix any other mesh by changing the combinatorics. We extend the characterization of meshes that admit perfect Laplacians to general polygon meshes. More importantly, we provide an algorithm that computes a perfect Laplace operator for any polygon mesh without changing the combinatorics, although, possibly changing the embedding. We evaluate this algorithm and demonstrate it at applications.     

Performance control for interconnection of identical systems: Application to PLL network design

In this paper, the problem of the control law design for interconnected identical systems ensuring the global stability and the global performance properties is under consideration. Inspired by the decentralized control law design methodology using the dissipativity input–output approach, the problem is reduced to the problem of satisfying two conditions: (i) the condition on the interconnection and (ii) the condition on the local subsystem dynamics. Both problems are efficiently solved applying a (quasi‐) convex LMI optimization and standard H_∞ synthesis. The proposed design methodology is applied to the control law design of a synchronous PLL network. Copyright © 2014 John Wiley & Sons, Ltd.