Sulfonated poly(ether ketone ketone) ionomers as proton exchange membranes

Sulfonated poly(ether ketone ketone) ionomers (SPEKK) with ion‐exchange capacities (IEC) between 0.2 and 3.4 meq/g were prepared by sulfonating PEKK with a mixture of concentrated and fuming sulfuric acids. Sulfonation occurs only on the phenyl rings attached to ether and ketone groups. The glass transition temperature of the dry SPEKK ionomers increased linearly with increasing IEC, and the ionomers were thermally stable to ～250°C, above which desulfonation occurred. Water‐swollen ionomers exhibited microphase separated morphologies, and the average correlation length determined by small angle X‐ray scattering increased with increasing IEC. The proton conductivity of hydrated SPEKK membranes measured by impedance spectroscopy ranged from ～10^–3 to 10^–1 S/cm as the IEC increased from ～1.0 to 2.4 meq/g. Single cell performance curves on membrane‐electrode assemblies (MEA) indicated that the SPEKK membranes approached the performance of Nafion? for an IEC of 2 meq/g. POLYM. ENG. SCI., 45:1081–1091, 2005. © 2005 Society of Plastics Engineers     

Understanding heterogeneous catalysis on an atomic scale: a combined surface science and reactivity investigation for the dehydrogenation of ethylbenzene over iron oxide catalysts

In order to study the dehydrogenation of ethylbenzene to styrene, epitaxial iron oxide model catalyst films with Fe₃O₄(111), -Fe₂O₃(0001) and KFe _x O _y (111) stoichiometry were prepared in single crystal quality on Pt(111). They were investigated using surface science techniques before and after atmospheric pressure reaction experiments in a newly designed single crystal flow reactor. As expected from low-pressure measurements, Fe₃O₄(111) is catalytically inactive. The catalytic activity of -Fe₂O₃(0001) starts after an activation period of about 45 min. After that, the surface is essentially clean but shows a high concentration of defects. On the potassium-promoted films, however, the activation period is much longer, the activity then is higher and the surface gets covered completely with carbon and oxygen during reaction. This indicates a different reaction pathway on the promoted films with a carbon–oxygen species as catalytically active species.     

Evidence for non-site-isolation in ZSM-5 from ion-exchange and catalytic studies

Ion exchange of HZSM-5 samples with alkali metal cations, using metal chloride solutions, results in partially exchanged zeolites, MHZSM-5, M = Li, Na, K or Cs. The degree of exchange is found to increase with increasing ionic radius of the cations. The catalytic properties of the alkalized zeolites were evaluated using the reaction conditions under which the catalytic activity of the HZSM-5 samples in terms of n-hexane cracking is proportional to the aluminium content. From the residual catalytic activity exhibited by the Na-, K- and CsHZSM-5 samples it is concluded that each of the larger Na⁺, K⁺ and Cs⁺ ions is influencing more than one AlO ₄ ^– tetrahedron, implying that the aluminium sites in ZSM-5 are not isolated. The ion-exchange results are then interpreted in terms of non-isolated aluminium sites. The ion-exchange and catalytic properties of the zeolites as a function of aluminium content are also discussed.     

Multimer formation as a consequence of separate homodimerization domains: the human c-Jun leucine zipper is a transplantable dimerization module

Human c-Jun and c-Fos leucine zipper domains were examined fortheir ability to serve as autonomous dimerization domains aspart of a heterologous protein construct. Schistosoma japonicumglutathione S-transferase (GST) was fused to recombinant Junleucine zipper (rJunLZ) and Fos leucine zipper (rFosLZ) domains.SDS–PAGE ‘snapshot’ analyses based on disulphidelinkage of monomers demonstrated the ability of rJunLZ to functionas a dimerization motif in a foreign protein environment. Sterichindrance prevented formation of rJunLZ–GST::rFosLZ–GSTheterodimers whereas rJunLZ–GST::rFosLZ and rJunLZ::rFosLZ–GSTformed readily. Furthermore, rJunLZ–GST generated homodimerssuggesting fusion protein heterodimers interact differentlyto homodimers. Gel filtration chromatography confirmed thatGST is a dimer in solution and that attachment of a leucinezipper domain allows further interactions to take place. Sedimentationequilibrium analyses showed that GST is a stable dimer (K_a >10⁶ M^-1) with no higher multimeric forms. rFosLZ–GST weaklyassociates beyond a dimer (K_a {small tilde}4x10⁵ M^-1) and rJunLZ–GSTassociates indefinitely (K_a {small tilde}4x10⁶ M^-1), consistentwith an isodesmic model of association. The interaction of theseleucine zippers independently of GST association demonstratestheir utility in the modification of proteins when multimerformation is desired.     

Electric cadavers, 'metiphor,' and other medical software marvels

"Grateful Med," "Fluids," "Metiphor," virtual reality, and electric cadavers are just some of the programs and buzzwords in the futuristic world of medical software affecting many areas of health care.     

Business process management with the user requirements notation

A number of recent initiatives in both academia and industry have sought to achieve improvements in e-businesses through the utilization of Business Process Management (BPM) methodologies and tools. However there are still some inadequacies that need to be addressed when it comes to achieving alignment between business goals and business processes. The User Requirements Notation (URN), recently standardized by ITU-T, has some unique features and capabilities beyond what is available in other notations that can help address alignment issues. In this paper, a URN-based framework and its supporting toolset are introduced which provide business process monitoring and performance management capabilities integrated across the BPM lifecycle. The framework extends the URN notation with Key Performance Indicators (KPIs) and other concepts to measure and align processes and goals. An example process for controlling access to a healthcare data warehouse is used to illustrate and evaluate the framework. Early results indicate the feasibility of the approach.     

Determinants of the inhibitory action of purified 14-kDa phospholipases A2 on cell-free prothrombinase complex

It has been suggested (Kini, R. R., and Evans, H. J. (1987) J. Biol. Chem. 262, 14402-14407) that the anticoagulant activity of members of the 14-kDa phospholipase A2 (PLA2) family depends on the presence of basic residues within a variable surface region (residues 54-77) distinct from both the conserved catalytic machinery and surface sites mediating the antibacterial action of these enzymes (see Weiss, J., Inada, M., Elsbach, P., and Crowl, R. M. (1994) J. Biol. Chem. 269, 26331-26337). To further define the determinants of the anticoagulant activity of PLA2, we have analyzed the inhibitory effects of purified native and recombinant PLA2 on cell-free prothrombinase. Both native and recombinant wild-type pig pancreas (net charge -1) and human "secretory" PLA2 (net charge +15) produced similar dose-dependent inhibition of prothrombinase activity that was significantly less potent than a toxic PLA2 purified from snake venom. Site-specific mutations that either increased or decreased PLA2 activity toward bactericidal/permeability-increasing protein-treated Escherichia coli by up to 50-fold had no effect on antiprothrombinase activity. In contrast, substitution of Arg for Asp-59/Gly for Ser-60 in the pig PLA2 increased antiprothrombinase activity by 5-10-fold without affecting catalytic activity toward a range of phospholipid substrates or antibacterial activity. Comparison of antiprothrombinase activity of catalytically active and inactive forms of the PLA2 and under a range of phospholipid conditions revealed that the potent antiprothrombinase activity of native toxic venom PLA2 and of the D59R.S60G mutant pancreatic PLA2 reflect combined catalytic and noncatalytic actions, the latter apparently dependent on basic residues at discrete surface sites in the enzyme.