Effect of isomerization on thermal behaviour of bisitaconimides

The effect of isomerization of N,N′‐bisitaconimido‐4,4′‐diphenyl ether to the corresponding biscitraconimide on the curing characteristics and thermal stability of cured resins is described. Resins having bisitaconimide:biscitraconimide ratios of 23:77–93:7 were prepared by reacting 4,4′‐diaminodiphenyl ether with itaconic anhydride in solvents of different polarities and under different reaction conditions. Resins containing a higher proportion of citraconimide had a lower melting point (191 vs 208 °C). The curing exotherm was observed immediately after melting in all the resins and exothermic peak temperature reduced with increase in citraconimide content. Resins having a higher proportion of citraconimide on isothermal curing (200 °C, 2 h) and subsequent heating in nitrogen atmosphere degraded at a slightly lower temperature. However, the char yield at 800 °C did not show any systematic dependence on citraconimide content. © 2002 Society of Chemical Industry     

Synthesis and characterization of butyl acrylate/methyl methacrylate/glycidyl methacrylate latexes

The butyl acrylate (BA)/methyl methacrylate (MMA), and glycidyl methacrylate (GMA) composite copolymer latex was synthesized by seeded emulsion polymerization technique taking poly(methyl methacrylate) (PMMA) latex as the seed. Four series of experiments were carried out by varying the ratio of BA : MMA (w/w) (i.e. 3.1 : 1, 2.3 : 1, 1.8 : 1, and 1.5 : 1) and in each series GMA content was varied from 1 to 5% (w/w). The structural properties of the copolymer were analyzed by FTIR, ¹H‐, and ¹³C‐NMR. Morphological characterization was carried out using transmission electron microscopy (TEM). In all the experiments, monomer conversion was ～99% and final copolymer composition was similar to that of feed composition. The incorporation of GMA into the copolymer chain was confirmed by ¹³C‐NMR. The glass transition temperature (T_g) of the copolymer latex obtained from the differential scanning calorimetry (DSC) curve was comparable to the values calculated theoretically. With increase in GMA content, particles having core‐shell morphology were obtained, and there was a decrease in the particle size as we go from 2–5% (w/w) of GMA. The adhesive strength of the latexes was found to be dependent on the monomer composition. With increase in BA : MMA ratio, the tackiness of the film increased while with its decrease the hardness of the film increased. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Development of pellets of nifedipine using HPMC K15 M and κ-carrageenan as mucoadhesive sustained delivery system and in vitro evaluation

Polymeric mucoadhesive pellets of nifedipine were designed using computer software and they were prepared by extrusion-spheronization using HPMC K15M and κ-carrageenan with microcrystalline cellulose. A randomized rotatable two factor central composite design was applied for assessment of influence of two independent variables such as concentration of κ-carrageenan and HPMC K15M on dependent variables. Pellets were characterized by FTIR, DSC, SEM, flow properties, particle size, abrasion resistance, sphericity, drug content, percent production yield, in vitro drug release, ex vivo mucoadhesion, stability studies and similarity factor. The optimized formulation was selected based on criteria of sphericity nearest to 1.0 with maximum cumulative drug release percentage. Formulation NF6 exhibited sufficient porous spheres, free flowing and smooth surface mucoadhesion of 91.34 % and drug content 98.22 ± 0.37 %. Kinetic modeling revealed that the formulation followed the Higuchi model and showed the Quassi-Fickian drug release mechanism. The similarity factor, F2 value, was found to be 74 ± 6 and there was no significant change in drug content and ex vivo mucoadhesion after 90 days at 40 ± 2 °C, and 75 ± 5 % RH clearly indicated the optimized batch NF6 was stable. Thus, it can be concluded that use of κ-carrageenan, microcrystalline cellulose and HPMC K15M at the 20:35:10 w/w ratio could provide an effective carrier for enhancement of sphericity and sustained release of matrix pellets.     

Sol- gel synthesis of Ga2O3 nanorods and effect of precursor chemistry on their structural and morphological properties

Synthesis of mono-crystalline Ga₂O₃ Nanorods was done by sol-gel transformation of gallium(III) isopropoxide (Ga(OPrⁱ)₃). XRD studies were done to determine the planes and crystal structure of synthesized nanorods that showed the synthesis of β-Ga₂O₃(a). TEM studies of synthesized Ga₂O₃ confirmed the synthesis of monocrystalline β-Ga₂O₃ nanorods. To study the effect of precursor chemistry and to determine role of precursor structures on the crystal structure, phase and morphology of the Ga₂O₃, a new modified precursor complex was synthesized. The reaction of Ga(OPrⁱ)₃ with N-phenylsalicylaldimine, [C₆H₄(OH)CH=N(C₆H₅)] in 1:1?M ratio yielded [{(H₅C₆)N?=?CH-C₆H₄O}Ga(OPrⁱ)₂]. The newly synthesized complex was characterized by elemental analyses, molecular weight measurement, FT-IR and NMR (¹H and ¹³C) spectral studies. Spectral studies of the modified complex suggest the presence of bi-dentate mode of attachment of Schiff's base in the solution state. Sol-gel transformations of [{(H₅C₆)N?=?CH-C₆H₄O}Ga(OPrⁱ)₂] in organic medium, yielded γ-Ga₂O₃(b), as found by XRD studies. TEM image of the sample (a) revealed the formation of nano-rods of oxide with average diameter of ~100?nm whereas the TEM image of sample (b) showed presence of nano-sized particles of oxide with average particle size of 10?nm. Morphological and compositional studies of synthesized samples (a) and (b) were carried out using SEM and EDX. The method provides a possibility of large scale synthesis of dissimilar shaped and pure Ga₂O₃ nanoparticles.     

High quality gate dielectrics formed by rapid thermal chemical vapor deposition of silane and nitrous oxide

In the present study, we have performed electrical characterization of oxides deposited via rapid thermal chemical vapor deposition using SiH₄ and N₂O. We have investigated the effect of temperature, pressure, and SiH₄ to N₂O ratio on the electrical and material properties of as-deposited films. We have found that as-deposited oxides deposited at low temperatures, low pressures, and with a low silane to nitrous oxide ratio of ～0.5% give good material and electrical properties. The as-deposited films are stoichiometric in nature and have high deposition rates. As-deposited films had very low D_it values, high breakdown fields, and excellent subthreshold swing. The leakage currents and metal oxide semiconductor field effect transistor current drive, although lower than thermal oxides, were found to be quite acceptable. We have also investigated the thickness dependence of the films and found that as the film thickness is reduced below 50Å, the reliability improves for all oxides including the silicon-rich deposited oxides.     

Energy use in the rural areas of India: setting up a rural energy data base

Aggregating and forecasting demand are crucial parts of energy planning. While a large number of energy consumption surveys have been conducted in the past in the rural energy sector of India, the lack of sufficient data and its compilation, coupled with doubt about the quality of data, has made the task extremely difficult. This paper summarizes our recent effort to compile, computerize and analyze data from 638 village energy consumption surveys covering over 39,000 households, carried out by different organisations between 1985 and 1989. The details of the level of information provided in the survey reports, area of survey, land use pattern, asset ownership, etc., of the collated studies are presented. Results based on the analysis of the energy consumption data compiled are then discussed. The national average for rural domestic thermal energy consumption (excluding water and space heating) estimated through this work (629 kcal or 2.63 MJ per capita daily) is much similar to the rural domestic thermal energy requirement assumed in most energy planning exercises in India in the past. The useful thermal energy consumption varies from 325 to 1065 kcal/cap/d (1.36-4.46 MJ/cap/d) in the East Coast Plain and Hills and the Eastern Himalayan Regions, respectively. Reconfirming the predominance of firewood, the data reveals that the contribution of firewood to the domestic thermal energy consumption has remained at about 58% over the last three decades; dungcake and agricultural residues contribute almost equally in the remaining share. At the national level, our estimates indicate that at least 180 million tonnes of firewood, 40 million tonnes of dungcakes and 30 million tonnes of agricultural residues were consumed in the rural sector for meeting the domestic thermal energy requirement in 1991. The paper also compares the estimates with those based on other surveys in India.     

Numerical Simulation of Anisotropic Shrinkage in a 2D Compact of Elongated Particles

Microstructural evolution during simple solid-state sintering of two-dimensional compacts of elongated particles packed in different arrangements was simulated using a kinetic, Monte Carlo model. The model used simulates curvature-driven grain growth, pore migration by surface diffusion, vacancy formation, diffusion along grain boundaries, and annihilation. Only the shape of the particles was anisotropic; all other extensive thermodynamic and kinetic properties such as surface energies and diffusivities were isotropic. We verified our model by simulating sintering in the analytically tractable cases of simple-packed and close-packed, elongated particles and comparing the shrinkage rate anisotropies with those predicted analytically. Once our model was verified, we used it to simulate sintering in a powder compact of aligned, elongated particles of arbitrary size and shape to gain an understanding of differential shrinkage. Anisotropic shrinkage occurred in all compacts with aligned, elongated particles. However, the direction of higher shrinkage was in some cases along the direction of elongation and in other cases in the perpendicular direction, depending on the details of the powder compact. In compacts of simple-packed, mono-sized, elongated particles, shrinkage was higher in the direction of elongation. In compacts of close-packed, mono-sized, elongated particles and of elongated particles with a size and shape distribution, the shrinkage was lower in the direction of elongation. The results of these simulations are analyzed, and the implication of these results is discussed.     

Short- and long-term components of working memory in the rat.

In Experiment 1 of this report, we examined the neuropharmacological nature of short-term working memory of rats trained to retrieve food from all arms of a 12-arm radial maze. Delay intervals of varying length were placed between Choices 6 and 7. Lanthanum (LaCl?) and glutamate (GLU) injected bilaterally into the hippocampus effectively impaired retention over short delay intervals, which suggests a possible role for calcium and/or potassium and for glutamate in working memory. However, another equally likely explanation for the amnesic effects of LaCl? and GLU is that these drugs impaired reference memory. To test more directly the hypothesis that LaCl?, GLU, or ANI might differentially affect working and reference memory, we tested the effects of these drugs on performance of rats trained to retrieve food from only 8 arms of the 12-arm maze in Experiment 2. The remaining 4 arms were never baited, in order to test reference memory function. We predicted that rats would make errors only in baited arms (i.e., errors of working memory). Instead, results of Experiment 2 showed that LaCl?, GLU, or ANI injection produced errors in unbaited arms even before a 120-min delay. If rats were injected with LaCl? or GLU, baited-arm errors were observed only after the delay period. No impairment of performance on baited arms were observed after injection of ANI. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Antimutagenicity of polyphenol-rich fractions from sorghum bicolor grain

Polyphenols extracted from a bird-resistant sorghum (Sorghum bicolor (L) Moench) grain cultivar SSK30 were separated into three crude fractions: non-tannin polyphenols with small M_r (F₁); proanthocyanidins with M_r values between 2000 and 10000 (F₂); and proanthocyanidins with much larger M_r values of around 10000-50000 (F₃). Each fraction was tested for mutagenicity using mutants of Salmonella typhimurium (the Ames test) or the somatic mutation and recombination test (SMART) employing Drosophilu melanogaster. None of the fractions was positive with either test. On the other hand the crude polyphenols all acted as antimutagens when coincubated with mutants of S typhimurium and standard mutagens (sodium azide, daunomycin and 2-aminofluorene). The order of antimutagenicity was F₃> F₂> F₁, a decrease with decreasing M_r. It is possible that a different mechanism of polyphenol antimutagenicity occurs against the mutagen sodium azide when compared with the mutagens daunomycin and 2-aminofluorene.     

Sexual orientation-related differences in prepulse inhibition of the human startle response.

Prepulse inhibition (PPI) refers to a reduction in the startle response to a strong sensory stimulus when this stimulus is preceded by a weaker stimulus--the prepulse. PPI reflects a nonlearned sensorimotor gating mechanism and also shows a robust gender difference, with women exhibiting lower PPI than men. The present study examined the eyeblink startle responses to acoustic stimuli of 59 healthy heterosexual and homosexual men and women. Homosexual women showed significantly masculinized PPI compared with heterosexual women, whereas no difference was observed in PPI between homosexual and heterosexual men. These data provide the first evidence for within-gender differences in basic sensorimotor gating mechanisms and implicate the known neural substrates of PPI in human sexual orientation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)