Novel pyridinium photoinitiators and their applications for the ultraviolet crosslinking of acrylic pressure‐sensitive adhesives

The demand for ultraviolet (UV)‐crosslinkable pressure‐sensitive adhesives (PSAs) has rapidly been increasing. A variety of different PSAs containing new photoreactive pyridinium derivatives have been evaluated for their effectiveness in improving adhesion and cohesion in UV‐crosslinkable PSAs. PSAs have been evaluated with respect to the tack, peel adhesion, and shear strength. This article summarizes the breakthrough technology used to achieve better performances in UV‐crosslinkable acrylic PSAs. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Large area synthesis of conical carbon nanotube arrays on graphite and tungsten foil substrates

Conical carbon nanotube (CCNT) arrays were synthesized over a large area of approximately 1 cm² or more on graphite and tungsten foil substrates. Experimental observations reveal that nucleation is caused by catalyst metal cluster in the initial stages, but the tapered morphology occurs due to the difference in the rates of vertical growth by attachment carbon atoms at edges of growing graphene sheets and radial growth with epitaxial nucleation of new graphene layers near bottom at the substrate. The above mechanism is supported through re-growth experiments on straight multi-walled nanotubes and growth kinetics data, which suggest a linear relationship between the growth rate and ratio of diameter to length (d/l) of CCNT.     

Synthesis of Dihydrodiol Metabolites of Naphtho[8,1,2- GHI ]Chrysene and Dibenzo[ C,MNO ]Chrysene

Syntheses of naphtho[8,1,2- ghi ]chrysene (naphtho[1,2- e ]pyrene, N[ e ]P) 1 , dibenzo[ c,mno ]chrysene (naphtho[1,2- a ]pyrene, N[ a ]P) 2 and their dihydrodiol metabolites are described. The hydrocarbons N[ e ]P 1 and N[ a ]P 2 and their fjord region dihydrodiols 12 and 19 were synthesized using a Suzuki cross-coupling reaction followed by the appropriate manipulation of the functional groups. The K-region cis dihydrodiols of N[ e ]P-4,5-diol 20 , N[ a ]P-4,5-diol 23 , N[ a ]P-7,8-diol 24 were obtained by OsO 4 oxidation. The cis diols thus obtained were first converted to the corresponding quinones with pyridinium chlorochromate and, finally, to the desired trans dihydrodiols 22 , 27 , and 28 by NaBH 4 reduction. The mixture of trans N[ a ]P-4,5- and 7,8-dihydrodiols was separated by high-performance liquid chromatography.     

STRESSES IN VISCOELASTIC PLATE DRIED CONVECTIVELY

ABSTRACT

The deformations and drying-induced stresses in a saturated porous plate insulated on one side and dried convectively on the others were analysedPlate material is assumed to be elastic and viscoelastic. A rigorous solution of the problem is presented using Laplace transformations and the method of variable separation. The results are presented in the form of a series resulting from the solution of a Sturm-Liouville problem. The shrinkage stresses in the plate are caused by non-uniform distribution of the moisture content. The thermal stresses are not included as the consideration were confined to only constant rate drying period.     

Particle Morphology and Density Characterization by Combined Mobility and Aerodynamic Diameter Measurements. Part 2: Application to Combustion-Generated Soot Aerosols as a Function of Fuel Equivalence Ratio

Composition, shape factor, size, and fractal dimension of soot aerosol particles generated in a propane/O₂, flame were determined as a function of the fuel equivalence ratio (φ). Soot particles were first size-selected by a differential mobility analyzer (DMA) and then analyzed by an Aerodyne aerosol mass spectrometer (AMS). The DMA provides particles of known mobility diameter (d_m ). The AMS quantitatively measures the mass spectrum of the nonrefractory components of the particles and also provides the vacuum aerodynamic diam eter (d_va ) corresponding to the particles of known mobility diameter. The measured d_m, d_va , and nonrefractory composition are used in a system of equations based on the formulation presented in the companion article to estimate the particle dynamic shape factor, total mass, and black carbon (BC) content. Fractal dimension was estimated based on the mass-mobility relationship. Two types of soot particles were observed depending on the fuel equivalence ratio. Type 1: for φ < 4 (lower propane/O₂), d_va ; was nearly constant and independent of d_m . The value of d_va increased with increasing φ. Analysis of the governing equations showed that these particles were highly irregular (likely fractal aggregates), with a dynamic shape factor that increased with d_m and φ. The fractal dimension of these particles was approximately 1.7. These particles were composed mostly of BC, with the organic carbon content increasing as φ increased. At φ = 1.85, the particles were about 90% BC, 5% PAH, and 5% aliphatic hydrocarbon (particle density = 1.80 g/cm³). Type 2: for φ > 4 (high propane/O₂), d_va was linearly proportional to d_m . Analysis of the governing equations showed that these particles were nearly spherical (likely compact aggregates), with a dynamic shape factor of 1.1 (versus 1 for a sphere) and a fr actal dimension of 2.95 (3 for a sphere). These particles were composed of about 50% PAH, 45% BC, and 5% aliphatic hydrocarbons (particle density = 1.50 g/cm³). These results help interpret some measurement s obtained in recent field studies.     

Soot Particle Studies—Instrument Inter-Comparison—Project Overview

An inter-comparison study of instruments designed to measure the microphysical and optical properties of soot particles was completed. The following mass-based instruments were tested: Couette Centrifugal Particle Mass Analyzer (CPMA), Time-of-Flight Aerosol Mass Spectrometer—Scanning Mobility Particle Sizer (AMS-SMPS), Single Particle Soot Photometer (SP2), Soot Particle-Aerosol Mass Spectrometer (SP-AMS) and Photoelectric Aerosol Sensor (PAS2000CE). Optical instruments measured absorption (photoacoustic, interferometric, and filter-based), scattering (in situ), and extinction (light attenuation within an optical cavity). The study covered an experimental matrix consisting of 318 runs that systematically tested the performance of instruments across a range of parameters including: fuel equivalence ratio (1.8 ≤ φ ≤ 5), particle shape (mass-mobility exponent ( D _fm ), 2.0 ≤ D _fm ≤ 3.0), particle mobility size (30 ≤ d _m ≤ 300 nm), black carbon mass (0.07 ≤ m _BC ≤ 4.2 fg) and particle chemical composition. In selected runs, particles were coated with sulfuric acid or dioctyl sebacate (DOS) (0.5 ≤ Δ r _ve ≤ 201 nm) where Δ r _ve is the change in the volume equivalent radius due to the coating material. The effect of non-absorbing coatings on instrument response was determined. Changes in the morphology of fractal soot particles were monitored during coating and denuding processes and the effect of particle shape on instrument response was determined. The combination of optical and mass based measurements was used to determine the mass specific absorption coefficient for denuded soot particles. The single scattering albedo of the particles was also measured. An overview of the experiments and sample results are presented.     

Effect of carbon nanoparticle reinforcement on mechanical and thermal properties of silicon carbide ceramics

This research presents an analysis of the influence of graphene reinforcement on the thermal and mechanical properties of silicon carbide ceramics, at 2.5% (wt%) graphene content. The SiC composites, containing various carbon nanofillers (graphene oxide and graphene nanoparticles), were sintered by the classical two stage spark plasma sintering method. Two current modes were used, the continuous mode and the pulsed current mode. The results from photothermal radiometry and investigations of the mechanical properties showed that graphene additives significantly improve the thermal properties and toughness of material, sintered from a SiC powder. An 45% growth in the toughness was observed, which increased from 1.21 to 1.75?MPa/m^1/2. The thermal diffusivity value also increased from 0.60 to 0.71?cm²/s and giving an improvement in thermal properties of 18%. The friction coefficient reached 7% giving an increase in value from 0.62 to 0.66. Microscopic investigations supported the photothermal radiometry (PTR) results. Whilst, thermal imaging revealed homogeneity of the local thermal properties of the products fabricated from the starting SiC powder.     

STRESSES IN VISCOELASTIC PLATE DRIED CONVECTIVELY

The deformations and drying-induced stresses in a saturated porous plate insulated on one side and dried convectively on the others were analysedPlate material is assumed to be elastic and viscoelastic. A rigorous solution of the problem is presented using Laplace transformations and the method of variable separation. The results are presented in the form of a series resulting from the solution of a Sturm-Liouville problem. The shrinkage stresses in the plate are caused by non-uniform distribution of the moisture content. The thermal stresses are not included as the consideration were confined to only constant rate drying period.     

The Role of Neurotrophins in Multiple Sclerosis��Pathological and Clinical Implications

Multiple sclerosis (MS) is a chronic inflammatory demyelinating and neurodegenerative disease of the central nervous system (CNS) with unknown etiology. It was recently suggested that autoimmunity, which had long been considered to be destructive in MS, might also play a protective role in the CNS of MS patients. Neurotrophins are polypeptides belonging to the neurotrophic factor family. While neurotrophins mediate cell survival and proliferation in the nervous system, they are also expressed within peripheral blood mononuclear cells fraction (PBMCs) of immunological system. In MS additional neurotrophic support from PBMCs might compensate relative neurotrophins deficiency in the damaged CNS tissue that needs to be repaired. Failure to produce the adequate neurotrophins concentrations might result in decreased protection of the CNS, consequently leading to increased atrophy, which is the main determinant of MS patients’ end-point disability. There are several lines of evidence, both from clinical research and animal models, suggesting that neurotrophins play a pivotal role in neuroprotective and neuroregenerative processes that are often defective in the course of MS. It seems that neuroprotective strategies might be used as potentially valuable add-on therapies, alongside traditional immunomodulatory treatment in multiple sclerosis.