Distalless expression in crustaceans and the patterning of branched limbs

The ability of two-dimensional echocardiography to detect and to evaluate the extent of wall motion abnormalities is limited by the use of few selected, nonparallel, views of the whole left ventricle. This leads to an incomplete appreciation of the spatial relationships between various cardiac structures and inaccuracy in quantitative data as a result of using of geometric assumptions. Dynamic volume-rendered three-dimensional echocardiography has the ability to overcome the above limitations. In this article we review the use of volume-rendered three-dimensional echocardiography in the diagnosis and assessment of ischemic heart disease, including complications related to myocardial infarction.     

Histomorphometric, physical, and mechanical effects of spaceflight and insulin-like growth factor-I on rat long bones

Pituitary adenylate cyclase activating peptide and vasoactive intestinal peptide belong to the same neuropeptide family. Both peptides are present in nerve fibers in the gastric wall and are thought to be involved in the regulation of inflammatory processes. Experimental ulcers were induced in the rat gastric mucosa by local application of acetic acid. During the healing process we examined the PACAP and VIP innervation by means of immunohistochemistry and in situ hybridization. The ulcer area was examined from day 1 to day 15 after ulcer induction. There was a marked depletion of PACAP in nerve fibers at the ulcer margin from day 1 and onwards. On day 10 and day 15, PACAP-immunoreactive nerve fibers could again be visualized at the ulcer margin. In contrast, VIP immunoreactive nerve fibers were present at the ulcer margin at all time points studied. From day 10 following ulcer induction PACAP- and VIP- immunoreactive nerve fibers were increased in frequency in the smooth muscle beneath the ulcer. An upregulation of VIP and PACAP mRNA was also demonstrated in the myenteric ganglia adjacent to ulcer. The present results indicate that neuronal PACAP and VIP react differently to the inflammation at the ulcer margin but similarly in the smooth muscle during the ulcer healing.     

Mutational analysis of the Mu transposase. Contributions of two distinct regions of domain II to recombination

Mu transposase is a member of a protein family that includes many transposases and the retroviral integrases. These recombinases catalyze the DNA cleavage and joining reactions essential for transpositional recombination. Here we demonstrate that, consistent with structural predictions, aspartate 336 of Mu transposase is required for catalysis of both DNA cleavage and DNA joining. This residue, although located 55 rather than 35 residues NH2-terminal of the essential glutamate, is undoubtedly the analog of the second aspartate of the Asp-Asp-35-Glu motif found in other family members. The core domain of Mu transposase consists of two subdomains: the NH2-terminal subdomain (IIA) contains the conserved Asp-Asp-Glu motif residues, whereas the smaller COOH-terminal subdomain (IIB) contains a large positively charged region exposed on its surface. To probe the function of domain IIB, we constructed mutant proteins carrying deletion or substitution mutations within this region. The activity of the deletion proteins revealed that domains IIA and IIB can be provided by different subunits in the transposase tetramer. Substitution mutations at two pairs of exposed lysine residues within the positively charged surface of domain IIB render transposase defective in transposition at a reaction step after DNA cleavage but prior to DNA joining. The severity of this defect depends on the structure of the DNA flanking the cleavage site. Thus, these data suggest that domain IIB is involved in manipulating the DNA near the cleavage site and that this function is important during the transition between the DNA cleavage and the DNA joining steps of recombination.     

Correlation and prediction of dense fluid transport coefficients. I. n-alkanes

Recent accurate measurements of the self-diffusion coefficient for n-hexadecane and n-octane and of the viscosity coefficient for n-heptane, n-nonane, and n-undecane over wide pressure ranges have been used to provide a critical test of a previously described method, based on consideration of hard-sphere theory, for the correlation of transport coefficient data. It is found that changes are required to the universal curve for the reduced viscosity coefficient as a function of reduced volume and, also, to the parameters R _D, R , and R which were introduced to account for effects of nonspherical molecular shape. The scheme now accounts most satisfactorily for the self-diffusion, viscosity, and thermal conductivity coefficient data for all n-alkanes from methane to hexadecane at densities greater than the critical density.     

Structural evolution in gel-derived mullite precursors

The evolution of mullite from organo-metal gel precursors above 700 °C is found to be strongly influenced in both gel pieces and powdered samples by the thermal pretreatment at lower temperatures. Under the present conditions, the optimum preheating temperature was found to be 350 °C, at which temperature an anomalously high concentration was found of an Al species with a characteristic ²⁷Al magic-angle spinning NMR resonance at about 30 ppm. Such Al sites are often described as pentaco-ordinated, but an alternative assignment is considered. The optimum temperature for the formation of this Al site is also optimal for the catalytic formation of aromatic molecules from the residual organic fragments and/or solvent present. Mass spectrometry shows that under the present reaction conditions, these aromatics are thermally stable up to at least 900 °C in air, and the prolonged presence of their decomposition products (CO and water) could facilitate the transformation of the gel to crystalline mullite. The ²⁹Si NMR spectra indicate at least three different Si environments, including one which may arise from the formation of silicon oxycarbide glasses in these gels.     

The distribution and phylogenetic significance of desmethylsterols inChenopodium andAtriplex: Coexistence of Δ7- and Δ5 -sterols

Twenty-one species in the Chenopodiaceae were analyzed for sterol composition. In ten of eleven species ofChenopodium, the major desmethylsterols were Δ⁷-sterols accompanied by lower proportions of Δ⁵-sterols. InC. fremontii this pattern was reversed. The sterol profiles of five species ofAtriplex were characterized by the coexistence of Δ⁷- and Δ⁵-sterols in ratios of 0.3∶1 to 0.4∶1. MaleAtriplex plants contained higher proportions of Δ⁵-sterols than femaleAtriplex plants. OneCeratoides and twoSalicornia species contained Δ⁵-sterols as their predominant sterols.     

Quantitative Characterization of Indentation Crack Path in a Cubic Zirconia-10 vol% Alumina Composite

Stereological measurements were performed to characterize the indentation crack path in a cubic zirconia-10 vol% alumina (c-ZrO₂-10 vol% Al₂O₃) composite. Cracks were generated using Vickers indentation, and the crack propagation behavior was characterized as a function of the indentation loading/unloading rates. Cracks that were produced by Vickers indentation formed at higher crack velocities as the loading/unloading rates increased. The amount of contact between the crack and the Al₂O₃ particles increased as the indentation rate decreased. The total number of crack-particle interactions per unit crack length also increased as the indentation rate decreased, because of an increase in the number of particles that were fractured per unit crack length, whereas the number of particles that were debonded remained relatively constant as the indentation rate changed. These results suggest that residual thermal mismatch stresses have predominant control of the crack path at lower crack velocities (low indentation loading/unloading rate), whereas elastic mismatch stresses predominate at higher crack velocities (high indentation loading/unloading rate).     

Analysis of polymer blend morphology by transmission and reflection light scattering techniques

Optical inspection is a potentially powerful and practical tool to collect information on polymer blend morphology for on-line quality and process control. This paper describes two approaches for the characterization of polymer blend materials by multiple light scattering. A quantitative evaluation of spectral turbidimetry (scattering of transmitted light) is presented and an adaptation of this technique for monitoring particle size, independent of the volume fraction is demonstrated. Such a procedure is applicable to materials in film form. A different approach is presented for the analysis of nearly spherical particles in optically thick samples: the diffuse reflection pattern surrounding the position of incidence of a focused light beam on the surface of the turbid medium is scanned by a single side imaging system. A spectral pseudo-transmittance signal processing technique provides particle size information again independent of the volume fraction: Both techniques have been tested using well characterized polystyrene microspheres suspended in water as well as poly(methyl) (methacrylate)/polystyrene polymer blends.     

Debinding injection molded materials by melt wicking

For metal and ceramic injection molding procedures which use wax binders in the production of powder-based parts, melt wicking is commonly employed to debind the components prior to sintering. Because debinding is often a time-consuming procedure, the influence of such process variables as powder size, part height, green density and temperature have been investigated to reduce the amount of time required for debinding by melt wicking.     

黄河内蒙古段干流沉积物中砷含量及形态研究

为探明黄河内蒙古段沉积物中砷含量及形态分布特征,采集黄河内蒙古段干流柱状沉积物,采用HNO4-H2SO4-HCl O4法消解沉积物样品,提取沉积物中吸附型砷(A-As)、铝型砷(Al-As)、铁型砷(Fe-As)、钙型砷(CaAs)、包蔽型砷(O-As)5种形态砷,并采用氢化物发生原子荧光分光光度法测定砷含量。结果表明:黄河内蒙古段干流柱状沉积物中砷含量为7.123~16.661 mg/kg,平均为9.292 mg/kg;从整体上看,左岸沉积物砷含量高于右岸,随深度增加砷含量呈下降趋势,从上游至下游砷含量在黑柳子段出现高值;黄河内蒙古段沉积物中砷以Ca-As为主,O-As次之;随着深度的增加,总体上,Ca-As含量略有升高,A-As和O-As含量有所下降,Al-As和Fe-As含量基本不变。