X射线三轴晶衍射法测量半绝缘GaAs单晶的化学配比

采用X射线三轴晶衍射法,根据As间隙原子对作为过量As在GaAs单晶材料中存在的主要形式的模型,可以无损、高精度测量半绝缘GaAs单晶的化学配比.并探讨了引起晶格变化的原因及其与熔体组分的关系,对于制备高质量GaAs单晶及其光电器件具有重要的意义.     

解析曾懿《中馈录》——兼论川菜菜系雏形的形成

川菜菜系不是短时间内突然出现的,它有一个萌芽、雏形(开始形成)、成熟和发展的过程。本文尝试通过解析川菜经典食谱之一的曾懿《中馈录》,来探讨川菜菜系雏形的形成。     

The uniformly valid asymptotic solutions of transient cone segments in pressure vessels

In this paper, according to the theory of thin shells, a basic equation in complex form is derived for conical thin shells with linearly varying wall thickness under symmetric loads, and the uniformly valid asymptotic solutions are given.     

Y-Ba-Cu-O超导涂层的研制

用等离子喷涂工艺制备了 Y-Ba-Cu-O 高临界温度超导涂层,涂层的初始转变温度为101K、零电阻温度为86K。电阻率与磁化率的测量结果表明这种超导涂层具有与烧结超导块体相类似的性能,X 光衍射谱显示出涂层主要由 YBa_2Cu_3O_(?)单相化合物组成。     

Residual Stress Simulation of Injection Molding

In this study, distribution and history of residual stresses in plaque-like geometries are simulated based on linear thermoviscoelastic model, which helps to understand the mechanics and evolution of the residual stresses in the injection molding process. The numerical calculation of direction, combined with the specified boundary conditions. Results show that the stress variation across the thickness exhibits a high surface tensile value changing to a compressive peak value close to the surface, with the core region experiencing a parabolic tensile peak. Residual stress distribution throughout the thickness is almost same along the flowpath and the final residual stresses value near the gate is lower than the value near the end of flowpath.     

Matlab在“计算机辅助电路分析”中的应用

"计算机辅助电路分析"课程,是通过计算机仿真实验来训练学生分析和解决电路问题的能力.实践证明,将Matlab软件,特别是其中的Simulink仿真模块作为电路分析工具,引入到计算机辅助电路分析课程教学中,收到了良好的教学效果.本文以二阶电路阶跃响应问题的求解为例,介绍了辅以Matlab的五种求解方法,并对这五种方法的特点进行了比较,说明了Matlab在电路分析方面的优越性.     

High-yield synthesis of single-crystalline 3C-SiC nanowires by a facile autoclave route

Single-crystalline 3C-SiC nanowires have been synthesized in large scale through a one-step autoclave route by the reaction of SiCl₄, (C₅H₅)₂Fe and metallic Na at 500 °C. Electron microscopy investigations show that the nanowires have typical diameters of 15-50 nm, lengths up to several tens of micrometers and grow along the [111] direction. The possible growth mechanism of the nanowires is discussed.     

催化裂化技术现状及发展趋势

详述了国内外最新渣油催化裂化、多产柴油催化裂化、低碳烯烃催化裂化、生产清洁燃料催化裂化及催化剂的技术进展，同时根据我国实际情况对今后催化裂化技术的发展提出了建议。     

Hot-Dip Galvanized Sheet Production and Application

1　ＨｉｓｔｏｒｙｏｆＨｏｔ ＤｉｐＧａｌｖａｎｉｚｅｄＳｈｅｅｔＰｒｏ ｄｕｃｔｉｏｎ　　Ｉｔｉｓａｓｔｒｉｋｉｎｇｆａｃｔｔｈａｔｏｎｅｔｅｎｔｈｏｆｉｒｏｎａｎｄｓｔｅｅｌｐｒｏｄｕｃｔｓａｒｅｃｏｒｒｏｄｅｄ .Ｐｅｏｐｌｅｔｒｙｔｈｅｉｒｂｅｓｔｔｏａｖｏｉｄｏｒｒｅｄｕｃｅｔｈｅｃｏｒｒｏｓｉｏｎｏｆｉｒｏｎａｎｄｓｔｅｅｌ.Ｚｉｎｃａｓａｍｅｔａｌｗａｓｆｉｒｓｔｆｏｕｎｄｔｈａｔｉｔｃｏｕｌｄｐｒｏｔｅｃｔｔｈｅｓｔｅｅｌｆｒｏｍｃｏｒｒｏｓｉｏｎｂｙｃｏｒｒｏｓｉｏｎ ｐｒｏｄｕｃｔ…     

Hydriding and Dehydriding Characteristics of Mechanically Alloyed LaMg_(17) Ni Composite Material

Magnesiumandmagnesiumalloyshavebeenin vestigatedashydrogenstoragematerialsforseveralde cadesbecausefarmorehydrogenbyweightcanbestoredinthemthaninmostoftheothercurrentlyknownhydrogenstoragealloys .Moreover ,thehighnaturalabundanceofMg ,itslightmassandenviron mentalcompatibilitypotentiallymakemagnesiumoneofthemostprospectivecandidatesforfuturehydrogenstoragematerials .Unfortunately ,thepracticalappli cationofMganditsalloyshasbeenlimitedonlytocertainstoragedevicebecauseoftheirpoorhydriding dehydr…