The use of cantilever bridges

Replacement of missing teeth with fixed bridgework often involves producing full crown retainers on teeth on both sides of an edentulous space. Unfortunately, this approach can result in the destruction of much healthy tooth tissue, and the clinician must balance the benefits of replacing missing teeth with the amount of tooth preparation required. Current thinking in restorative dentistry places the preservation of tooth tissue at a premium, and most practitioners are happy to use techniques that embrace this philosophy. Because of this, cantilever bridges have an increasing role in dental practice, where the replacement for a missing tooth or teeth has one or more abutments on only one side of the edentulous space, being unsupported at the other. Cantilever bridges fall into several types, depending on the number of abutments and types of retainers. This article describes the various cantilever bridge designs, considers the biomechanics of these restorations, and provides guidelines for their clinical use.     

Parameters affecting the use of the lac repressor system in eukaryotic cells and transgenic animals

Elements of the lactose operon were used to study parameters affecting gene expression in cultured cells and transgenic animals. A Lac repressor protein containing a nuclear transport signal was shown to inhibit expression of a reporter gene by interacting with lac operator sequences. In cultured cells, operator sequence, operator placement and induction parameters were all shown to be important for obtaining tight repression of a reporter gene followed by high level expression upon induction. Induction levels were also dependent on the reporter gene, with the luciferase gene yielding higher induction levels than the chloramphenicol acetyltransferase gene. In transgenic animals, the lacI mRNA was not detected in the C57BL/6 mouse strain until the animal was exposed to a demethylating agent. After 5-azacytidine treatment, expression of lacI mRNA was detected in the brain, heart, kidney, lung and ovary. In the FVB transgenic mouse strain, expression of lacI mRNA was detected without 5-azacytidine treatment in the kidney, liver, lung, and testes. Preliminary experiments with double transgenic animals containing both lacI and operator/luciferase transgenes showed a decrease in luciferase expression compared to the luciferase-only animals in both tissue extracts and transgenic fetal primary cultures, although IPTG induction was not achieved in these animals or primary cultures. The applicability and challenges of the system for regulation of gene expression are discussed.     

Biochemical identification of transmembrane segments of the Ca(2+)-ATPase of sarcoplasmic reticulum

The transmembrane segments of sarcoplasmic reticulum Ca(2+)-ATPase were determined by trypsinization of cytoplasmic side-out intact sarcoplasmic reticulum vesicles. The membrane portion of tryptic digest comprising the transmembrane fragments, joined by the intravesicular segments, was separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis after labeling with fluorescein 5-maleimide in the presence of sodium dodecyl sulfate. In this way, seven fluorescent bands of tryptic fragments below 11 kDa were observed which were derived from 4 pairs of membrane spanning segments and one hydrophobic sequence at the C-terminal end. Two peptides of 10.8 and 10.6 kDa had the identical N-terminal sequence beginning at Glu826, representing the transmembrane segments M7 and M8 and their connecting loop. A band at 8.1 kDa contained one peptide beginning at Tyr36 (M1/loop/M2). A 7.7-kDa peptide starting at Leu253 (M3/loop/M4) and a 7.3-kDa peptide beginning at Ala752 (M5/loop/M6) were also observed. A band at 6.7 kDa contained two peptides, one beginning at Ser48 (M1/loop/M2) and another beginning at Tyr763 (M5/loop/M6). In addition, a 4-kDa peptide beginning at Met925 was observed. The size of this peptide did not allow for a complete pair of transmembrane segments, but this peptide could have been derived from trypsinolysis between the last pair of membrane spanning segments. These data therefore provide biochemical evidence for at least 8 transmembrane segments and perhaps two more at the C-terminal end of the enzyme.     

Ubiquitin expression in inclusion body myositis. An immunohistochemical study

Ubiquitin has been shown by immunohistochemical studies to be a component of many of the filamentous inclusion bodies that are known in neuropathology. In the current study, we examined the expression of ubiquitin in 14 cases of typical inclusion body myositis, in skeletal muscle specimens from four cases of typical amyotrophic lateral sclerosis, and in muscle specimens from three normal controls. In the cases of inclusion body myositis, rimmed vacuoles were ubiquitin immunoreactive in all cases. Intrasarcoplasmic inclusions were positive in the nine cases that had them. In four cases, there were positive intranuclear inclusions, and in seven, there was homogeneous staining of nuclei. Atrophic fibers and necrotic fibers were positive in 11 and nine cases, respectively. In the cases of amyotrophic lateral sclerosis, atrophic fibers were positive in three cases, and focal nuclear staining was seen in two. In one of the three control cases, a few atrophic fibers had faint sarcoplasmic positivity; no other staining was seen. We conclude that ubiquitin is a component of the inclusions that characterize inclusion body myositis. However, ubiquitin expression in skeletal muscle disease is not pathognomonic of inclusion body myositis.     

A Built-in Self-Test Scheme with Diagnostics Support for Embedded SRAM

In this paper we propose a novel built-in self-test (BIST) design for embedded SRAM cores. Our contribution includes a compact and efficient BIST circuit with diagnosis support and an automatic diagnostic system. The diagnosis module of our BIST circuit can capture the error syndromes as well as fault locations for the purposes of repair and fault/failure analysis. In addition, our design provides programmability for custom March algorithms with lower hardware cost. The combination of the on-line programming mode and diagnostic system dramatically reduces the effort in design debugging and yield enhancement. We have designed and implemented test chips with our BIST design. Experimental results show that the area overhead of the proposed BIST design is only 2.4% for a 128 KB SRAM, and 0.65% for a 2 MB one.     

Control of free-radical emulsion polymerization of methyl methacrylate by oxygen injection. II. Experimental study

Oxygen injection has been proposed and experimentally demonstrated as an effective control measure for limiting the rate of heat release and altering the rate of polymerization in emulsion processes. A detailed mathematical model has been previously developed to describe the system behavior with and without oxygen injection. A simple lab scale apparatus was constructed and run extensively. Only trace quantities of oxygen are needed to inhibit the reaction completely. The facile response makes this method attractive for fast temperature control. However, because of the rapid penetration of dissolved oxygen into the polymer particles, growing radical chains are terminated prematurely, lowering product molecular weights. To minimize this detrimental effect, pulsed oxygen control is used and extensive experimental work was performed to determine the effects of controller set points on molecular weight. Moderate oxygen flows and moderate set point temperatures are found to give the optimal response without significant lowering of the final molecular weight. Injected quantities agree well with the order-of-magnitude sparging calculations needed to completely stop initiation. However, complete agreement between model simulations and experimental results was not reached due to an unmeasured loss of monomer from the reactor. Chain transfer to monomer is found to be important in modeling the polymer molecular weight. It has, however, a negligible effect on the reaction rate.     

Novel T-rail electrodes for substrate removed low-voltage high-speed GaAs/AlGaAs electrooptic modulators

A novel traveling-wave electrode utilizing capacitively loaded T-rail elements was developed for low-voltage high-speed substrate-removed GaAs/AlGaAs electrooptic modulators. Electrodes with varying dimensions were fabricated and characterized. Electrode phase velocity, characteristic impedance, loss coefficient, and capacitive loading were extracted from the measured s-parameters up to 40 GHz. Electrode was also simulated using a finite-element solver. The measured and calculated electrode capacitance values were found to be in excellent agreement, showing that the electrode can be precisely designed. Approaches were outlined to provide a group velocity-matched very high-speed modulator electrode suitable for a low drive-voltage substrate-removed GaAs/AlGaAs electro-optic modulator     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Treatment of essential arterial hypertension with hypercholesterolemia. Effects of an alpha-adrenergic blocker and an inhibitor of the angiotensin converting enzyme

BACKGROUND: Hypertension and hypercholesterolemia are frequently associated with this leading to considerable cardiovascular risk. METHODS: An open parallel randomized study was performed in which the effects of doxazosin, an alpha-adrenergic blocker and enalapril, an inhibitor of the angiotensin converting enzyme were compared in 70 patients with essential high blood pressure and plasma cholesterol levels greater than 240 mg/dl. Following 2-4 weeks of placebo administration the patients were randomly treated with one of the two drugs. When required doses were increased and hydrochlorothiazide added until blood pressure lower than 160/95 mmHg was achieved. After this period the patients were observed for a minimum of 8 weeks. The mean length of the study was of 22 weeks. RESULTS: Both drugs significantly reduced blood pressure without modifying cardiac frequency. Doxazosin tended to favorably modify the lipid profile of the plasma while enalapril significantly reduced the levels of cholesterol, lipids and high density lipoproteins (HDL). Upon termination of the study the total HDL/cholesterol index increased 8.6% in those treated with doxazosin and decreased 5.5% in those receiving enalapril (p < 0.05). CONCLUSIONS: Although doxazosin and enalapril are potent antihypertensive drugs, the effects on plasma lipid obtained with doxazosin indicate that a reduction in cardiovascular risk was achieved with this drug in the patients included in this study.     

Epidemiology of hepatitis C and G in sporadic and familial porphyria cutanea tarda

From 1995 to 1997, we prospectively evaluated the prevalence of hepatitis C virus (HCV) RNA in 124 patients with porphyria cutanea tarda (PCT) from Northern France (83 sporadic and 41 familial PCT). Serum samples were analyzed for ferritin, transaminases, HCV antibodies, and HCV RNA. In addition, genotyping of HCV and searches for HCV infection risk factors (blood transfusion, iv drug abuse, and surgical intervention) were performed. Twenty-six of 124 patients (21%; 95% CI: 13.9-28) were positive for serum HCV antibodies. All of them were also positive for HCV RNA. The prevalence of HCV infection was higher in the sporadic PCT group (26.5%, 22 out of 83) than in the familial PCT group (9.7%, 4 out of 41). Risk factors for hepatitis C infection were found to be significantly increased in the HCV-positive group when compared with the HCV-negative PCT group. In all HCV-positive patients with a risk factor, the suspected date of exposure to the virus always preceded the clinical onset of PCT. The HCV genotype pattern in PCT patients was similar to that observed in nonporphyric HCV patients in western European countries. Serum ferritin level was increased in both HCV-positive and HCV-negative porphyric patients. Transaminase levels were significantly higher in HCV-infected PCT patients. Sixty-seven out of 124 patients were retrospectively studied for hepatitis G virus (HGV) infection. Six of these 67 patients (8.9%; 95% CI: 2.1-15.8) were positive for HGV RNA. None of the six HGV-infected patients were positive for HCV RNA. The HGV-infected patients did not differ statistically from those without HGV infection with regard to age, ferritin, transaminase levels, and PCT treatment. These results support the view that sporadic cases of HGV infection may occur frequently. This study of a large cohort of HCV and PCT patients further documents an increasing gradient in HCV prevalence from northern to southern Europe, and shows that HCV infection acts as a triggering factor of PCT. Finally, the HGV prevalence found in the PCT patients was comparable with that found in French blood donors, suggesting that HGV is not a PCT triggering factor.