Expression of Main Toll-Like Receptors in Patients with Different Types of Colorectal Polyps and Their Relationship with Gut Microbiota

Abnormal activation of Toll-like receptor (TLRs) signaling can result in colon cancer development. The aim of this study was to investigate the expression of important TLRs in different histological types of colorectal polyps and evaluate their relationship with intestinal microbiota. The expression levels of TLR2, 3, 4, and 5 were analyzed in intestinal biopsy specimens of 21 hyperplastic polyp (HP), 16 sessile serrated adenoma (SSA), 29 tubular adenoma (TA), 21 villous/tubulovillous (VP/TVP) cases, and 31 normal controls. In addition, selected gut bacteria including Streptococcus bovis, Enterococcus faecalis, Enterotoxigenic Bacteroides fragilis (ETBF), Fusobacterium nucleatum, Porphyromonas spp., Lactobacillus spp., Roseburia spp., and Bifidobacterium spp. were quantified in fecal samples using absolute qRT PCR, and, finally, the association between TLRs and these gut microbiota- was evaluated by Spearman’s correlation coefficient. Higher expression of TLR2 and TLR4 in VP/TVP and TA, and lower expression levels of TLR3 and TLR5 in all type of polyps were observed. The differences in TLR expression patterns was not only dependent on the histology, location, size, and dysplasia grade of polyps but also related to the intestinal microbiota patterns. TLR2 and TLR4 expression was directly associated with the F. nucleatum, E. faecalis, S. bovis, Porphyromonas, and inversely to Bifidobacterium, Lactobacillus, and Roseburia quantity. Furthermore, TLR3 and TLR5 expression was directly associated with Bifidobacterium, Roseburia, and Lactobacillus quantity. Our results suggest a possible critical role of TLRs during colorectal polyp progression. An abnormal regulation of TLRs in relation to gut microbial quantity may contribute to carcinogenesis.     

Zinc Oxide/Graphene Oxide as a Robust Active Catalyst for Direct Oxidative Synthesis of Nitriles from Alcohols in Water

Catalysis Letters - In this work, without using any linker or chemical modification of graphene oxide, a zinc oxide immobilized graphene oxide-based catalyst was used for the direct aerobic...     

Thermally exfoliated graphene oxide reinforced fluorinated pentablock poly(l‐lactide‐co‐ε‐caprolactone) electrospun scaffolds: Insight into antimicrobial activity and biodegradation

Three‐dimensional fluorinated pentablock poly(l ‐lactide‐co‐ε‐caprolactone)‐based scaffolds were successfully produced by the incorporation of thermally exfoliated graphene oxide (TEGO) as an antimicrobial agent with an electrospinning technique. In a ring‐opening polymerization, the fluorinated groups in the middle of polymer backbone were attached with a perfluorinated reactive stabilizer having oxygen‐carrying ability. The fiber diameter and its morphologies were optimized through changes in TEGO amount, voltage, polymer concentration, and solvent type to obtain an ideal scaffold structure. Instead of the widely used graphene oxide synthesized by Hummer's method, TEGO sheets having a low amount of oxygen produced by thermal expansion were integrated into the fiber structure to investigate the effect of the oxygen functional groups of TEGO sheets on the degradation and antimicrobial activity of the scaffolds. There was no antimicrobial activity in TEGO‐reinforced scaffolds in the in vitro tests in contrast to the literature. This study confirmed that a low number of oxygen functional groups on the surface of TEGO restricted the antimicrobial activity of the fabricated composite scaffolds. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43490.     

Study on the performance of Cd2+ sorption using dimethylethylenediamine-modified zinc-based MOF (ZIF-8-mmen): optimization of the process by RSM technique

ABSTRACT

Cadmium as a highly toxic metal is released into the environment through paper production, metal processing, phosphate fertilizers, insecticides, and treatment of wastewater. Cadmium also inhibits the body activities and is very toxic for kidney and other organisms. In the current study, zinc-based metal–organic framework, zeolitic imidazolate framework (ZIF)-8, was synthesized and modified by dimethylethylenediamine (ZIF-8-mmen) for the removal of cadmium. To optimize the experiments, response surface methodology was applied with three variables including pH, adsorbent dosage, and contact time using central composite design. The optimum conditions for pH, dosage, and time were 2, 0.1 g, and 89 min, respectively, with removal efficiency of 85.38%. The Langmuir isotherm (q _m = 1000 mg/g) indicates the monolayer adsorption. The kinetic studies reveal that the Lagergren model was predominant and cadmium was not chemisorbed. Thermodynamic parameters show spontaneous, endothermic, and physisorption processes.     

Growing Innovative Calcium Carbonate Morphologies by Utilizing the Colloidal Gas Aphron System as a Surfactant-Based Template Method

Many studies have been conducted to study the various polymorphs and morphologies of calcium carbonate crystals in nature and living organisms. In this experimental work, a novel method has been employed to crystallize calcium carbonate by using colloidal gas aphron dispersion. The polymorph and morphology of prepared particles were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectrometry techniques. SEM and XRD analyses demonstrated that the morphology of synthesized CaCO₃ can be changed from spherical (vaterite phase) to novel rod and plate-like shapes (mixture of vaterite and calcite phases) with changes in the surfactant concentration. The quantitative examination results of different calcium carbonate polymorph orientations showed that the precursor concentrations had no significant effect on the orientation of calcite phase, but rather they affected the orientation development of vaterite phase at a higher surfactant concentration.     

Dye binary mixture formulation by means of derivative ratio spectra of the Kubelka–Munk function

In this study, a new method is introduced for the determination of dye concentration in fabrics dyed with bicomponent dye mixtures. The reflectance spectra of the samples dyed with different binary mixtures of dyes were recorded between 400 and 700 nm. The obtained spectra were divided by a standard spectrum of each of the components in the mixtures and the derivative spectra were calculated. The amounts of dyes were determined by measurements in suitably selected wavelengths in the acquired derivative ratio spectra. The obtained results indicate that the developed derivative ratio spectra method is more accurate than the normal Kubelka–Munk method. The proposed derivative method is simple, accurate, and suitable for quantitative analysis of samples dyed with binary mixed shades. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010     

Investigation of the effect of magnetic field on mass transfer parameters of CO2 absorption using Fe3O4‐water nanofluid

In this study, the enhancement of physical absorption of carbon dioxide by Fe₃O₄‐water nanofluid under the influence of AC and DC magnetic fields was investigated. Furthermore, a gas‐liquid mass transfer model for single bubble systems was applied to predict mass transfer parameters. The coated Fe₃O₄ nanoparticles were prepared using co‐percipitation method. The results from characterization indicated that the nanoparticles surfaces were covered with hydroxyl groups and nanoparticles diameter were 10–13 nm. The findings showed that the mass transfer rate and solubility of carbon dioxide in magnetic nanofluid increased with an increase in the magnetic field strength. Results indicated that the enhancement of carbon dioxide solubility and average molar flux gas into liquid phase, particularly in the case of AC magnetic field. Moreover, results demonstrated that mass diffusivity of CO₂ in nanofluid and renewal surface factor increased when the intensity of the field increased and consequently diffusion layer thickness decreased. © 2016 American Institute of Chemical Engineers AIChE J, 63: 2176–2186, 2017     

Kinetic Monte Carlo simulation for homogeneous nucleation of metal nanoparticles during vapor phase synthesis

We present a free‐energy driven kinetic Monte Carlo model to simulate homogeneous nucleation of metal nanoparticles (NPs) from vapor phase. The model accounts for monomer‐cluster condensations, cluster–cluster collisions, and cluster evaporations simultaneously. Specifically, we investigate the homogeneous nucleation of Al NPs starting with different initial background temperatures. Our results indicate good agreement with earlier phenomenological studies using the Gibbs# free energy formulation from Classical Nucleation Theory (CNT). Furthermore, nucleation rates for various clusters are calculated through direct cluster observations. The steady‐state nucleation rate estimated using two different approaches namely, the Yasuoka‐Matsumoto (YM) and mean first passage time (MFPT) methods indicate excellent agreement with each other. Finally, our simulation results depict the expected increase in the entropy of mixing as clusters approach the nucleation barrier, followed by its subsequent drastic loss after the critical cluster formation resulting from first‐order phase transitions. © 2017 American Institute of Chemical Engineers AIChE J, 63: 18–28, 2018     

Biodegradable polypropylene/thermoplastic starch nanocomposites incorporating halloysite nanotubes

In this work, polypropylene/thermoplastic starch (PP/TPS) with and without halloysite nanotubes (HNTs) was prepared via melt mixing in order to obtain environmentally friendly plastics. PP‐grafted maleic anhydride (PP‐g‐MA) was used to improve the compatibility among the highly incompatible polymers. The mechanical characterization showed a reduction in the tensile properties of the polymer when TPS increased; however, HNT successfully compensated for some of the observed losses. The results from the thermogravimetric analysis (TGA) indicated that HNT is an efficient reinforcement for the thermal stability improvement. TPS caused an increase in the storage modulus (G′) and the complex viscosity (η*) which marks a change in the viscoelastic properties of the system. The scanning electron microscope (SEM) images showed the effective plasticization of starch and better dispersion of TPS in the presence of HNT. Some samples were also buried in the soil to measure their sustainability after their lifetime lapse. The results indicated that TPS improves the biodegradability of the PP/TPS system. PP considerably lowered the moisture uptake of TPS; nevertheless, HNT caused a slight increase in the moisture absorption. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45740.     

Synthesis of modified catalyst and stabilization of CuO/NH4‐ZSM‐5 for conversion of methanol to gasoline

In this article, the catalytic conversion of methanol to gasoline range hydrocarbons has been studied over CuO/ NH₄‐ZSM‐5(3,5,7,9%) catalysts prepared via sono‐chemistry methods. In order to improve, copper oxide can be used as a booster on NH₄‐ZSM‐5 this catalyst property. Accordingly, the conversion process of Methanol to Gasoline (MTG) was conducted under a pressure of 1 atm and temperature of 400°C by a fixed‐bed reactor on copper oxide catalysts which were prepared based on synthetic NH₄‐ZSM‐5. The synthetic catalyst was investigated by such analyses as BET, XRD, FT‐IR, and SEM. Formation of copper oxide phase and proper distribution of copper oxide were proven on the basic level of using XRD analysis. BET analysis showed the reduction in catalyst level and SEM images depicted the proper distribution of particles. The present investigation is to study the effect of CuO loading on NH4‐ZSM‐5 support for conversion of methanol to gasoline range hydrocarbons. A series of CuO/ NH4‐ZSM‐5 catalysts were prepared, characterized, and experimented for their performance on methanol conversion and hydrocarbon yield.