Selective detection of acetylene gas extracted from isolation oil by an electrochemical sensor using a gold electrode

The selective detection of acetylene in gases extracted from isolation oils has been studied to develop an electrochemical sensor for the diagnostic monitoring of the condition of in-service electrical instruments. Effects of coexisting gases (CH₄, C₂H₆, C₂H₄, H₂ and CO) on the oxidation current of C₂H₂ were tested using gas-permeable gold-coated and platinum-black electrodes as the sensor. The gold-coated electrode showed good behaviour for the selective current detection of acetylene under potentiostatic conditions (−0.1 V/Pt-black reference electrode) in 10m H₂SO₄ electrolyte solution.     

The polymerization and copolymerization of nitroalkyl acrylates and nitroalkyl methacrylates

Nitroalkyl acrylates and methacrylates involving some new compounds were prepared. The homopolymerization of these monomers in toluene and their copolymerization with styrene in acetone were carried out with azobisisobutyronitrile as initiator. The rate of polymerization of the nitroalkyl acrylates showed a correlation with the number of nitro groups situated on the ester side chain. The apparent activation energies of the polymerization were found to be 22.0–27.5 kcal./mole for the nitroalkyl acrylates and about 11.5–13.0 kcal./mole for the nitroalkyl methacrylates. From the reactivity ratios and Q-e values of the copolymerization the following information was obtained. The copolymerization behavior of nitroalkyl acrylates and methacrylates showed an alternating tendency, and these monomers belong to the conjugative monomer groups. On the reactivities of these monomers, the polarity of vinyl group was affected a little by nitro group of ester bond side, and the resonance affected little. These monomers were crosslinked with 2-methyl-2-nitro-1,3-propylene diacrylate. Some of the polymers showed marked improvement in the physical properties of elastomers.     

小鹰500飞机获颁型号许可证

中国民用航空局向中航通飞华北飞机工业有限公司颁发了小鹰500飞机型号合格证（TC证）。这标志着中航通色华北公司将完全拥有了小鹰500飞机设计、制造知识产权。     

Texture of primary recrystallization on nonoriented electrical steel sheet with phase transformation

The magnetic properties of nonoriented (NO) electrical steel sheet are commonly improved if the texture of their products possesses “cube texture” (e.g., {100 〈0vw〉, “goss texture”) (i.e., 110〈011〉, and less 222 texture). Industrially “cube type” has not been obtained, but “goss texture” has been. In a greater or lesser degree, {222} texture exists. To improve “goss texture” and reduce 222 texture, the grain size of the material prior to cold rolling should be larger. When the grain size before cold rolling is larger, during primary recrystallization, “goss texture” is enriched, 222 texture is decreased, and the grain grows so easily that higher induction and lower core loss can be obtained. This does not depend on the presence of phase transformation. In case of NO steel with phase transformation, heat treatment before cold rolling has been done below the austenite transition temperature (Acin1) in order to prevent the fine grain size caused by α → γ(+α) → α transformation. By using material that was heated over Acin1 and cooled with changing cooling rates, this study describes (a) the relationship between textures before cold rolling and the texture of the final product, and (b) the development of the magnetic properties.     

Influence of chromium on the local structure and morphology of ferric oxyhydroxides

The extended X-ray absorption fine structure (EXAFS) method and transmission electron microscopy (TEM) have been used for characterizing the local structure and morphology of ferric oxyhydroxides, α-FeOOH and γ-FeOOH, with and without chromium. These ferric oxyhydroxide powders were prepared from aqueous solutions containing iron and chromium ions. Radial structural functions for iron obtained by Fe K edge EXAFS spectra showed that the linkage of structural units formed by FeO₆ octahedra in γ-FeOOH is distorted by chromium addition, while such distortion in α-FeOOH is not clearly detected. On the other hand, Cr K edge EXAFS spectra showed that the local structure around chromium does not necessarily correspond to the local structure around of iron, which is observed by Fe K edge EXAFS spectra. This suggests that the structural units containing iron and chromium are heterogeneously distributed in these ferric oxyhydroxides. The local structural information was discussed coupled with morphological features of these ferric oxyhydroxides observed by TEM.     

Implicit Formulation for SPH‐based Viscous Fluids

We propose a stable and efficient particle‐based method for simulating highly viscous fluids that can generate coiling and buckling phenomena and handle variable viscosity. In contrast to previous methods that use explicit integration, our method uses an implicit formulation to improve the robustness of viscosity integration, therefore enabling use of larger time steps and higher viscosities. We use Smoothed Particle Hydrodynamics to solve the full form of viscosity, constructing a sparse linear system with a symmetric positive definite matrix, while exploiting the variational principle that automatically enforces the boundary condition on free surfaces. We also propose a new method for extracting coefficients of the matrix contributed by second‐ring neighbor particles to efficiently solve the linear system using a conjugate gradient solver. Several examples demonstrate the robustness and efficiency of our implicit formulation over previous methods and illustrate the versatility of our method.     

Touch‐screen panel integrated into 12.1‐in. a‐Si:H TFT‐LCD

Abstract— A touch‐screen‐panel (TSP) embedded 12.1‐in. LCD employing a standard existing a‐Si:H TFT‐LCD process has been successfully developed. Compared with conventional external touch‐screen panels, which use additional components to detect touch events, the new internal TSP exhibits a clearer image and improved touch feeling, as well as increased sensing speed using discrete sensing lines to enable higher‐speed sensing functions including handwriting. The new internal digital switching TSP can be fabricated with low cost because it does not require any additional process steps compared to a standard a‐Si:H TFT‐LCD.     

TransCAIP: A Live 3D TV System Using a Camera Array and an Integral Photography Display with Interactive Control of Viewing Parameters

The system described in this paper provides a real-time 3D visual experience by using an array of 64 video cameras and an integral photography display with 60 viewing directions. The live 3D scene in front of the camera array is reproduced by the full-color, full-parallax autostereoscopic display with interactive control of viewing parameters. The main technical challenge is fast and flexible conversion of the data from the 64 multicamera images to the integral photography format. Based on image-based rendering techniques, our conversion method first renders 60 novel images corresponding to the viewing directions of the display, and then arranges the rendered pixels to produce an integral photography image. For real-time processing on a single PC, all the conversion processes are implemented on a GPU with GPGPU techniques. The conversion method also allows a user to interactively control viewing parameters of the displayed image for reproducing the dynamic 3D scene with desirable parameters. This control is performed as a software process, without reconfiguring the hardware system, by changing the rendering parameters such as the convergence point of the rendering cameras and the interval between the viewpoints of the rendering cameras.     

Robust control method for the inverted pendulum system with structured uncertainty caused by measurement error

In this article, we propose a design method for an inverted pendulum system with a structured uncertainty. We consider that such an uncertainty is caused by a measurement error in the rotation angle of the pendulum and effects on the system structure that cannot be included in the nominal elements. For the uncertain system obtained, we apply an integral tracking control and the guaranteed cost control to design a robust, stable, tracking control system. Finally, we show the effectiveness of our method through a numerical example.     

Preparation of transparent,electrically conducting ZnO film from zinc acetate and alkoxide

Very uniform and transparent zinc oxide thin films doped with aluminium and indium were fabricated by the dip-coating technique using solutions prepared by the ethanolamine method. As starting materials, zinc acetate and zinc n-propoxide were used. Zinc acetate and propoxide are soluble in PrⁱOH in the presence of diethanolamine, although they are hardly soluble without the amine. The prepared solutions were very stable and suitable for dip-coating. Zinc oxide was crystallized by heating above 500 °C, and doping of aluminium and indium retarded the crystallization. The electrical resistivity of the film was decreased by doping with aluminium and indium. The lowest resistivity of 2 × 10^–2 cm was obtained by post-coating treatment in a nitrogen atmosphere.