Transformations of (14C-lignin) cell walls of wheat by rumen microorganisms

The lower halves of apical internodes of wheat harvested at the flowering stage were labelled with [U-¹⁴C] phenylalanine (phe) or with [O¹⁴CH₃] sinapic acid (sin). Cell wall residues (CWR) and saponified residues (SR) were incubated in a fermenter simulating the rumen for 7 days with rumen fluid or without microorganisms (controls). PheCWR was labelled in all lignin units (measured as aldehydes from nitrobenzene oxidation), in phenolic acids and slightly in proteins. Labelling of pheSR was more lignin-specific. SinCWR and sinSR were specifically labelled in syringyl units of lignin. The fermentation of CWR resulted in phenylpropane-derived unit losses in the following decreasing order: ferulic acid>p-coumaric acid>syringaldehyde>vanillin>p-hydroxybenzaldehyde. If allowance is made for slight losses in controls, 61, 52, 61 and 63% of the phenylpropanes of pheCWR, sinCWR, pheSR and sinSR, respectively, were transformed into an acid-precipitable fraction, an acid-soluble fraction and ¹⁴CO_2. The comparison of pheCWR and sinCWR degradation showed that syringyl units were solubilised into acid-precipitable molecules to a greater extent than the other lignin units; demethylation of the syringyl units of lignins was also evident from the different productions of ¹⁴CO₂. Alkali-resistant lignins of SR were mainly transformed into acid-precipitable molecules and were weakly degraded. Lignin solubilisation and degradation seem to be governed by different mechanisms which depend on both cell wall structure and rumen microflora.     

Determination of Deoxynivalenol in Wheat Bran and Whole-Wheat Flour by Fluorescence Polarization Immunoassay

A rapid and accurate fluorescence polarization (FP) immunoassay has been optimized for the determination of deoxynivalenol (DON) in wheat bran and whole-wheat flour. A preliminary treatment with activated charcoal was used to eliminate the strong matrix effect due to highly colored interfering compounds present in raw wheat bran extracts. In particular, matrix effect was removed by adding activated charcoal to the wheat bran extract (3.5 mg/mL) and mixing for 3 min of incubation time prior to the FP immunoassay analysis. No preliminary treatment was necessary for whole-wheat flour. Average recoveries from samples spiked with DON at levels of 500, 1,000, and 1,500 μg/kg were 95 % for wheat bran and 94 % for whole-wheat flour, with relative standard deviation generally lower than 13 %. Limits of quantification of the optimized FP immunoassay were 120 μg/kg for both matrices. The overall time of analysis was lower than 15 min for wheat bran and 10 min for whole-wheat flour. Good correlations (r?>?0.971) were observed between DON contents obtained by both FP immunoassay and high-performance liquid chromatography with immunoaffinity cleanup for 37 and 23 samples of naturally contaminated wheat bran and whole-wheat flour, respectively. These results show that the FP immunoassay is suitable for high-throughput screening as well as for quantitative determination of DON in wheat bran and whole-wheat flour.     

Determination of Deoxynivalenol and Nivalenol in Wheat by Ultra-Performance Liquid Chromatography/Photodiode-Array Detector and Immunoaffinity Column Cleanup

An ultra-performance liquid chromatography (UPLC®) method has been developed for the simultaneous determination of deoxynivalenol (DON) and nivalenol (NIV) in wheat. Ground sample was extracted with water and the filtered extract was cleaned up through an immunoaffinity column containing a monoclonal antibody specific for DON and NIV. Toxins were separated and quantified by UPLC® with photodiode-array detector (λ?=?220 nm) in less than 3 min. Mean recoveries from blank wheat samples spiked with DON and NIV at levels of 100–2,000 μg/kg (each toxin) ranged from 85 to 95 % for DON and from 81 to 88 % for NIV, with relative standard deviations less than 7 %. Similar recoveries were observed from spiked samples when methanol/water (80:20, v/v) was used as extraction solvent. However, by using a wheat sample naturally contaminated with DON and NIV, the one-way analysis of variance (Student–Newman–Keuls test) between different extraction solvents and modes showed that water extraction provided a significant increase (P?<?0.001) in toxin concentrations (mean values of six replicate analyses) with respect to methanol/water (80:20, v/v). No significant difference was observed between shaking (60 min) and blending (3 min). The limit of detection (LOD) of the method was 30 μg/kg for DON and 20 μg/kg for NIV (signal-to-noise ratio 3:1). The immunoaffinity columns showed saturation of DON/NIV binding sites at levels higher than 2,000 ng in blank wheat extracts spiked with the corresponding amount of mycotoxin, as single mycotoxin or sum of DON and NIV. The range of applicability of the method was from LOD to 4,000 μg/kg, as single mycotoxin or sum of DON and NIV in wheat. The analyses of 20 naturally contaminated wheat samples showed DON contamination in all analyzed samples at level ranging from 30 to 2,700 μg/kg. NIV was detected in two samples at negligible toxin levels (up to 46 μg/kg). This is the first UPLC® method using immunoaffinity column cleanup for the simultaneous and sensitive determination of DON and NIV in wheat.     

Enzymatic browning reactions in apple and apple products

This review examines the parameters of enzymatic browning in apple and apple products that is, phenolic compounds, polyphenoloxidases, and other factors (ascorbic acid and peroxidases), both qualitatively and quantitatively. Then the relationships between intensity of browning and the browning parameters are discussed, including a paragraph on the methods used for browning evaluation. Finally, the different methods for the control of browning are presented.     

Study of the natural occurrence of T-2 and HT-2 toxins and their glucosyl derivatives from field barley to malt by high-resolution Orbitrap mass spectrometry

This paper reports a new method for the determination of T-2 and HT-2 toxins and their glucosylated derivatives in cereals, and some survey data aimed at obtaining more comprehensive information on the co-occurrence of T-2 and HT-2 toxins and their glucosylated derivatives in naturally contaminated cereal samples. For these purposes, barley samples originating from a Northern Italian area were analysed by LC-HRMS for the presence of T-2, HT-2 and relevant glucosyl derivatives. Quantitative analysis of T-2 and HT-2 glucosides was performed for the first time using a recently made available standard of T-2 glucoside. The glucosyl derivative of HT-2 was detected at levels up to 163 µg kg^–1 in 17 of the 18 analysed unprocessed barley grains, whereas the monoglucosyl derivative of T-2 toxin was detected in only a few samples and at low µg kg^–1 levels. The ratio between glucosylated toxins (sum of T-2 and HT-2 glucosides) and native toxins (sum of T-2 and HT-2) ranged from 2% to 283%. Moreover, taking advantage of the possibility of retrospective analysis of full-scan HRMS chromatograms, samples were also screened for the presence of other type-A trichothecenes, namely neosolaniol, diacetoxyscirpenol and their monoglucosyl derivatives, which were detected at trace levels. A subset of nine different samples was subjected to micro-maltation in order to carry out a preliminary investigation on the fate of T-2, HT-2 and relevant glucosides along the malting process. Mycotoxin reduction from cleaned barley to malt was observed at rates ranging from 4% to 87%.     

14C labelling of lignins of normal and bm3 maizes for fermentation studies

[U-¹⁴C] phenylalanine (phe*) and [O¹⁴CH₃] sinapic acid (sin*) were infused into the cut ends of normal and bm3 maizes (anthesis stage) under or above the last node or at mid-internode, with or without the leaf, in light or in darkness. Radioactivity was measured in the organs, and in phenolic constituents of the cell wall and saponified residues of the bases and tops of the apical inter-node. In both maize genotype labelled under the node the radioactivity was distributed more evenly in the organs with sin* than with phe*. Infusion above the node and at mid-internode greatly increased radioactivity in the bases and tops, respectively. Removal of the leaf only slightly increased the radioactivity, mainly in the bases, and no clear-cut effect of darkness was observed. Phe* labelled the phenolic acids and the three lignin units, but the syringyl units of bm3 maize were only slightly labelled. Sin* specifically labelled the syringyl units, which represented the least condensed fraction of lignins. Both the native and labelled lignins were highly alkali soluble. There were differences in lignin biogenesis between the bases and tops, and between normal and bm3 maizes. The newly formed lignins were slightly different from the native lignins but had similar types of heterogeneity, with variations in the internode and between genotypes similar to those in native lignins. Provided due allowance is made for the distinguishing characteristics of newly formed lignins, the [¹⁴C-lignin] cell walls, which are strongly labelled on complementary structures, seem suitable model substrates for fermentation studies.     

Mesure de largeurs de trait en éclairage partiellement cohérent par modélisation du transfert et utilisation de techniques de moindres carrés

A method of transfer modelling in partially coherent microscopy is presented. By determining the minimal error between simulated and experimental data by means of a lms technique, it is then possible to retrieve, with accuracy, the linewidth on wafers.     

Soy protein isolate nanocomposite film enriched with eugenol,an antimicrobial agent: Interactions and properties

Nanocomposites films were designed from soy protein isolates (SPI), clays (Na⁺‐MMT), and eugenol an antimicrobial agent. Interactions between Na⁺‐MMT and eugenol were evidenced by a shift of the d‐spacing by X‐ray diffraction analysis. The addition of Na⁺‐MMT (5 and 7.5% w/w) in SPI solution increased its shear thinning behavior and its consistency. Accordingly, a good exfoliation of clays in SPI films was observed. The glass transition temperature of SPI films was impacted by the clays addition but not the water vapor permeability. In contrast, the addition of eugenol in SPI solution did not affected the consistency but induced a decrease of the SPI film T_g and an increase of the water vapor permeability. The presence of eugenol counterbalanced the effect of clays on consistency of film‐forming solution. The clay intercalation process was facilitated and the water vapor permeability and active agent release were modified. The presence of clay did not affect the antibacterial effect of eugenol/SPI films. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45941.