Identification of estrogenic compounds emitted from the combustion of computer printed circuit boards in electronic waste

Rapid changes in technology have brought about a surge in demand for electronic equipment. Many of these products contain brominated flame-retardants (BFRs) as additives to decrease the rate of combustion, raising concerns about their toxicological risk. In our study, emissions from the combustion of computer-printed circuit boards were evaluated in the T47D-KBluc estrogen-responsive cell line at a series of concentrations. There was significant activity from the emission extract when compared to the positive control, 0.1 nM estradiol. After HPLC fractionation, GC/MS identified ten chemicals which included bisphenol A; the brominated derivates mono-, di-, and tribisphenol, triphenyl phosphate, triphenyl phosphine oxide, 4'-bromo-[1,1'-biphenyl]-4-ol,3,5-dibromo-4-hydroxybiphenyl,3,5-dibromo-2-hydroxybiphenyl, and the oxygenated polyaromatic hydrocarbon benzanthrone. Commercially available samples of these ten compounds were tested. The compound 4'-bromo-[1,1'-biphenyl]-4-ol resulted in dose-dependent significant increases for luciferase activity at concentrations ranging from 0.1 to 10 microM in the T47D-KBluc assay. The chemical also demonstrated an affinity for binding to the estrogen receptor (ER) with an IC50 of 2 x 10(-7) M. To determine the uterotrophic activity, three doses (50, 100, and 200 mg/kg/day) of 4'-bromo-[1,1'-biphenyl]-4-ol were administered to adult ovariectomized Long-Evans rats for 3 days. Treatment of the animals with 200 mg/ kg/day showed an increase in uterine weight Hence one new chemical, released by burning of electrical wastes, was identified which displays estrogenic activity both in vitro and in vivo. However, it was about 1000-fold less potent than ethynyl estradiol.     

Performance of lactating dairy cows fed silage and grain from a maize hybrid with the cry1F trait versus its nonbiotech counterpart

Effects of feeding grain and maize silage from a non-Bt maize and a variety of Bt maize that contains cry1F (event TC1507, event DAS-Ø15Ø7-1), a gene that provides maize with insect resistance, on the health and performance of dairy cows were evaluated. In a crossover trial, 20 lactating Holstein cows were assigned to each of 2 dietary treatment groups and fed diets containing whole-plant maize silage plus maize grain from TC1507 or its near-isoline counterpart (control). Each period of the crossover trial lasted 28 d and was preceded by a 7-d adjustment period. To minimize variability due to stage of lactation, 2 blocks of 10 cows at 90 to 130 d of lactation at the start of the trial were used. Within each dietary treatment, 10 cows were from each of 2 genetic selection lines (high and average fat plus protein predicted transmitting ability). Diets were formulated to be isocaloric and isonitrogenous. Dry matter intake and daily production of milk, fat, protein, lactose, nonfat solids, and total solids did not differ between cows fed the TC1507 diet and cows fed the control diet. Furthermore, milk from cows in different dietary treatment groups did not differ in milk urea nitrogen concentration or somatic cell count. For milk fat percentage, a significant dietary treatment by genetic group interaction was detected although overall yield of milk and solids-corrected milk did not differ with diet. Physical measures of cow health including body weight, body condition score, temperature, pulse, and respiration rate were collected weekly; dietary treatment group means for these measures were not different. Blood chemistry and hematological analyses were conducted using blood samples collected from cows before the start of the trial and at the end of each period. Overall, the TC1507 and control groups did not differ in any of these indices of health status. Further, hematological profiles for cows in the dietary treatment groups were not different. In summary, no differences were detected in milk production, milk composition, or cow health as indicated by physical measures, blood chemistry, and hematological analyses between dairy cows fed diets containing maize grain plus whole-plant maize silage from TC1507 and dairy cows fed grain plus silage from its near-isoline counterpart.     

Stress–Strain Characteristics of Tin-Based Solder Alloys for Drop-Impact Modeling

The stress–strain properties of eutectic Sn-Pb and lead-free solders at strain rates between 0.1 s⁻¹ and 300 s⁻¹ are required to support finite-element modeling of the solder joints during board-level mechanical shock and product-level drop-impact testing. However, there is very limited data in this range because this is beyond the limit of conventional mechanical testing and below the limit of the split Hopkinson pressure bar test method. In this paper, a specialized drop-weight test was developed and, together with a conventional mechanical tester, the true stress–strain properties of four solder alloys (63Sn-37Pb, Sn-1.0Ag-0.1Cu, Sn-3.5Ag, and Sn-3.0Ag-0.5Cu) were generated for strain rates in the range from 0.005 s⁻¹ to 300 s⁻¹. The sensitivity of the solders was found to be independent of strain level but to increase with increased strain rate. The Sn-3.5Ag and the Sn-3.0Ag-0.5Cu solders exhibited not only higher flow stress at relatively low strain rate but, compared to Sn-37Pb, both also exhibited higher rate sensitivity that contributes to the weakness of these two lead-free solder joints when subjected to drop impact loading.     

Turbidity Model for Ashokan Reservoir, New York: Case Study

Terrigenous inorganic particles delivered during runoff events cause problems of high turbidity in many lakes and reservoirs. A turbidity model, composed of a two-dimensional hydrothermal/transport submodel and a turbidity submodel, is developed and tested for Ashokan Reservoir, New York, that experiences elevated turbidity levels following runoff events. A robotic monitoring network, rapid profiling instrumentation, and individual particle analyses are used to support the modeling, by specifying turbidity loads and in-reservoir patterns and features of the particles that guided representation of settling. The turbidity-causing particles are clay minerals, 1–10?μm in diameter. The hydrothermal/transport submodel that serves as the physical framework for the overall model, was separately validated for a 13-year period. The turbidity submodel considered three particle-size/settling velocity classes of turbidity, consistent with the independent individual particle characterizations. Robust performance is demonstrated for the overall turbidity model, as it simulates well the wide range of patterns observed in the reservoir and withdrawal, associated with a number of major runoff events from the same 13-year period. The model will be used to support forecasting in the evaluation of management alternatives intended to abate the problem.     

Calibrating a Structured Light Stripe System: A Novel Approach

The problem associated with calibrating a structured light stripe system is that known world points on the calibration target do not normally fall onto every light stripe plane illuminated from the projector. We present in this paper a novel calibration method that employs the invariance of the cross ratio to overcome this problem. Using 4 known non-coplanar sets of 3 collinear world points and with no prior knowledge of the perspective projection matrix of the camera, we show that world points lying on each light stripe plane can be computed. Furthermore, by incorporating the homography between the light stripe and image planes, the 4 × 3 image-to-world transformation matrix for each stripe plane can also be recovered. The experiments conducted suggest that this novel calibration method is robust, economical, and is applicable to many dense shape reconstruction tasks.     

Sodium sulphite effects on recovery and composition of detergent fibre and lignin from forage legumes varying in levels of proanthocyanidins

Alfalfa (Medicago sativa L), red clover (Trifolium pratense L), birdsfoot trefoil (Lotus corniculatus L), sainfoin (Onobrychis viciifolia Scop), crownvetch (Coronilla varia L), cicer milkvetch (Astragrlus cicer L), sericea lespedeza (Lespedeza cuneata (Dum-Cours) G Don) and kura clover (Trifolium ambiguum M Bieb) were subjected to sequential detergent fibre analysis to investigate the effects that the addition of sodium sulphite to neutral detergent has on the recovery and composition of fibre and lignin from forage legumes that vary in levels of proanthocyanidin (PA). Soluble, insoluble and neutral detergent insoluble PA (NDIPA) concentrations were highest in sericea, moderate in crownvetch, sainfoin and birdsfoot trefoil and absent in alfalfa, cicer milkvetch, red clover and kura clover. Addition of sodium sulphite reduced levels of neutral detergent fibre (NDF), acid detergent fibre (ADF), acid detergent lignin (ADL), neutral detergent insoluble nitrogen (NDIN) and acid detergent insoluble nitrogen (ADIN) recovered from most forages tested. The addition of sodium sulphite effectively eliminated NDIPA from NDF. The difference between fibre fractions prepared without and with the addition of sodium sulphite during the neutral detergent procedure was related to PA concentration. Neutral detergent fibre difference was positively correlated with soluble PA (r = 0.730, p = 0.0001), insoluble PA (r = 0.905, p = 0.0001) and NDIPA (r = 0.913, p = 0.0001). Acid detergent fibre difference was positively correlated with soluble PA (r = 0.796, p = 0.0001), insoluble PA (r = 0.976, p = 0.0001) and NDIPA (r = 0.974, p = 0.0001). Acid detergent lignin difference was positively correlated with soluble PA (r = 0.846, p = 0.0001), insoluble PA (r = 0.992, p = 0.0001) and NDIPA (r = 0.972, p = 0.0001). Neutral detergent insoluble nitrogen difference was positively correlated with soluble PA (r = 0.475, p = 0.0255), insoluble PA (r = 0.579, p = 0.0047) and NDIPA (r = 0.570, p = 0.0056). Acid detergent insoluble nitrogen difference was positively correlated with soluble PA (r = 0.798, p = 0.0001), insoluble PA (r = 0.969, p = 0.0001) and NDIPA (r = 0.979, p = 0.0001). Sodium sulphite has large effects on fibre values of PA-containing species. Our results suggest that the difference between fibre fractions prepared with and without the addition of sulphite to neutral detergent may be used to determine the effects of PA on protein solubility in detergents. © 1999 Society of Chemical Industry     

Secretion of recombinant human IgE-Fc by mammalian cells and biological activity of glycosylation site mutants

We have constructed an expression vector that leads to secretionof the whole Fc of human immunoglobulin E (hIgE-Fc) from mammaliancells at levels up to 100 mg/l of culture. Two surface glycosylationsites at Asn265 and Asn371 have been changed to glutamine, toobtain a more homogeneous preparation of hIgE-Fc for structuralstudies. Comparison of wild-type and mutant products revealedthat Asn371 is rarely glycosylated in Chinese hamster ovarycells. Both the double mutant and wild-type hIgEFc bind to thehigh-affinity IgE receptor, FcRI, with about the same affinityas myeloma IgE (K_a in the range 10¹⁰–10¹¹ M^–1),and were able to sensitize isolated human basophils for anti-IgEtriggering of histamine release. However, only the double mutanthIgE-Fc approached the affinity of myeloma IgE for the low-affinityreceptor, FcRII (K_a = 7.3x10⁷ M^–1), whereas the wild-type hIgE-Fc bound with a 10-fold lower affinity (K_a = 4.1x10⁶M^–1).     

The phosphorus content of fluvial sediment in rural and industrialized river basins

The phosphorus content of fluvial sediment (suspended sediment and the < 63 microm fraction of floodplain and channel bed sediment) has been examined in contrasting rural (moorland and agricultural) and industrialized catchments in Yorkshire, UK. The River Swale drains a rural catchment with no major urban and industrial areas, and the total phosphorus (TP) content of fluvial sediment is generally within the range 500-1,500 microg g(-1). There is little evidence of any major downstream increase in TP content. In contrast, fluvial sediment from the industrialized catchments of the Rivers Aire and Calder exhibits both higher levels of TP content and marked downstream increases, with values of TP content ranging from < 2,000 microg g(-1) in headwater areas upstream of the main urban and industrial areas, to values > 7,000 microg g(-1) at downstream sites. These elevated levels reflect P inputs from point sources, such as sewage treatment works (STWs) and combined sewer overflows. The influence of STWs is further demonstrated by the downstream increase in the inorganic P/organic P ratio from < 2 in the headwaters to > 4 in the lower reaches. Comparison of the P content of suspended sediment with that of the <63 microm fraction of potential source materials suggests that topsoil from upland moorland/pasture and from cultivated areas, and channel bank material are likely to be the main sources of particulate P (PP) in the River Swale and in the headwaters of the Rivers Aire and Calder. In the middle and lower reaches of the Rivers Aire and Calder, inputs associated with urban and industrial land uses, such as STWs, industrial effluents and street dust, are likely to represent the dominant sources of PP. During high flow events, such urban inputs may be diluted by inputs from moorland and agricultural land in the headwaters. Consequently, for all three rivers, there are inverse relationships between the TP content of suspended sediment and both discharge and suspended sediment concentration, reflecting changes in sediment and P sources during high flow events. Spatial variations in the P contents of the < 63 microm fraction of overbank floodplain deposits and channel bed sediment evidence a similar pattern as those for suspended sediment, with relatively low levels of TP in the River Swale and elevated levels in the middle and downstream reaches of the Rivers Aire and Calder. The PP concentrations associated with floodplain and channel bed sediment are, however, lower than equivalent values for suspended sediment, and this primarily reflects the differences in the particle size composition between the three types of sediments. Rates of floodplain deposition and the amounts of fine-grained sediment stored in the river channels are relatively high, and suggest that such environments may represent important sinks for PP. Based on the sediment samples collected from the study basins, a simple four-fold classification which relates the TP content of suspended sediment to upstream land use has been established. Both the range and the absolute values of TP content tend to increase with an increase in the level of urbanization and industrialization.