In-service evaluation of motor and generator stator windings usingpartial discharge tests

Partial discharges (corona) are a symptom of most types of deterioration of motor and generator stator windings rated 4 kV and above. Experience indicates that partial discharges occur years before failure. This leaves sufficient time to plan corrective maintenance to avoid the in-service failure of the motor or generator. This paper describes a new type of partial discharge test which can be performed by plant personnel during normal operation of the machine, thus enabling all users of large machines to plan maintenance. The key requirement of the new test is to remove all the interference caused by other sparking and discharging sources in a plant. Such noise has lead to false indications of stator winding deterioration in the past. The new test uses either high-voltage capacitive sensors, high-frequency current transformers, or 1000 MHz electromagnetic couplers to detect the discharge signals. These signals are processed on a pulse-by-pulse basis by a specialized electronic instrument to remove noise and the remaining partial discharges are then categorized according to number, magnitude, and phase position. The test has been implemented on over 100 machines, and the results appear promising     

Reduction of the pesticides oxamyl and methomyl by FeII: effect of pH and inorganic ligands

This work examines the effect that pH and selected inorganic ligands have on the kinetics of reactions between FeII and two structurally related oxime carbamate pesticides, oxamyl and methomyl. In anoxic solutions containing FeII, these compounds degrade by parallel elimination and reduction pathways. Rates of FeII-independent carbamate elimination (EIcb mechanism) are proportional to [OH-], increasing 10-fold for each unit increase in pH. In homogeneous solution, rates of carbamate reduction by 0.5 mM FeII are relatively constant at pH <7, but increase dramatically between pH 7 and pH 8.3. At pH >8.3, Fe(OH)2(s) precipitation occurs, and carbamates react with both solution-phase and solid-phase FeII. Carbamate reduction by FeII is not significantly affected by the presence of chloride, bromide, nitrate, perchlorate, and sulfate. In contrast, increased rates of carbamate reduction are observed in solutions containing fluoride, carbonate, and phosphate. Kinetic measurements are interpreted in terms of changing FeII speciation according to the expression kred = [FeII]sigmaikialphai, where k(red) is the pseudo-first-order rate constant for carbamate reduction, [FeII] is the total FeII concentration, and ki and alphai are the second-order rate constant and fractional concentration of each FeII species, respectively. It follows that the overall kinetics of carbamate reduction is a function of the identity and concentration of individual FeII species present in solution as well as the inherent reactivity of each species with carbamates. The magnitude of ki is related to the standard one-electron reduction potential (E(H) degrees) of the corresponding FeIII/FeII redox couple.     

Biomimetic synthesis and patterning of silver nanoparticles

The creation of nanoscale materials for advanced structures has led to a growing interest in the area of biomineralization. Numerous microorganisms are capable of synthesizing inorganic-based structures. For example, diatoms use amorphous silica as a structural material, bacteria synthesize magnetite (Fe3O4) particles and form silver nanoparticles, and yeast cells synthesize cadmium sulphide nanoparticles. The process of biomineralization and assembly of nanostructured inorganic components into hierarchical structures has led to the development of a variety of approaches that mimic the recognition and nucleation capabilities found in biomolecules for inorganic material synthesis. In this report, we describe the in vitro biosynthesis of silver nanoparticles using silver-binding peptides identified from a combinatorial phage display peptide library.     

Silica-precipitating peptides isolated from a combinatorial phage display peptide library

Many biological organisms contain specialized structures composed of inorganic materials. Cellular processes in vivo facilitate the organized assembly of mineral building blocks into complex structures. The structural hierarchy and complexity across a range of length scales are providing new ideas and concepts for materials chemistry. Proteins that direct biomineralization can be used to control the production of nanostructured materials and facilitate the fabrication of new structures. Here, we demonstrate that some of the silica-binding peptides isolated from a combinatorial phage peptide display library can be used in precipitating silica from a solution of silicic acid. The results described in this report demonstrate that peptides displayed by phages act as templates in inorganic material synthesis and provide a means of understanding how some of the biological systems may be carrying out materials chemistry in vivo.     

Investigation of wear of knee prostheses in a new displacement/force-controlled simulator

The performance of two knee simulators designed by ProSim (Manchester, UK) was evaluated by comparison of the wear seen in the press-fit condylar (PFC) Sigma (DePuy) knee prosthesis. Twelve specimens of the same design and manufacturing specification, were subjected to a wear test of 2 x 10(6) cycles duration using bovine serum as a lubricant. The anterior/posterior displacement and internal/external rotation inputs were based on the kinematics of the natural knee. International Standards Organization (ISO) standards were used for the flexion and axial load. The wear rates and wear scar areas were compared across all stations. The mean wear rates found were 17.6+/-5 mm3/10(6) cycles for stations 1 to 6 and 19.6+/-4 mm3/10(6) cycles for stations 7 to 12, resulting in an overall mean wear rate of 18.1+/-3 mm3/10(6) cycles. The differences between the two simulators were not significant. The average wear scar area seen on inserts from stations I to 6 was calculated at 32.4+/-1 per cent of the intended articulating surface. Similarly on stations 7 to 12 the average wear scar area was 30.7+/-3 per cent. The wear scars seen were a good physiological representation of those found from clinical explant data. This study has shown good repeatability from the simulator, both within and between the simulators.     

Coupling high-pressure MALDI with ion mobility/orthogonal time-of-flight mass spectrometry

A new ion mobility/time-of-flight mass spectrometer employing a high-pressure MALDI source has been designed and tested. The prototype instrument operates at a source/drift cell pressure of 1-10 Torr helium, resulting in a mobility resolution of approximately 25. A small time-of-flight mass spectrometer (20 cm) with a mass resolution of up to 200 has been attached to the drift cell to identify (in terms of mass-to-charge ratio) the separated ions. A simple tripeptide mixture has been separated in the drift tube and mass identified as singly protonated species. The ability to separate peptide mixtures, e.g., tryptic digest of a protein, is illustrated and compared to results obtained on a high-vacuum time-of-flight instrument.     

Cost-based tolerancing of optical systems

When designing an optical system it is generally accepted that it is too costly to generate the entire Hessian for every iteration of an optimizer. However, the Hessian also is useful in tolerance analysis for which it needs to be calculated only once. We propose using the Hessian as part of a cost-based tolerancing procedure. Considerations for the general implementation of the proposed ideas are discussed, and the utility of this approach is demonstrated by way of an example. In the example optimal manufacturing tolerances are determined for a doublet. As expected, the optimal tolerances change as quantities such as the requisite image quality for finished systems, manufacturing yields, and relative expenses of meeting given tolerances are varied.     

Imaging with three spherical mirrors

Unobstructed, plane-symmetric systems of three spherical mirrors are investigated. Twelve parameters are necessary to specify the configuration of such a system. Constraints are determined to eliminate four of these parameters as independent degrees of freedom. These constraints ensure appropriate first-order behavior and are used to aid in two example design studies-one for a class of systems with the object at infinity and another for a class of finite conjugate projection systems. For the first study, a portion of the associated merit-function space is systematically evaluated and plotted, and the results are compared with those obtained when a global optimizer is used. For the second study, a global optimizer is employed as the primary search tool. Example systems from both studies are presented.     

Pd nanoparticle enhanced re-oxidation of non-stoichiometric TiO2: STM imaging of spillover and a new form of SMSI

We have used STM imaging in situ to demonstrate two fundamental steps in catalytic processes on model catalysts at elevated temperature. We show that Pd nanoparticles on sub-stoichiometric TiO₂(110) dissociatively adsorb O₂ at 673 K which spills over onto the support where further reaction takes place. The spillover oxygen re-oxidises the surface by removing Tiⁿ⁺ interstitial ions trapped in the crystal lattice, preferentially re-growing TiO₂ around and over the particles. The identification of the metal enhanced re-oxidation mechanism may have important and general consequences for the understanding of catalysis and gas sensing.