Establishing a high-accuracy spectral response scale in the near infrared with digital filters

Spectrally invariant detectors are commonly used to interpolate or extrapolate the responsivity of InGaAs detectors in the infrared from absolute calibrations at a few wavelengths. The random noise in such detectors limits the accuracy that can be achieved in a narrowband, double-monochromator setup. We propose the application of a dedicated digital filter, which reduces the uncertainty by 30%, and combine it by calibrating a group of three detectors. The uncertainties are propagated from the observed variance in the relative measurement to the combined uncertainty of 0.4% (2sigma) in the responsivity values of the InGaAs detectors in the range of 1010-1640 nm.     

Coral recovery at Aldabra Atoll, Seychelles: five years after the 1998 bleaching event

Changes in reef benthos were assessed at Aldabra Atoll following the mass coral bleaching event of 1998. Video transects were used to survey the benthos and analysed using the Australian Institute of Marine Science five-dot method. Comparison of coral cover data collected by the Cambridge Southern Seychelles Atoll Research Programme with data collected during this study revealed that mortality of coral at Aldabra following the bleaching event was approximately 66% at 10 m depth and 38% at 20 m depth. Five years on, there are signs of hard coral recovery at some locations, but in spite of several years of high coral recruitment (7-9 recruits per m2 at 10 m depth, 4-6 recruits per m2 at 20 m depth, where recruits are defined as any colony under 5 cm maximum diameter), recovery of hard coral has not occurred at a significant level. There has been a considerable increase in soft coral cover at some locations, which was dominated by the genus Rhytisma. Macro algal cover did not increase following the bleaching event, although, as would be expected, dead corals have been colonized by coralline algae. There have been no further events leading to large-scale coral mortality at Aldabra since 1998.     

Cu exposure under field conditions coselects for antibiotic resistance as determined by a novel cultivation-independent bacterial community tolerance assay

Environmental reservoirs of antibiotic resistance are important to human health, and recent evidence indicates that terrestrial resistance reservoirs have expanded during the antibiotic era. Our aim was to study the impact of Cu pollution as a selective driver for the spread of antibiotic resistance in soil. Bacteria were extracted from a well-characterized soil site solely contaminated with CuSO? more than 80 years ago and from a corresponding control soil. Pollution-induced bacterial community tolerance (PICT) to Cu and a panel of antibiotics was determined by a novel cultivation-independent approach based on [3H]bromodeoxyuridine (BrdU) incorporation into DNA and by resistance profiling of soil bacterial isolates on solid media. High Cu exposure selected for Cu-tolerant bacterial communities but also coselected for increased community-level tolerance to tetracycline and vancomycin. Cu-resistant isolates showed significantly higher incidence of resistance to five out of seven tested antibiotics (tetracycline, olaquindox, nalidixic acid, chloramphenicol, and ampicillin) than Cu-sensitive isolates. Our BrdU-PICT data demonstrate for the first time that soil Cu exposure coselects for resistance to clinically important antibiotics (e.g., vancomycin) at the bacterial community-level. Our study further indicates that Cu exposure provides a strong selection pressure for the expansion of the soil bacterial resistome.     

Tourists’ landscape perceptions and preferences in a Scandinavian coastal region

European cultural landscapes have been subject to change since the middle of the twentieth century, and among the most significant alterations are general re-growth, reforestation, and overgrowth. Such changes might lead to landscape loss for locals and deterioration of vistas for sightseeing holidaymakers. This article responds to a lack of academic research on landscape perceptions among tourists. The main objective is to explore international tourists’ landscape perceptions in a coastal area in northern Scandinavia, focusing on three different concepts thought to be important for tourists’ landscape preferences: typicality, vegetation lushness, and degree of human influence. A combination of free and directed sorting procedures was employed. Quantitative and categorical data derived from the multiple sorting methods were subjected to multidimensional scaling analysis. The results indicate that foreign tourists might have an understanding of re-growth in the case area. Preference ratings gave mixed results in relation to vegetation and human influence as important features for landscape preferences, as found in previous studies. The findings emphasise the need for taking into consideration typicality of setting in future landscape research.     

Investigation of bulk and solar cell properties of ingots cast from compensated solar grade silicon

In this work, the effect of the concurrent presence of B and P on bulk and solar cell properties of directionally solidified multicrystalline ingots from commercially compensated solar grade silicon (SoG‐Si) feedstock produced by Elkem Solar was investigated. The initial B and P content prior to the directional solidification experiment was 1260 and 762 ppba, respectively. Two reference ingots have been solidified in a silica crucible from 100% electronic grade silicon (EG‐Si) feedstock, with 332 ppba of boron added. All ingots have been cast under similar process parameters. The resistivity measurements by Four Point Probe (FPP) are in good agreement with the net dopant content, i.e., N_A − N_D for p‐type material, measured by Glow Discharge Mass Spectrometer (GDMS). Bulk lifetime measurements show a decrease in the values compared to the EG reference. Lifetime distributions show the highest values of 13 and 19 µs at approximately half ingot height, compared to 30 and 44 µs in the reference ingots. This decrease can be due to the concurrent effect of compensation and of other impurities present in the ingot. However, the content of several transition metals measured by GDMS at half ingot height was not significantly higher than that of the reference ingots. Oxygen content as measured by Fourier Transform Infra‐Red (FTIR) spectroscopy shows no significant difference compared to the references. Solar cells made from the compensated ingots and processed under standard process conditions show efficiency values up to 15.5% and fill factor values up to 78%, comparable to conventional multicrystalline silicon cells. Copyright © 2010 John Wiley & Sons, Ltd.     

A self‐calibrating led‐based solar test platform

A compact platform for testing solar cells is presented. The light source comprises a multi‐wavelength high‐power LED (light emitting diode) array allowing the homogenous illumination of small laboratory solar cell devices (substrate size 50 × 25 mm) within the 390–940 nm wavelength range. The spectrum can be synthesized by independent tuning of the 18 different wavelengths to mimic AM1.5G as well as various indoor lamp spectra. The intensity can be controlled with a 2¹⁴‐bit accuracy and intensities up to 3 suns are possible with an approximate AM1.5G spectral distribution. For several wavelengths intensities up to 10 suns is possible, and for a few wavelengths up to 30 suns can be reached. The setup is equipped with reference diodes and an optical fibre coupling enabling calibration, monitoring and control of the light impinging on the sample. Through a computer controlled interface, it is possible to perform all the commonly employed measurements on the solar cell at very high speed without moving the sample. In particular, the LED‐based illumination system provides an alternative to light‐biased incident photon‐to‐current efficiency measurement to be performed which we demonstrate. Both top and bottom contact is possible and the atmosphere can be controlled around the sample during measurements. The setup was developed for the field of polymer and organic solar cells with particular emphasis on enabling different laboratories to perform measurements in the same manner and obtain a common basis for comparing data. The use of the platform is demonstrated using a standard P3HT:PCBM polymer solar cell but is generally applicable to any solar cell technology with a spectral response in the 390–950 nm region. Copyright © 2010 John Wiley & Sons, Ltd.     

An acrylate-based quasi-solid polymer electrolyte incorporating a novel dinitrile poly(ethylene glycol) plasticizer for lithium-ion batteries

Journal of Materials Science - The performance of solid polymer electrolytes is characterized by lower ionic conductivity than conventional liquid electrolytes but provides advantages in terms of...