Wear and biological activity of highly crosslinked polyethylene in the hip under low serum protein concentrations

Crosslinked ultra-high molecular weight polyethylene (UHMWPE) has been developed and introduced into clinical practice in order to reduce wear in the hip. Zero wear of highly crosslinked UHMWPE in vitro has been reported by some groups using lubricants with high concentrations of serum proteins in hip simulators. In contrast, some clinical studies have reported finite wear rates. The aim of this study was to compare the wear rates, wear surfaces, and wear debris produced by UHMWPE with different levels of crosslinking in a hip joint simulator, with lower, more physiologically relevant concentrations of protein in the lubricant. The UHMWPEs were tested in the Leeds ProSim hip joint simulator against cobalt-chromium (CoCr) femoral heads. The wear particles were isolated and imaged using a field emission gun scanning electron microscope (FEGSEM) at high resolution. The highly crosslinked UHMWPEs had significantly lower wear volumes than the non-crosslinked UHMWPEs. No significant difference was found in the percentage number and percentage volume of the particles in different size ranges from any of the materials. They had similar values of specific biological activity. The functional biological activity (FBA), which takes into account the wear volume and specific biological activity, showed that the highly crosslinked UHMWPEs had lower FBAs due to their lower wear volume.     

Application of polymerase chain reaction for the correlation of Salmonella serovars recovered from greyhound feces with their diet

The polymerase chain reaction was employed to correlate Salmonella serovars isolated from fecal material of greyhounds suffering from gastroenteritis with those isolated from the diet fed to the greyhounds prior to onset of diarrhea. Kennels around the Abilene, Kansas, area were contacted and supplied with materials needed to collect a portion of the diet each day. With the onset of diarrhea, the kennels were instructed to ship the fecal material and diet from the previous 10 days to the laboratory for testing. Forty-one fecal samples and corresponding diets were screened for Salmonella, Clostridium perfringens, Campylobacter jejuni, Staphylococcus aureus, Staphylococcus intermedius, and pathogenic (piliated) Escherichia coli by direct culture using standard procedures. The fecal material was also screened for coronavirus and parvovirus using electron microscopy. Thirty-five "normal" fecal samples were screened for all of the above mentioned microorganisms as a control. In addition, the fecal material was screened for E. coli verotoxins I and II and clostridial enterotoxins. A total of 61 Salmonella isolates were recovered from the 41 samples of feces and diet submitted for testing; 31 were recovered from the feces and 30 from the diet. Four Salmonella isolates were recovered from the normal fecal samples. Results obtained by PCR, plasmid profiles, antigenic analysis, and antibiogram profiles indicated that 16 of the 31 isolates recovered from the fecal material were the same strain as that recovered from the diet.     

Low velocity impact of combination Kevlar/carbon fiber sandwich composites

Impact, compression after impact, and tensile stiffness properties of carbon fiber and Kevlar combination sandwich composites were investigated in this study. The different samples consisted of impact-side facesheets having different combinations of carbon fiber/Kevlar and carbon fiber/hybrid. The bottom facesheets remained entirely carbon fiber to maintain the high overall flexural stiffness of the sandwich composite. The focus of this research was to determine if any improvement in impact properties existed as a result of replacing the impact-side facesheet layers of carbon fiber with Kevlar or hybrid. Impact tests were conducted on different sample types to obtain information about absorbed energy and maximum impact force. Also, compression after impact tests were conducted to determine the reduction in compressive strength when comparing impacted to non-impacted samples. The elastic moduli of carbon fiber, Kevlar, and hybrid were determined from tensile testing. This data was used to characterize the reduction in stiffness from replacing carbon fiber layers with the Kevlar or hybrid layers. The experimental data in its entirety helps define the benefits and disadvantages of replacing carbon fiber layers with Kevlar or hybrid.     

Annealing Dependence of Exchange Bias in MnO/Ga<Subscript>1−</Subscript><Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>As Heterostructures

We discuss the annealing-dependence of exchange bias in Ga_{1− x} Mn _x As epilayers that are overgrown with Mn. Although pure Mn is a known antiferromagnet, we find that the as-grown Mn overlayer does not produce any exchange coupling with Ga_{1− x} Mn _x As. Rather, our studies indicate that annealing in air is essential for creating the standard signatures of exchange bias (a clear shift in the magnetization hysteresis loop and an increased coercive field). We use X-ray photoelectron spectroscopy to characterize the compositional depth profile of both as-grown and rapid thermal annealed samples. These studies demonstrate that the cleanest exchange bias arises when the Mn overlayer is completely converted into MnO.     

Agents and markets

Autonomous agents are intelligent software programs. Typically, agents are situated in an environment. Repeatedly, they sense their environment, engage in some decision making whereby they select actions, and execute their actions, which, in turn, impact their environment. Moreover, in most cases, the environment contains a number of such agents whose actions typically mutually affect one another. This interdependence arises because the different agents, with their own aims and objectives, must operate in a common environment that has finite resources and capabilities. Depending on the dependency's nature, several different types of social interaction occur between the agents, including cooperation, coordination, and negotiation. Autonomous agents are becoming active participants in marketplaces. We present a study on the interactions between autonomous agents and markets.     

Electron-Impact Cross Sections for Ground State to np Excitations of Sodium and Potassium

Cross sections for electron impact excitation of atoms are important for modeling of low temperature plasmas and gases. While there are many experimental and theoretical results for excitation to the first excited states, little information is available for excitation to higher states. We present here calculations of excitations from the ground state to the np levels of sodium (n = 3 through 11) and potassium (n = 4 through 12). We also present a calculation for a transition from the excited sodium level 3p to 3d to show the generality of the method. Scaling formulas developed earlier by Kim [Phys. Rev. A 64, 032713 (2001)] for plane-wave Born cross sections are used. These formulas have been shown to be remarkably accurate yet simple to use. We have used a core polarization potential in a Dirac-Fock wave function code to calculate target atom wave functions and a matching form of the dipole transition operator to calculate oscillator strengths and Born cross sections. The scaled Born results here for excitation to the first excited levels are in very good agreement with experimental and other theoretical data, and the results for excitation to the next few levels are in satisfactory agreement with the limited data available. The present results for excitation to the higher levels are believed to be the only data available.     

Uncertainties in Small-Angle Measurement Systems Used to Calibrate Angle Artifacts

We have studied a number of effects that can give rise to errors in small-angle measurement systems when they are used to calibrate artifacts such as optical polygons. Of these sources of uncertainty, the most difficult to quantify are errors associated with the measurement of imperfect, non-flat faces of the artifact, causing the instrument to misinterpret the average orientation of the surface. In an attempt to shed some light on these errors, we have compared autocollimator measurements to angle measurements made with a Fizeau phase-shifting interferometer. These two instruments have very different operating principles and implement different definitions of the orientation of a surface, but (surprisingly) we have not yet seen any clear differences between results obtained with the autocollimator and with the interferometer. The interferometer is in some respects an attractive alternative to an autocollimator for small-angle measurement; it implements an unambiguous and robust definition of surface orientation in terms of the tilt of a best-fit plane, and it is easier to quantify likely errors of the interferometer measurements than to evaluate autocollimator uncertainty.     

Phototoxicity and fluorotoxicity combine to alter the behavior of neutrophils in fluorescence microscopy based flow adhesion assays

The use of fluorescent probes that allow visualization of leukocyte-endothelial cell (EC) interactions has greatly informed our understanding of leukocyte recruitment. However, effects of these agents on the biological functions of leukocytes are poorly described, leading to concerns about the interpretation of such data. Here we used two flow-based neutrophil adhesion assays to compare the effects of phase contrast illumination (PCI) with high intensity illumination (HII) used for fluorescent microscopy, in the presence or absence of five commonly used fluorochromes. Isolated neutrophils were either (1) perfused across P-selectin to establish a population of rolling cells, which were subsequently activated with fMLP; or (2) perfused across EC activated with TNF-alpha. In the absence of fluorescent dyes, HII did not affect levels of leukocyte adhesion; however, subsequent neutrophil behavior was dramatically altered when compared with cells under PCI, for example, dramatically reducing their migration velocities. In the presence of fluorescent dyes, the effects of HII were exacerbated, although the precise nature of the biological effects of these probes was agent specific. Thus, for the first time, our experiments describe the effects of fluorescent microscopy on the separate stages of the neutrophil recruitment process and reveal a previously unsuspected effect of HII on neutrophil migration.     

High precision in-cylinder gas thermometry using Laser Induced Gratings: Quantitative measurement of evaporative cooling with gasoline/alcohol blends in a GDI optical engine

The first application of Laser Induced Thermal Gratings Spectroscopy (LITGS) for precision thermometry in a firing GDI optical engine is reported. Crank-angle resolved temperature values were derived from LITGS signals generated in fuel vapour with a pressure dependent precision in the range 0.1–1.0% allowing differences in evaporative or charge cooling effects arising from a variety of ethanol and methanol blends with a model gasoline fuel to be quantified. In addition, fluctuations in temperature arising from cyclic variations in compression were directly detected and measured.