Spatial-frequency-tuned mechanisms of the red-green channel estimated by oblique masking

The sustained spatial-frequency-tuned (SF-tuned) mechanisms of nonoriented units were examined by means of orthogonal masking for the Red-Green (R-G) color channel, and those of oriented units by oblique masking for the achromatic channel but not for the color channels. An oblique-masking technique minimizes the artifacts that are due to spatial phase effects, local cues, spatial beats, spatial probability summation, and changing criteria. Therefore the spatial characteristics of the R-G color channel are now investigated by an oblique-masking technique and linked with my paper on orthogonal masking [J. Opt. Soc. Am. A 15, 1 (1998)]. The R-G channel was defined by the minimum-flicker and hue-cancellation techniques. A color monitor system was used to generate spatially localized (D6) vertical color test patterns [0.063-8 cycles per degree (cpd)] and sinusoidal oblique color masks (0.031-16 cpd, 1.2-60% contrasts). Color contrast sensitivity functions (CSFs), threshold elevation (TE) versus mask SF (TvSF) curves, and TE versus mask contrast (TvC) curves were measured by the method of constant stimuli with a two-interval forced-choice technique by using Powell's achromatizing lens under sustained (Gaussian, 2-s-duration) conditions. Results show the following: (1) The color CSF is a low-pass function of SF with average half-height SF of 0.7 cpd and cutoff SF of 14 cpd with the use of a color-detection criterion. (2) TvSF curves are broadly bandpass and fall into five groups, peaking at approximately 0.13, 0.5, 2, 4, and 8 cpd. The root-mean-square cone-color CSF is 3.8-5.4 times the stimulus-color CSF. (3) A "crowding effect" similar to that of the TvSF curves of the achromatic channel was also found, but the TvSF curves of the R-G channel are not sharply peaked, similar to the result for orthogonal masking. Data analysis led to the following conclusions: (1) A simple multiple-mechanism model yields one low-pass color mechanism (with average half-height SF of 0.54 cpd) and five bandpass SF-tuned color mechanisms; these six mechanisms are necessary to explain the CSF, TvSF, and TvC data simultaneously. (2) The bandpass mechanisms peaked at approximately 0.13, 0.5, 2, 4, and 8 cpd with average full bandwidths at half-heights of 3.6, 3.2, 2.1, 1.2, and 1.3 octaves, respectively. (3) Since oblique-masking color mechanisms (unlike achromatic oriented mechanisms) have broad orientation tuning under sustained conditions and there is a significant orthogonal masking, the oblique-masking color mechanisms may have contributions from both oriented and nonoriented units. (4) The high degree of similarity between the SF-tuned filters of mechanisms derived from oblique- and orthogonal-masking data suggests that most of the chromatic SF tuning is already accomplished by nonoriented units. (5) The quality of the fit to oblique- and orthogonal-masking data combined dropped enough to reject the hypothesis that the former taps the performance of only the same nonoriented mechanisms as those by the latter. Adding gain parameters that reduce the TEs for orthogonal masking gave a better fit, suggesting that orientation gains are one of the factors involved in the transformation of information from nonoriented to oriented mechanisms. However, the fit was still worse than that for oblique-(6) Since masking-alone or orthogonal-masking-alone data, suggesting that more factors may be involved. primate parvo lateral geniculate nucleus (pLGN) units behave in a fairly linear manner, the color contrast nonlinearity (which follows the linear filter) of a mechanism may be post-pLGN.     

Color-luminance interaction: data produced by oblique cross masking

Threshold-elevation (TE-) versus-mask-spatial-frequency (SF) curves and TE-versus-mask-contrast curves, produced by the oblique-masking technique, were reported for uncrossed stimuli (color-test-on-color-mask and luminance-test-on-luminance-mask) [Invest. Ophthalmol. Visual Sci. Suppl. 34, 751 (1993) and Vision. Res. 23, 873 (1983)]. The technique minimizes the artifacts that are due to spatial phase effects, spatial beats, spatial probability summation, and local cues. My goal was to measure these curves for crossed stimuli (color-test-on-luminance-mask and luminance-test-on-color-mask) by this oblique-masking technique and to compare the curves with those reported in previous studies. For this purpose threshold contrasts were measured by a yes-no procedure with randomized double staircases. Test targets were vertical spatially localized (D6) patterns, and masks were oblique sinusoidal patterns; both the test and the mask were presented simultaneously, for 2 s (Gaussian window), on a color monitor interfaced with an ATVista system and a Powell achromatizing lens. The test SF's were 0.125, 0.5, 2, 4, and 8 cycles per degree (cpd); mask SF's were 0.031-16 cpd; and mask contrasts were 6.25%-50%. Furthermore, the Red-Green channel was defined by the minimum flicker and the hue cancellation techniques. Results show mostly masking effect (TE > 1) at contrasts above threshold; sometimes, separability (TE = 1) and above-threshold facilitation (TE < 1) effects were also observed, depending on the test SF, the mask SF, the mask contrast, and the subject. In general, the magnitudes of TE's are smaller and the TE-versus-mask-SF curves are slightly narrower for the oblique-cross-masking conditions than those for the respective oblique uncross masking. In addition, the TE-versus-mask-contrast curves for the crossed conditions are mostly shallower than those for the respective uncrossed conditions. Furthermore, mostly the color-luminance asymmetry (color masks luminance more than luminance masks color) is found, in mild form, for SF's > or = 0.5 cpd. For the lower SF of 0.125 cpd, there is either a lack of asymmetry or a very mild asymmetry of the opposite kind (luminance masks color slightly more than color masks luminance) seems to prevail. In general, the oblique-masking data shows mild asymmetry and reduced facilitation; both are consistent with reduced local cues, similar to those shown by randomized phase data, thus making the data suitable for SF analysis; moreover, at high contrast, the masking data are consistent with those reported in previous studies.     

Extreme learning machine and bayesian optimization-driven intelligent framework for IoMT cyber-attack detection

The Journal of Supercomputing - The Internet of Medical Things (IoMT) is a bionetwork of allied medical devices, sensors, wearable biosensor devices, etc. It is gradually reforming the healthcare...     

STUDIES ON THE ADSORPTION OF FURFURAL FROM AQUEOUS SOLUTION ONTO LOW-COST BAGASSE FLY ASH

The present study deals with the sorptive removal of furfural from aqueous solution by carbon-rich bagasse fly ash (BFA). Batch studies were performed to evaluate the influence of various experimental parameters, namely, initial pH (p H ₀), adsorbent dose, contact time, initial concentration, and temperature on the removal of furfural. Optimum conditions for furfural removal were found to be p H ₀ ≈ 5.5, adsorbent dose ≈4 g/L of solution, and equilibrium time ≈4 h. The adsorption followed pseudo-second-order kinetics. The effective diffusion coefficient of furfural is of the order of 10^?13 m²/s. Equilibrium adsorption data on BFA was analyzed by Freundlich, Langmuir, Dubnin-Radushkevich, Redlich-Peterson, and Temkin isotherm equations using regression and error analysis. The Redlich-Peterson isotherm was found to best represent the data for furfural adsorption onto BFA. Adsorption of furfural on BFA is favorably influenced by a decrease in the temperature of the operation. Values of the change in entropy (ΔS ⁰) and heat of adsorption (ΔH ⁰) for furfural adsorption on BFA were negative. The high negative value of change in Gibbs free energy (ΔG ⁰) indicates the feasible and spontaneous adsorption of furfural on BFA.     

Effect of accelerated aging on the tensile index of a synthetic insulation paper

This paper explores the possibility of using tensile index as one of the appropriate end point parameters to determine the thermal index of a synthetic insulation paper. The paper samples were aged at three different times and temperatures. The tensile index of fresh as well as aged samples was determined experimentally. The study showed that tensile index could be considered as an appropriate parameter to find the thermal index of the chosen synthetic insulation paper.     

碳纳米管增强银复合材料的导热性(英文)

通过分子水平层级混合制备了碳纳米管增强银基复合材料。研究了碳纳米管的类型(单壁/多壁)及功能化模式(共价键/非共价键)对银复合材料导热性的影响。XRD及EDS结果表明,复合材料中存在银与碳。高分辨率扫描电镜和透射电镜结果表明碳纳米管均匀地嵌在银基体中。利用拉曼光谱和FTIR研究了共价键功能化对多壁碳纳米管的影响。共价键功能化后,碳纳米管中引入了功能团且保持结构完整。利用激光闪光技术以及有效介质理论研究了复合材料的导热性。实验结果表明:加入共价功能化的单壁和多壁纳米碳管后,材料的导热性降低。但加入非共价键功能化的多壁碳纳米管后,复合材料的有效导热性增强,这与不考虑界面热阻时的有效介质理论预测结果一致。     

Discussion on Barkhausen and Nyquist stability criteria

Most textbooks on analog circuits and signal processing describe the Barkhausen criterion pertaining to the determination of sinusoidal oscillations in a closed-loop system. On the other hand, the Nyquist stability criterion is well known, as discussed in most textbooks on control systems. Recently, some examples in which the Barkhausen criterion fails to produce the correct condition for startup of oscillations have been reported. In the present paper, an explanation of oscillation startup based on the Nyquist stability criterion is given and the close relationship between the Barkhausen and the Nyquist criteria highlighted. It is shown that the Nyquist criterion (which is a rigorous technique) is a more robust approach than the Barkhausen criterion concerning the determination of sinusoidal oscillations in a closed-loop system and that the Barkhausen criterion (whenever it yields the correct result) is subsumed by the Nyquist criterion as a special case. The textbooks usually describe the Barkhausen criterion as a separate topic, i.e., do not discuss the relationship of this criterion with the Nyquist criterion. It is, therefore, felt that the present discussion will go a long way to put the subject in a broader perspective.     

Multi Response Optimization on Machinability of SiC Waste Fillers Reinforced Polymer Matrix Composite Using Taguchi’s Coupled Grey Relational Analysis

Silicon - Recycling and reutilization of industrial waste is one way to minimize land pollution to attain green environment. In this research waste SiC grinding wheel was ball milled to powder form...     

Green biomass bistable transistor multivibrator

For the first time a biomass bistable transistor multivibrator using an NPN Philips transistor as the active device and freshly plucked green Champo (Plumaria rubra) leaf cuttings as electrical components (resistance R and capacitance C) has been realized. The frequency and other parameters of the generated pulses, along with the circuit configuration, are presented. The development envisages a novel march towards a green revolution in electronic circuitry.