Cyclo-energy detector for spectrum sensing in cognitive radio

In this paper, a cyclo-energy detector is proposed for the spectrum sensing problem based on the cyclostationary signal analysis. The proposed detector can determine the existence of primary user by estimating the primary user's received power according to the cyclostationarity features of the secondary user. By using this detector, the secondary user does not need to stop transmitting signals when sensing the frequency spectrum. Simulation results are presented to confirm the performance of the proposed detector.     

Association between Single Nucleotide Polymorphism rs1044925 and the Risk of Coronary Artery Disease and Ischemic Stroke

The present study was performed to clarify the association between the acyl-CoA:cholesterol acyltransferase-1 (ACAT-1) single nucleotide polymorphism (SNP) rs1044925 and the risk of coronary artery disease (CAD) and ischemic stroke (IS) in the Guangxi Han population. Polymerase chain reaction and restriction fragment length polymorphism was performed to determine the genotypes of the ACAT-1 SNP rs1044925 in 1730 unrelated subjects (CAD, 587; IS, 555; and healthy controls; 588). The genotypic and allelic frequencies of rs1044925 were significantly different between the CAD patients and controls (p = 0.015) and borderline different between the IS patients and controls (p = 0.05). The AC/CC genotypes and C allele were associated with a decreased risk of CAD and IS (CAD: p = 0.014 for AC/CC vs. AA, p = 0.022 for C vs. A; IS: p = 0.014 for AC/CC vs. AA; p = 0.017 for C vs. A). The AC/CC genotypes in the healthy controls, but not in CAD or IS patients, were associated with an increased serum high-density lipoprotein cholesterol (HDL-C) concentration. The present study shows that the C allele carriers of ACAT-1 rs1044925 were associated with an increased serum HDL-C level in the healthy controls and decreased risk in CAD and IS patients.     

Formation and Height of the Interconnected Fractures Zone after Extraction of Thick Coal Seams with Weak Overburden in Western China

Formation of a zone of interconnected fractures during coal mining is a key factor in mine flooding. Coal mines in western China are characterized by thick coal seams with mechanically weak overburden. In situ studies including drill core analysis, drilling fluid loss measurement, and borehole video monitoring were used at the working face 101 in Shaanxi Jinjitan coal mine to explore the maximum height of the interconnected fractures zone (IFZ). Also, tests on a scaled physical model and numerical simulation based on the drilling data were used to study the formation of the fractured zone. By considering data from other mines with similar mining conditions, a logarithmic relationship was found between the maximum height of the IFZ and the thickness of coal excavation. The maximum height of the IFZ was found to be 27 times the thickness of the excavated coal seam, which is far more than in coal mining areas in eastern China. Also, the IFZ in overlying strata of the study area was arch-shaped, not saddle-shaped, as had been observed in previous studies.     

温岭市东部新区北片污水处理厂工程设计方案

在温岭市东部产业集聚区的北片建成了温岭市东部新区污水处理工程—北片污水处理厂,近期处理规模为1万m3/d。采用多点进水A/A/O工艺,集约化布置,曝气采用抽吸式曝气搅拌一体机,深度处理采用微絮凝＋无阀滤池,尾水经加氯消毒后达到GB 18918—2002一级A排放标准后外排,部分回用于新区。该文介绍了该厂的处理工艺和设计参数,并对工程设计中需要考虑的问题进行了分析,总结了工程特点。     

工艺过程水中油的高效脱除试验

以铀钼矿酸浸—萃取工艺的过程水为研究对象,采用北京矿冶科技集团有限公司自主开发的BGS102除油树脂,针对酸性萃余液进行深度除油处理,以砂滤作为前置过滤,降浊并除去大部分油质,减缓对树脂的消耗,再以110mL/min的进液速度通过树脂柱,进行深度除油,除油后萃余液油含量低于10mg/L,回收有机相,降低系统消耗;BGS102树脂经反洗再生15次后,除油率保持在90%以上,干树脂油吸附饱和容量为93mg/g。     

Synthesis method based on solution regions for planar four-bar straight-line linkages

An analytical method for synthesizing and selecting desired four-bar straight-line mechanisms based on solution regions is presented. Given two fixed pivots, the point position and direction of the target straight-line, an infinite number of mechanism solutions can be produced by employing this method, both in the general case and all three special cases. Unifying the straight-line direction and the displacement from the given point to the instant center into the same form with different angles as parameters, infinite mechanism solutions can be expressed with different solution region charts. The mechanism property graphs have been computed to enable the designers to find out the involved mechanism information more intuitively and avoid aimlessness in selecting optimal mechanisms.     

分布式系统大数据分层调度算法

互联网时代数据量激增,数据的抓取调度已成为有效采集关键信息的重点问题。提出一种分布式系统的大数据分层调度算法,该算法依据数据集的维度特征属性,利用凝聚层次聚类对数据集进行分层处理,结合小型Hadoop分布式系统实现数据集分层调度。该算法为互联网时代下大数据的快速采集调度问题提出了一种新的解决思路。