Trace elements in particles of motor vehicle exhaust in Shanghai

A nuclear microprobe with high spatial resolution and high analytical sensitivity was applied to analyze trace elements,especially lead,in vehicle exhaust of Shanghai city.The result shows that the chemical composition and its corresponding x-ray relative intensity are different among different vehicle exhausts.There are many kinds of metal elements in particles of vehicle exhaust.most are harmful to people,such as Ti,Cr,Mn,Pb,etc.We found that the lead concentration was 6820μg/g and the bromine concentration was 5300μg/g in the exhaust from Santana using leaded gasoline(SULG).which is higher than any other kinds of vehicle exhausts.We have also detected the minimum lead in the particles of unleaded gasoline and its content varies from one to another.Its mean concentration was 450μg/g and the highest reached 6210μg/g.The unleaded gasoline‘s Pb existed in the whole particle while the leaded gasoline‘s enriched in the surface of the particle and was more harmful to the human beings.     

首钢外购焦炭质量恶化后的高炉生产实践

针对焦炭质量劣化的状况，高炉操作以活跃炉缸为主，从上下部调剂入手，采取疏导煤气、控制合理的实际风速和鼓风动能、缓解焦炭在高温区的粉化等措施，有效地改善了高炉的顺行状况，并逐步恢复高炉指标。     

"大学城"建设的冷思考

基于大学校园建设实践,分析目前新校园建设中存在的共性问题,并为校园建设发展提出若干建议。     

狭小场地条件下大跨度预应力混凝土拱板的运输及吊装

介绍了大跨度预应力混凝土拱板在狭小场地条件下的起模、运输及空间滑移吊装的方法，经在众多中直粮库中的应用，证明该方法简单、适用、经济。     

In-Situ observation on microfracture behavior ahead of the crack tip in 63Sn37Pb solder alloy

in-situ transmission electron microscopy (TEM) tensile tests on as-cast and aged 63Sn37Pb solder alloys were conducted, and the fracture behavior in nanometer scale ahead of the crack tip was inspected and discussed. Results show that the fracture was completed by connecting the discontinuous cracks or voids. Dislocation behavior was concentrated along the grain boundaries for as-cast samples, and displayed mainly as dislocation climb. The crack was intergranular dominated under the lower strain rate. While remarkable mutual dislocation emission was detected in the aged solder. Transgranular cracks were dominant in the fractured area, and they propagated by linking up with the nanometer scale cracks ahead of the crack tips under the effective promotion of the inverse dislocation emission. At the same time, the partial interphase or intergranular cracks in the thinned area were also found. Under this condition, a new critical stress intensity factor K _c ^′ to define the mutual dislocation emission was proposed.     

安徽省水资源宏观经济优化模型研究

以水资源可持续发展为出发点,探讨了一种可以同时兼顾经济发展、水资源利用和社会效益的多目标水资源宏观经济模型的建立方法,通过引入带权2-模评价函数,将多目标优化问题转变成单目标优化问题。以2002年为现状水平年,对安徽省2010年的产业结构及产业规模进行优化分析。结果表明,多目标模型求得的总用水量较单目标模型明显降低,而两模型优化的产业规模与结构差别不大,体现了高用水效率行业优先发展的要求。     

基于FLUENT软件的管式搅拌反应器流场的数值模拟

运用商业计算流体力学(CFD)软件FLUENT对一种新型管式搅拌反应器进行流场模拟,用GAMBIT建立流场实体模型,采用标准k-ε湍流模型以及多重参考系法(MRF)处理搅拌桨区.结果表明,计算所选模型能较准确地预测搅拌反应器的速度场、压力场及湍流动能分布,考察流量为1 m3/h时不同搅拌转速对反应器内部混合的影响,此时对应的最佳搅拌转速为50 rpm左右.模拟结果将为实验研究提供适当的操作参数,对搅拌反应器的优化和放大具有一定参考价值.     

印染废水处理工艺研究及实例

本文简要介绍了印染废水水质特征,提出了处理工艺,并利用两个工程实例说明了该工艺的可行性.