Imaging of hippocampal and neocortical neural activity following intravenous cocaine administration in freely behaving cats

We examined spatial-temporal patterns of neural activity, as inferred from 700 nm light reflectance, from the dorsal hippocampus and surrounding neocortex in seven freely behaving cats following 1.5, 2.5, 3.5 and 5.0 mg/kg intravenous cocaine administration. Images were acquired using a new technique which gathered reflected light from cortical and subcortical structures. Cardiac and respiratory patterning, collected simultaneously with optical images, revealed increased rates and diminished variation after intravenous cocaine administration. Cocaine increased reflectance correlates of hippocampal neural activity in a dose-dependent fashion over a 120 min period, with a lengthening time-to-peak effect (22-76 min). The largest dose resulted in an initial decrease, followed by the greatest enhancement in neuronal activity. Correlates of neural activation in the neocortex displayed an inverse dose-response curve to that found in the hippocampus; the time-to-peak effect was shorter (6-43 min) and the maximal change was reduced. Regional patches and bands of activation occurred during the period of the cocaine response, and were more pronounced in the hippocampus than the neocortex. Procaine, administered in a similar dose, slightly increased neural activity for 10 min in both the hippocampus and neocortex, and elicited a small increase in respiration. Cocaine induces a pronounced enhancement of neural activation in the neocortex and dorsal hippocampus; the time course of activation in the hippocampus parallels an increased respiratory pattern and outlasts the neocortical response. We speculate that hippocampal activation may be related to the profound respiratory acceleration found in response to cocaine.     

Indocyanine green: intracellular uptake and phototherapeutic effects in vitro

Indocyanine green (ICG; absorption peak in human plasma 805 nm) was investigated for ICG-mediated phototherapy in vitro. The cellular uptake of ICG (1 microM-50 microM) into HaCaT keratinocytes after an incubation period of 24 h increased up to an intracellular ICG concentration of 12.1 +/- 1.3 nmol per 10(6) cells. To examine dose dependent phototoxic effects in vitro, keratinocytes were incubated with 0 microM-50 microM ICG for 24 h and irradiated by a diode laser (805 nm) with different energy densities (0, 12, 24, 48 J cm-2). All applied ICG concentrations except for 5 microM yielded a cell killing effect in combination with irradiation depending significantly on ICG concentration and light dose. Cell viability for dark control and cells incubated with 50 microM ICG and irradiated with 48 J cm-2 was 0.82 +/- 0.15 and 0.07 +/- 0.02, respectively. Sodium azide (100 mM), a quencher of reactive oxygen species, inhibited significantly the cell killing using 50 microM ICG and 24 J cm-2. Taken together, photoactivation of ICG by irradiation with a diode laser was shown to induce effectively cell killing of HaCaT keratinocytes. Moreover, this effect was inhibited by sodium azide, thus irradiation of ICG might induce a photodynamic reaction.     

Effect of sinus surgery on pulmonary function in patients with cystic fibrosis

The rare case of neurilemmoma of the larynx was presented. The difficulties in histopathologic diagnosis of such tumors were emphasized. The tumor was removed by surgery from external approach.     

Expression and molecular characterization of an enzymatically active recombinant human spumaretrovirus protease

A theoretical model is presented by which a true expression of pregnancy rate resulting from stimulated cycles can be calculated. This includes the transfer of both fresh and cryopreserved embryos. It is concluded that the total reproductive potential of a single cycle of stimulation can only be evaluated by including pregnancies arising from all fresh and frozen embryo transfers resulting from that cycle.     

Genetic mapping of a major susceptibility locus for juvenile myoclonic epilepsy on chromosome 15q

The epilepsies are a group of disorders characterised by recurrent seizures caused by episodes of abnormal neuronal hyperexcitability involving the brain. Up to 60 million people are affected worldwide and genetic factors may contribute to the aetiology in up to 40% of patients. The most common human genetic epilepsies display a complex pattern of inheritance. These are categorised as idiopathic in the absence of detectable structural or metabolic abnormalities. Juvenile myoclonic epilepsy (JME) is a distinctive and common variety of familial idiopathic generalised epilepsy (IGE) with a prevalence of 0.5-1.0 per 1000 and a ratio of sibling risk to population prevalence (lambda(s)) of 42. The molecular genetic basis of these familial idiopathic epilepsies is entirely unknown, but a mutation in the gene CHRNA4, encoding the alpha4 subunit of the neuronal nicotinic acetylcholine receptor (nAChR), was recently identified in a rare Mendelian variety of idiopathic epilepsy. Chromosomal regions harbouring genes for nAChR subunits were therefore tested for linkage to the JME trait in 34 pedigrees. Significant evidence for linkage with heterogeneity was found to polymorphic loci encompassing the region in which the gene encoding the alpha7 subunit of nAChR (CHRNA7) maps on chromosome 15q14 (HLOD = 4.4 at alpha = 0.65; Z(all) = 2.94, P = 0.0005). This major locus contributes to genetic susceptibility to JME in a majority of the families studied.     

Dependence on the motif YIPP for the physical association of Jak2 kinase with the intracellular carboxyl tail of the angiotensin II AT1 receptor

Angiotensin II is the effector molecule of the renin-angiotensin system. Virtually all of its biochemical actions are mediated through a single class of cell-surface receptors called AT1. These receptors contain the structural features of the seven-transmembrane, G-protein-coupled receptor superfamily. Angiotensin II, acting through the AT1 receptor, also stimulates the Jak/STAT pathway by inducing ligand-dependent Jak2 tyrosine phosphorylation and activation. Here, we show that a glutathione S-transferase fusion protein containing the carboxyl-terminal 54 amino acids of the rat AT1A receptor physically binds to Jak2 in an angiotensin II-dependent manner. Deletional analysis, using both in vitro protocols and cell transfection analysis, showed that this association is dependent on the AT1A receptor motif YIPP (amino acids 319-322). The wild-type AT1A receptor can induce Jak2 tyrosine phosphorylation. In contrast, an AT1A receptor lacking the YIPP motif is unable to induce ligand-dependent phosphorylation of Jak2. Competition experiments with synthetic peptides suggest that each of the YIPP amino acids, including tyrosine 319, is important in Jak2 binding to the AT1A receptor. The binding of the AT1A receptor to the intracellular tyrosine kinase Jak2 supports the concept that the seven-transmembrane superfamily of receptors can physically associate with enzymatically active intracellular proteins, creating a signaling complex mechanistically similar to that observed with growth factor and cytokine receptors.     

An automated coding and classification system with supporting database for effective design of manufacturing systems

The philosophy of group technology (GT) is an important concept in the design of flexible manufacturing systems and manufacturing cells. Group technology is a manufacturing philosophy that identifies similar parts and groups them into families. Beside assigning unique codes to these parts, group technology developers intend to take advantage of part similarities during design and manufacturing processes. GT is not the answer to all manufacturing problems, but it is a good management technique with which to standardize efforts and eliminate duplication. Group technology classifies parts by assigning them to different families based on their similarities in: (1) design attributes (physical shape and size), and/or (2) manufacturing attributes (processing sequence). The manufacturing industry today is process focused; departments and sub units are no longer independent but are interdependent. If the product development process is to be optimized, engineering and manufacturing cannot remain independent any more: they must be coordinated. Each sub-system is a critical component within an integrated manufacturing framework. The coding and classification system is the basis of CAPP and the functioning and reliability of CAPP depends on the robustness of the coding system. The proposed coding system is considered superior to the previously proposed coding systems, in that it has the capability to migrate into multiple manufacturing environments. This article presents the design of a coding and classification system and the supporting database for manufacturing processes based on both design and manufacturing attributes of parts. An interface with the spreadsheet will calculate the machine operation costs for various processes. This menu-driven interactive package is implemented using dBASE-IV. Part Family formation is achieved using a KAMCELL package developed in TURBO Pascal.     

Lowered antioxidant status of red blood cells in post-parturient haemoglobinuria of buffaloes

Vaccination against tick-borne encephalitis with FSME-Immun vaccine was started in the Department of Infectious Diseases, University Medical School of Bia?ystok, Poland, in 1992. No serious adverse reactions after vaccine administration were observed. Post-vaccine side effects were reported in 242 (11.3%) persons after the first dose (n = 2,135) and only in 14 patients (1.2%) after the second one (n = 1,183). These effects were mild and transitory. No relationship was observed between the frequency of adverse reactions, general or local, and the initial anti-TBE virus antibody titres or the age of the immunized individuals. Post-vaccine side effects were reported significantly more frequently among people not bitten by ticks.     

Influence of joint detail on the flexural/torsional interaction of thin-walled structures

For a structure formed from two thin-walled open members connected at 90°, torsion applied to one member can result in torsion as well as flexure in the second member, with the magnitude and direction of this torsion as well as flexure in the second member being determined by the type of joint used. Conventional structural analysis would normally assume the presence of only flexure in the second member. The results from a finite element study of structures formed from thin-walled channel sections connected by box, mitre and stiffened mitre joints is presented and an explanation for the behaviour of the different joint types is given. It is shown that for the box joint the warping deformation of the loaded member is the dominant factor in determining the magnitude and direction of the twisting of the second member, whilst this is determined for the stiffened mitre joint primarily by the St Venant rotation deformation of the loaded member. For the unstiffened joint it is shown that the warping and St Venant rotation deformation effects tend to cancel each other out.