Pilocytic astrocytomas of the posterior fossa. A follow-up study in 33 patients

The extent of resection in pilocytic astrocytoma of the posterior fossa often remains undefined and the indications for further treatment in incompletely resected tumours are a matter of debate. It has been also realized that the problem of hydrocephalus in patients with pilocytic astrocytoma of the posterior fossa has not yet been solved and the diagnostic impact of postoperative CT findings remains questionable. We retrospectively reviewed the data from 33 patients harbouring a pilocytic astrocytoma of the posterior fossa to evaluate the impact of surgical technique in terms of radicality and of postoperative imaging results upon prognosis and adjunctive treatment. In addition, the issue of hydrocephalus was considered and related to different treatment modalities. Thirty patients underwent surgical treatment whereas 3 had open biopsy of the tumour. Macroscopically gross total resection of the tumour was performed in 20 patients, whereas resection was partial in 10. Follow-up was obtained in 29 patients for a period which ranged between 2 and 184 months (85 months +/- 56 months). Outcome was good in 24 patients who had only slight neurological deficit and poor in 3 patients, who were severely disabled. Two patients died during the follow-up period. Recurrent tumour growth occurred in 2 cases with incompletely resected tumours. From the series presented, it was concluded that long-term follow-up with CT seems mandatory in cases with contrast-enhancing residual tumour. Recurrent tumour growth should be assumed in postsurgical patients with an enlarging area of enhancement shown in follow-up CT studies. Permanent ventriculoperitoneal shunting is required in certain patients with pre- or postoperative hydrocephalus.(ABSTRACT TRUNCATED AT 250 WORDS)     

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO2 for no reduction by NH3

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO₂ for NO reduction by NH₃ was examined in a fixed-bed flow reactor. The deactivation of the catalyst was strongly dependent on reaction temperature. At high reaction temperatures over 300°C, the catalyst did not lose its initial activity up to 50 h of operation, regardless of SO₂ feed concentration from 500 to 20,000 ppm. However, at low reaction temperatures near 250°C, apparent deactivation did occur. Changes in the physicochemical properties such as surface area and sulfur content of deactivated catalyst well correlated with catalyst activity, depending upon reaction temperatures. The deactivation was due to pore blocking and/or filling by deactivating agents, which plugged and/or filled the pores of catalyst. The deactivating agents deposited on the catalyst surface were presumed to be (NH₄)₂SO₄ and/or (NH₄)HSO₄ from the results of TGA and ion-chromatography measurement.     

Characterization of C-S-H from Highly Reactive β-Dicalcium Silicate Prepared from Hillebrandite

β-dicalcium silicate synthesized by thermal dissociation of hydrothermally prepared hillebrandite (Ca₂(SiO₃)(OH)₂) exhibits extremely high hydration activity. Characterization of the hydrates obtained and investigation of the hydration mechanism was carried out with the aid of trimethylsilylation analysis, ²⁹Si magic angle spinning nuclear magnetic resonance, transmission electron microscopy selected area electron diffraction, and XRD. The silicate anion structure of C-S-H consisted mainly of a dimer and a single-chain polymer. Polymerization advances with increasing curing temperature and curing time. The C-S-H has an oriented fibrous structure and exhibits a 0.73-nm dreierketten in the longitudinal direction. On heating, the C-S-H dissociates to form β-C₂S. The temperature at which βC₂S begins to form decreases with increasing chain length of the C-S-H or as the Ca/Si ratio becomes higher. The high activity of β-C₂S is due to its large specific surface area and the fact that the hydration is chemical-reaction-rate-controlled until its completion. As a result, the hydration progresses in situ and C-S-H with a high Ca/Si ratio is formed.     

Metabolic changes in blood and liver of dairy cows during either feed restriction or administration of 1,3-butanediol.

Previous research has shown that a combination of feed restriction and dietary 1,3-butanediol starting at 14 d post-partum resulted in fatty liver and ketosis. Sixteen multiparous Holstein cows were used to determine effects of feed restriction or 1,3-butanediol as separate treatments. Treatments during d 14 to 42 postpartum were 1) control (ad libitum intake), 2) 20% feed restriction, or 3) control plus dietary 1,3-butanediol (5.5% of DM). From d 43 to 56, cows assigned to treatments 2 and 3 received a combination of feed restriction and butanediol. One cow on treatment 2 developed ketosis, but not fatty liver, after only 4 d of feed restriction. No other cows developed fatty liver or ketosis. Both treatments decreased milk production compared with controls. Feed restriction increased the extent of negative energy balance and caused transient increases in concentrations of NEFA, acetate, and beta-hydroxybutyrate in plasma. Concentrations of beta-hydroxybutyrate and insulin in plasma were increased by butanediol, which is a potent ketone body precursor. Concentration of glycogen in liver was less in feed-restricted cows, whereas glycogen and total lipid were greater in cows given butanediol separately. Gluconeogenic capacity of liver slices was not different among groups. Addition of 1,3-butanediol to in vitro incubation media decreased oxidation of propionate to CO2. Neither feed restriction nor dietary 1,3-butanediol as separate treatments induced the fatty liver and ketosis observed in earlier experiments in which the two treatments were given together.     

Monolithically integrated four-channel receiver array using diffused InGaAs (JFET technology)

Four-channel receiver arrays have been fabricated by monolithically integrating diffused InGaAs JFET-based electronics with InGaAs pin photodiodes. Cascode and simple inverter transimpedance amplifier circuits have been produced, both of which use a micro-FET as a tunable feedback element to vary bandwidth between 20 and 800 MHz. A sensitivity of -28.2 dBm was achieved at 1.25 Gbit/s with crosstalk between adjacent channels of -50 dB (electrical).<>     

Heparin Use in Daily Hemodialysis

More frequent dialysis is thought to be associated with increased heparin requirements; however, limited data are available which compare heparin requirements of conventional to daily dialysis. Objectives: To determine differences in heparin dose during conventional thrice‐weekly dialysis (CHD) compared to daily hemodialysis (DHD). Methods: All patients within the daily home hemodialysis at the Northwest Kidney Centers were evaluated for heparin dose both pre‐ and post initiation of daily hemodialysis. Patients on DHD received an initial bolus of heparin, without a continuous heparin drip, and supplemental heparin midway through the dialysis run as needed to maintain adequate activated clotting times (ACTs). CHD patients received a heparin bolus, followed by initiation of heparin drip as needed to maintain adequate ACTs. Results: Of the 1117 patients who dialyze at the NKC, 55% were Caucasian, 21% African‐American, 20% Asian/Pacific Islander, and 35% were of other ethnicity. The majority of patients were greater than 60 years (56%), while 36% ranged from 40–60 years and 13% ranged from 20–40 years. Male patients constituted 54% of patients. Diabetes was the primary cause of renal disease (36%), followed by hypertension (21%) and glomerular disease (18%). Of those patients in the home hemodialysis program (n = 45), 10 patients started daily home hemodialysis using the Aksys daily home hemodialysis system. Of those, the majority was male (100%), Caucasian (78.8%) with an average age of 46.7 ± 18 years. Glomerulonephritis was the primary cause of end‐stage renal disease (40%), while the percentages of other diseases were similar [Alport's syndrome (20%), hypertension (20%) and diabetes (10%)]. Compared to initial DHD heparin requirements (10,111 ± 2219 units), CHD heparin dose requirements (6833 ± 2715 units) were significantly lower (p = 0.045); however, total heparin needs were similar between groups (10,166 ± 4380 units vs. 10,778 ± 2959 units) (p = 0.324). Conclusion: Although patients initiating DHD have greater initial heparin requirements than when on CHD, total heparin doses remain similar to those required on conventional thrice‐weekly hemodialysis. Greater initial heparin doses required during short daily dialysis appear safe compared to those of conventional dialysis.     

Performance of a turbo‐coded CDMA system in a mobile satellite channel

The bit error rate (BER) performance of a turbo‐coded code‐division multiple‐access (CDMA) system operating in a satellite channel is analysed and simulated. The system performance is compared for various constituent decoders, including maximum a posteriori probability (MAP) and Max‐Log‐MAP algorithms, and the soft‐output Viterbi algorithm. The simulation results indicate that the Max‐Log‐MAP algorithm is the most promising among these three algorithms in overall terms of performance and complexity. It is also shown that, for fixed code rate, the BER performance is improved substantially by increasing the number of iterations in the turbo decoder, or by increasing the interleaver length in the turbo encoder. The results in this paper are of interest in CDMA‐based satellite communications applications. Copyright © 2005 John Wiley & Sons, Ltd.     

Structural properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 relaxor ferroelectric thin films on SrRuO3 conducting oxides

Coating of 0.65Pb(Mg_1/3Nb_2/3)O₃–0.35PbTiO₃ (PMN–PT) relaxor ferroelectrics by a sol–gel method is followed by growth of epitaxial SrRuO₃ (SRO) metallic oxide electrodes on SrTiO₃ (STO) single-crystal substrate by pulsed laser deposition. High-quality PMN–PT films on SRO with preferred growth orientation were successfully fabricated by controlling the operation parameters. Structural properties of relaxor ferroelectric PMN–PT thin films on SRO/STO substrates have been studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and atomic force microscopy (AFM). In-plane and out-of-plane alignments of the heterostructure are confirmed and the structural twinning of the materials are also revealed.