Designing for parallel fuzzy computing

As the number of fuzzy logic applications increases, demand for faster architectures will grow. Our design for a VLSI fuzzy processor uses fuzzy inference techniques that optimize processing time. Preprocessing that reduces the number of rules to be processed, parallel computation of active rule degrees of activation, and scalability are major features of this architecture. The journal issue contains a concise summary of this article. The complete article is linked to Micro's home page on the World Wide Web (http://www.computer.org/pubs/micro/micro.htm)     

Controlled oxygen incorporation in indium gallium arsenide and indium phosphide grown by metalorganic vapor phase epitaxy

The defect engineering in metalorganic vapor phase epitaxy In_xGa_1-xAs and InP by controlled oxygen doping using diethyl aluminum ethoxide (DEALO) was developed in this study. DEALO doping has led to the incorporation of Al and O, and the compensation of shallow Si donors in In_xGa_1−xAs: Si with 0 ≤ x ≤ 0.25. With the same DEALO mole fraction during growth, the incorporation of Al and O was found to be independent of x, but the compensation of Si donors decreases with increasing In content. Deep level transient spectroscopy analysis on a series of In_xGa_1-xAs: Si. samples with 0 ≤ x ≤ 0.18 revealed that oxygen incorporation led to a set of deep levels, similar to those found in DEALO doped GaAs. As the In composition was increased, one or more of these deep levels became resonant with the conduction band and led to a high electron concentration in oxygen doped In_0.53Ga_0.47As. Low temperature photoluminescence emission measurements at 12K on the same set of samples revealed the quenching of the near-band edge peak, and the appearance of new oxygen-induced emission features. DEALO doping in InP has also led to the incorporation of Al and O, and the compensation of Si donors due to oxygen-induced multiple deep levels.     

Physicochemical characteristics and leachability of scale and sludge from Bulalo geothermal system, Philippines

Scale and sludge from Bulalo geothermal field, Philippines, have been characterized by whole rock analysis, radioactivity counting, size analysis, light microscopy, scanning electron microscopy, and X-ray diffraction. Their leachability was assessed by regulatory leaching procedures and by sequential extraction. Both scale and sludge consisted mostly of oxides of Si, Al, and Fe with no radionuclides detected. The scale had 10% S content. Sulfides and silicates were important phases in both samples having size ranges from submicron to 2 mm. Geothermal soils at Bulalo have higher than normal soil levels of As, S, Cu, Cr, Zn, and Pb but regulatory leaching tests indicated that these elements are not released. However, the sequential extraction showed that As, Cu, and Zn were leachable under extreme conditions.     

Comparison between normal and reverse thin crystalline silicon solar cells

The newly developed ingot growing techniques, as the three-grain and the columnar multigrain ingot processes, are now offering the possibility of slicing thinner wafers (≤ 100 μm). In this paper we present the results obtained on p type large area (≥ 100 cm²) and 100 μm thick wafers by using both conventional and reverse cell manufacturing technologies.The conventional cells are provided with aluminium or boron BSF plus screen-printed silver mirror or a silver-aluminium net; the reverse cells have a FSF and the deep back junction completely covered by a screen-printed or CVD silver layer.The constructing parameters have been chosen on the base of one and two dimensions modeling and both raw material and devices have been completely characterized.This work shows that very thin wafers do not introduce serious problems for the conventional manufacturing of solar cells. The efficiencies of the normal and of the reverse cells are found to be comparable and are of the same order than those of thicker cells, however at a significant lower cost. The main obtained result has to be related to the demonstration of a cell manufacturing feasibility starting from very thin wafers.     

The effect of residual stresses on brittle and ductile fracture initiation predicted by micromechanical models

The effect of a realistic residual stress field on the predicted initiation of brittle and ductile fracture in a pressure and axially loaded circumferentially cracked pipe is examined using finite element analysis, micromechanical models of fracture initiation, andJ-Q theory. The study confirms that residual stresses contribute to the driving force and reduce fracture loads early in the loading history. In addition, results show that the residual stresses severely alter theJ-value (i.e., fracture toughness) predicted for the onset of brittle fracture. The reason for this decrease is found to be the increase in constraint generated by the residual stress field. In contrast, the effect of residual stresses on the ductile fracture initiation toughness is shown to be negligible. kw]Key words kw]residual stress kw]fracture initiation kw]micromechanics     

Precision measurements of the degradation of semiconductor optoelectronic components

A method, apparatus and results of measurements of the degradation of semiconductor optoelectronic components (light-emitting diodes and photodiodes) are described. The difficulties that occur in such investigations are pointed out. Translated from Izmeritel'naya Tekhnika, No. 10, pp. 33–35, October, 1996.     

Analysis of adhesive bonded composite lap joints with transverse stitching

The effect of transverse stitching on the stresses in the adhesive is investigated using an adhesive sandwich model with nonlinear adhesive properties and a transverse stitching model for adhesive bonded composite single-lap and double-lap joints. Numerical results indicate that, among all stitching parameters, thread pretension and stitch density have significant effect on the peel stresses in the adhesive; increase in the thread pretension and the stitch density leads to a decrease in peel stress in the adhesive, while an increase in other parameters generally results in a negligible reduction in peel stress. The effect of stitching was found to be negligible on the shear stresses in the adhesive. Thus it is concluded that stitching is effective for the joints where peel stresses are critical and ineffective for those where shear stresses are critical.     

Dissolution Behavior of Griseofulvin Solid Dispersions Using Polyethylene Glycol, Talc, and Their Combination as Dispersion Carriers

Griseofulvin solid dispersions were prepared using polyethylene glycol 6000 (PEG), talc, and their combination as carriers by the solvent method. The dissolution of griseofulvin from these dispersions was studied. It was found that in these carriers the drug dissolution rate was a function of drug loading. The dissolution rate from dispersions prepared using PEG was similar to that from PEG/talc dispersions, especially at a low percentage of drug loading. Dispersions of PEG and PEG/talc provided dissolution rates faster than those from dispersions of talc. The incorporation of talc in PEG yielded dispersions with properties of less tackiness and ease for handling. Dissolution kinetics, based on the Hixson-Crowell equation, was used to determine the characteristics of griseofulvin particles in dispersions. Linear relationships were obtained for PEG and PEG/talc dispersions that indicated the presence of a uniformly sized monoparticulate system, whereas deviation from linearity was observed for talc dispersions. This appeared to be a multiparticulate system in which particles were present as free form and adsorbed form on the surface of talc.