Surface crosslinking of high‐density polyethylene beads in a modified plasma reactor

High‐density polyethylene (HDPE) beads were successfully surface‐crosslinked in a modified plasma reactor. The modified plasma reactor treats large amounts of beads, which are uniformly surface‐crosslinked. In this study, effects of the gas pressure, radio‐frequency (RF) power, and the treatment time on the degree of surface crosslinking were systematically investigated. Degree of surface crosslinking was measured by solvent extraction method (boiling xylene method, BXM). The gel content of plasma‐treated HDPE increases from 0.0 to 1.05% within 10 min at 100 mTorr, 200 W. FTIR and DSC analyses show that the crosslinked layer after plasma treatment is limited only at HDPE surface without changing the bulk thermal property of HDPE. Through the analysis of FTIR, it was confirmed that main peaks corresponding to CH₂ bands were decreased and two peaks corresponding to CF₂ and CF₃ were observed after plasma surface modification. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2921–2929, 2002; DOI 10.1002/app.10295     

Thermal behavior and the determination of the polymer-polymer interaction parameter of polycarbonate and a thermotropic liquid crystalline polymer blends

Summary The surface modification of low-density polyethylene(PE) by liquid phase photograft polymerization with acrylic acid(AA), acrylamide(AM) and glycidyl methacrylate(GMA) was described. The grafting of AA and AM was proved and characterized by electron spectroscopy for chemical analysis(ESCA). It was found that fully hydrophilic surface can be obtained in very short irradiation time. With ESCA and attenuated total reflection infrared spectroscopy(ATR-IR), it can be confirmed that bifunctional monomer GMA was grafted onto the PE film surface. Through further reaction with GMA grafted film, heparin and protamine were immobilized onto the grafted film surface.     

Development of refinery scheduling system using mixed integer programming and expert system

This paper presents a hybrid refinery scheduling system combining mathematical programming model and expert system. Mixed-integer linear programming models for crude oil movement between units are merged into the expert system that is for qualitative issues concerning crude vessel unloading operations. The target problem ranging from the crude unloading to the crude charging to distillation towers is decomposed into several module problems for efficiency. Compared with existing scheduling approaches for oil movement, the proposed hybrid refinery scheduling system is very effective in dealing with timing decisions involving vessel unloading operations due to the advantages of an expert system. Since the proposed scheduling system can generate solutions so fast, it is expected to play a key role in the real processes. This paper is dedicated to Professor Wha Young Lee on the occasion of his retirement from Seoul National University.     

Wet oxidation of wastewater containing hydrocarbons by novel supported Pd catalysts

Pd catalysts supported on TiO₂, ZrO₂, ZSM-5, MCM-41 and activated carbon were used in catalytic wet oxidation of hydrocarbons such as phenol, m-cresol and m-xylene. It was found that the Pd/TiO₂ catalyst was highly effective in the wet oxidation of hydrocarbon. The activities of catalysts with various hydrocarbon species, catalyst support, oxidation state of catalyst performed in a 3-phase slurry reactor show that reaction on Pd surface is more favorable than that in aqueous phase and that the active site is oxidized Pd in catalytic wet air oxidation of hydrocarbons. Based on the experimental results, a plausible reaction mechanism of wet oxidation of hydrocarbons catalyzed over Pd/TiO₂ catalyst was proposed. This catalyst is superior to other oxide catalysts because it suppressed the formation of hardly-degradable organic intermediates and polymer.     

Decane reforming reaction over Pt,Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on Y-zeolite

Pt, Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on NaY- and HY-zeolite were examined as a catalyst for producing gasoline from n-decane via simultaneous reforming and cracking. The catalysts were prepared by calcining and reducing metal-ion-exchanged Y-zeolite with O₂ and H₂ at 300°C., respectively. Thus prepared catalysts were characterized by hydrogen chemisorption and temperature programmed desorption of ammonia. Pt-Ni/NaY and Pt-Ir/NaY bimetallic catalysts offered the improved activity maintenance compared to Pt/NaY monometallic catalyst. The catalysts supported on HY-zeolite showed higher selectivity toward C₅–C₇ and skeletal isomers of C₅–C₇- and C₈–C₁₀ than those of the catalysts supported on NaY-zeolite, which is a desired characteristic for increasing octane value of gasoline these days. However, deactivation with reaction time was much more pronounced on HY-zeolite-supported catalyst. When the catalyst was prcsulfided with H,S, the stability with time on stream was enhanced and the selectivity was quite different from that of the catalyst before presulfiding. The acidity of Y-zeolite and presulfiding of catalyst greatly influenced the activny, selectivity and stability of Pt, Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on Y-zeolite in n-decane reforming reaction.     

Effect of temperature on polymer migration II: Concentration equation

Polymer migration is a generally well-known phenomenon in a flow field, and it has been verified that the sources of such phenomena are nonhomogeneity of the flow, concentration effects and hydrodynamic interactions between the polymer molecules. In addition, temperature effects were found to be another source of polymer migration. The Langevin equation for a polymer molecule was first derived from single chain dynamics using a kinetic theory for the bead-spring elastic harmonic dumbbell model, as described in part I (reference [1]). In this paper the diffusion equation and concentration profile of the polymer molecules induced by a temperature gradient are obtained from the Fokker-Planck equation. A new differential operator is also introduced to calculate the concentration profile. From the concentration equation obtained in the general flow geometry, we find that in dilute polymer solution there are significant effects on the polymer migration not only due to the nonhomogeneity of the flow field but also due to temperature gradients.     

A novel layered Li [Li0.12NizMg0.32−zMn0.56]O2 cathode material for lithium-ion batteries

Layered Li[Li_0.12Ni_zMg_0.32−zMn_0.56]O₂ oxide cathodes containing lithium atoms in the transition metal layers were synthesized and characterized using X-ray diffraction (XRD), galvanostatic cycling, and differential scanning calorimetry (DSC). The Li[Li_0.12Ni_zMg_0.32−zMn_0.56]O₂ cathodes deliver a specific discharge capacity of about 190 mAh/g at room temperature and 236 mAh/g at 55 °C when cycled between 2.7 and 4.6 V versus Li/Li⁺. Excellent capacity retention and smooth potential profiles at room and elevated temperatures over extended cycles suggest that this material does not convert into a spinel structure.     

Characteristics of selective adsorption using D-phenylalanine imprinted terpolymer beads

A D-Phenylalanine (Phe) imprinted terpolymer, Polyacrylonitrile-Poly(acrylic acid)-Poly(acryl amide) (Poly(AN-AA-AAm)) bead was prepared by the wet-phase inversion method. Acrylamide (AAm) and acrylic acid (AA) were used as the functional monomer and acrylonitrile (AN) was used as a physical cross linker. The characteristics of selective adsorption by the D-Phe imprinted terpolymer beads were investigated at high concentrations of Phe racemate solution, 1 g Phe/L, and 10 g Phe/L. The adsorption selectivity of the D-Phe imprinted terpolymer beads prepared by anin-situ implanting method reached 0.82 and 0.8 at 1.0 g and 10 g Phe/L racemate solution, respectively, and almost all of the adsorbed D-Phe and about 43% of the adsorbed L-Phe were desorbed by 4% acetic acid. The uptake capacities of the terpolymer beads were maintained for several repeated batches.     

Thermodynamic Analysis of Chemical Vapor Deposition of BN + AIN Composite Coatings

Thermodynamic calculations were performed using a modified solgasmix-pv computer program in order to study the feasibility of codepositing boron nitride (BN) plus aluminum nitride (AIN) by chemical vapor deposition. Reactants considered were AICl₃, BCl₃ or B₂H₆, NH₃, and H₂. Deposition diagrams were generated for the BCl₃-AICl₃-NH₃ system over a range of processing conditions such as temperature, total system pressure, and reagent concentrations. Codeposition of BN + AIN was predicted by the calculations for temperatures in the range of 900 to 1700 K and pressures of 10.13 to 101.3 kPa. The predicted deposition efficiency at equilibrium was much higher for BN than for AlN at most reagent compositions. The AlN deposition efficiency increased with decreasing temperature and decreasing BCl₃ content, with increasing NH₃ content, or with the addition of H₂. Aluminum chlorides were found to be the dominant gaseous species.     

Investigations of Electrical Properties in Silica/Indium Tin Oxide Two-Layer Film for Effective Electromagnetic Shielding

The effect of zinc ions added to silica film on the electrical and structural properties of a silica/indium tin oxide two-layer film which had been prepared by solution coating for electromagnetic shielding of displays was studied. The volume resistivity of the undoped silica/indium tin oxide film was more than 3 times as high as that of the zinc-doped silica/indium tin oxide film. The addition of divalent cations, zinc ions, to the overcoated layer led volume resistivity of the two-layer film to decrease significantly and also caused a long-term increase in stability. The decrease in volume resistivity was due to the addition of zinc ions that changed the interface ionization and helped to enhance the electrical conductivity in the two-layer film.