A molten metal jet impingement on a flat spreading surface

ABSTRACT

In the event of a severe accident, past experiences such as Three Mile Island and Fukushima Daichi have shown that the reactor core of a light-water nuclear reactor, if not properly safeguarded, could go through a meltdown. This will be followed by the formation of a corium, a mix of molten fuel elements, and liquid metals from the Reactor Pressure Vessel (RPV). In the worst-case scenario, a melt through from the RPV can occur and lead to the spreading of the corium, in the form of a molten element’s jet impinging on a flat concrete structure of the Primary Containment Vessel (PCV). To enhance the decommissioning and the safety procedure, scope of the present article is to deepen the understanding of the phenomena involved in the mentioned scenario, mainly jet-instability and molten material spreading. In the present study, experiments were carried out, by using corium simulant materials such as Copper and Tin, to investigate the link between the instability of the gravity-driven molten metal jet and the impinging followed by its spreading over a flat area.     

Determination of hyoscyamine and scopolamine in serum and urine of humans by liquid chromatography with tandem mass spectrometry

A simple method was developed for the analysis of hyoscyamine and scopolamine in human serum and urine using liquid chromatography with tandem mass spectrometry (LC/MS/MS). Hyoscyamine and scopolamine in serum and urine were cleaned up with an Oasis HLB cartridge and a PSA cartridge. The LC separation was carried out on an ODS column, using linear gradient elution with 5 mmol/L IPCC-MS3-methanol as the mobile phase. The mass spectral acquisition was done in the positive ion mode by applying selected reaction monitoring (SRM). The recoveries of hyoscyamine and scopolamine were 86.0-105% from human serum and urine fortified at 0.2 ng/mL and 10 ng/mL. The detection limits of hyoscyamine and scopolamine were 0.02 ng/mL. Four serum and three urine samples of humans poisoned by eating Datura innoxia Mill. were analyzed by this method. Hyoscyamine and scopolamine were detected at the levels of 0.45-3.5 ng/mL in all serum samples and 170-670 ng/mL in all urine samples.     

Identification of genes from Aspergillus oryzae that are preferentially expressed in membrane-surface liquid culture

We identified 22 genes from Aspergillus oryzae that are preferentially expressed in membrane-surface liquid culture (MSLC), among which Ser/Thr protein kinase (aopk1) and phosphatase (aoppt) genes were cloned. We also revealed that aopk1 encodes a protein with an N-terminal sequence 150 amino acid residues longer than that predicted from the registered sequence in GenBank.     

Attractants for Rice Leaf Bug, <Emphasis Type="BoldItalic">Trigonotylus caelestialium</Emphasis> (Kirkaldy), are Emitted from Flowering Rice Panicles

Volatiles were extracted from rice plants of various growth stages with solid-phase microextraction (SPME) and analyzed by gas chromatography-mass spectrometry (GC-MS) to identify attractants that cause invasion of the rice leaf bug Trigonotylus caelestialium (Kirkaldy) into paddy fields. The composition of volatile blends produced by rice plants changed with rice development. In addition, volatile blend compositions differed between the panicles and the stems and leaves. The relative geranyl acetone content was high in all plant structures analyzed. In volatiles from whole plants in the fourth-leaf stage and panicles in the full-ripe stage, the relative content of green leaf volatiles (GLVs) was higher than that found in other rice plant structures. In contrast, relative terpene levels emitted from whole plants in the panicle-formation stage and by panicles and stems and leaves in the flowering stage were higher than those of other rice plant structures. However, the type of terpenes found differed between the panicles and the stems and leaves. Relative levels of β-caryophyllene in whole plants in the panicle-formation stage and panicles in the flowering stage were much higher than that in stems and leaves in the flowering stage. Our previous studies demonstrated that the odor from whole plants in the panicle-formation stage and panicles in the flowering stage is attractive to rice leaf bugs. Here, the attractiveness of β-caryophyllene to adult bugs was investigated in olfactometer assays. Adult females were attracted to β-caryophyllene at a concentration of 0.001%, which is approximately equivalent to the concentration produced by flowering rice panicles. However, β-caryophyllene also was present in the odor of whole plants in the fourth-leaf stage and in stems and leaves in the flowering stage. Furthermore, the amounts of this compound emitted from these structures were similar. Therefore, we suggest that the relative abundance of this compound in a volatile blend is important for attractance of the bugs.     

Contamination levels of PCDDs, PCDFs and Co-PCBs in commercial baby foods in Japan

To examine dioxin contamination in commercial baby foods in Japan, congener analyses of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) were performed on 102 varieties of baby foods obtained from supermarkets in 2001-2002. The toxic equivalent quantity (TEQ) levels for dioxins in samples ranged from < 0.001 to 0.135 pg-TEQ/g wet weight when undetected or trace levels of congeners were taken as zero. Among 102 samples tested, 26 samples exceeded 0.010 pg-TEQ/g. The highest TEQ value was for "sardine, vegetables" (0.135 pg-TEQ/g), followed by "Japanese radish (daikon), sardine" (0.080 pg-TEQ/g). Thus, dioxins were detected at low levels in baby foods containing animal products such as fishes and/or dairy products.     

The Complete Loss of p53 Expression Uniquely Predicts Worse Prognosis in Colorectal Cancer

p53 immunohistochemistry is considered an accurate surrogate marker reflecting the underlying TP53 mutation status and has utility in tumor diagnostics. In the present study, 269 primary CRCs were immunohistochemically evaluated for p53 expression to assess its utility in diagnostic pathology and prognostication. p53 expression was wild-type in 59 cases (23%), overexpressed in 143 cases (55%), completely lost in 50 cases (19%), and cytoplasmic in 10 cases (4%). p53 immunoreactivity was associated with tumor size (p = 0.0056), mucus production (p = 0.0015), and mismatch repair (MMR) system status (p < 0.0001). Furthermore, among CRCs with wild-type p53 expression, a significantly higher number of cases had decreased CDX2 than those with p53 overexpression (p = 0.012) or complete p53 loss (p = 0.043). In contrast, among CRCs with p53 overexpression, there were significantly fewer ALCAM-positive cases than p53 wild-type cases (p = 0.0045). However, no significant association was detected between p53 immunoreactivity and the “stem-like” immunophenotype defined by CDX2 downregulation and ALCAM-positivity. Multivariate Cox hazards regression analysis identified tubular-forming histology (hazard ratio [HR] = 0.17, p < 0.0001), younger age (HR = 0.52, p = 0.021), and female sex (HR = 0.55, p = 0.046) as potential favorable factors. The analysis also revealed complete p53 loss (HR = 2.16, p = 0.0087), incomplete resection (HR = 2.65, p = 0.0068), and peritoneal metastasis (HR = 5.32, p < 0.0001) as potential independent risk factors for patients with CRC. The sub-cohort survival analyses classified according to chemotherapy after surgery revealed that CRC patients with wild-type p53 expression tended to have better survival than those with overexpression or complete loss after chemotherapy. Thus, immunohistochemistry for p53 could be used for the prognostication and chemotherapy target selection of patients with CRC.     

Study on the fabrication of a SU-8 cantilever vertically-allocated in a closed fluidic microchannel

Microsystem Technologies - This paper describes the fabrication of a vertically-allocated SU-8 cantilever in a closed fluidic channel. The difficulties to fabricate the vertically-allocated SU-8...     

JSFR key technology evaluation on fuel handling system

A simplified fuel handling system design for the demonstration Japan sodium-cooled fast reactor (JSFR) has been proposed. Fast Reactor Cycle Technology Development project phase I results of key technology evaluations on a pantograph fuel handling machine (FHM), a fuel transfer pot with two core component positions, dry spent fuel cleaning and minor actinide-bearing fresh fuel shipping cask are summarized. A full-scale FHM mockup has been fabricated and tested in the air accumulating performance and seismic tolerance data. A mockup fuel transfer pot with fins and chromium carbide coating has been fabricated and tested with sodium accumulating heat transfer performance data. Several sodium cleaning tests using a dummy subassembly has been conducted accumulating cleaning performance data. For fresh fuel shipping cask, a design tool for evaluation of heat transfer capability has been developed and a helium gas cask shows cooling capability of minor actinide-bearing fresh fuel. Those experimental and analytical efforts have shown that key technologies to develop simplified fuel handling system are matured enough to proceed large-scale sodium experiments and conceptual design study for the demonstration JSFR.     

Effect of expander shape on cooling characteristics by using a model pulse tube refrigerator

Pulse tube refrigerators do not have moving parts in the cold section, and they have low vibration, high reliability, and long life. The expander in refrigerators typically has an inverted U or coaxial shape because this attains a wider absorber area, lower height, and compactness. However, the performance of a Stirling-type pulse tube refrigerator is inferior to that of a Stirling refrigerator. Cooling characteristics of the pulse tube refrigerator greatly depend on the shape of the expander. In this study, an inertance-type refrigerator, which uses ambient air for the working gas, was developed to examine the effect of expander shape. This refrigerator model with changeable expander operated with a Stirling cycle, and it was composed of a reciprocating compressor, after-cooler, regenerator, absorber, pulse tube, hot-end, and inertance tube with reservoir. The following expander shapes were tested: in-line, L shape, L-L shape, and coaxial shape. The effect of expander shape on cooling capacity was examined experimentally and numerically using the model pulse tube refrigerator. The results of experiments showed that the L shape expander had the highest performance and the coaxial expander had the lowest performance. In addition, the characteristics of the gas flow in each expander were confirmed by fluid dynamics analysis.