Optimisation of rancidity stability in long‐chain PUFA concentrates obtained from a rainbow trout (Oncorhynchus mykiss) by‐product

This research was focused on the production of polyunsaturated fatty acid concentrates from a farmed rainbow trout (Oncorhynchus mykiss) by‐product (i.e. belly muscle). The effect of different process variables (urea/fatty acids (FA) contents ratio, crystallisation time and temperature and stirring speed of the urea/FA mixture) on the lipid oxidation development during the urea complexation process was investigated. For this purpose, an experimental design (26 runs) following the response‐surface methodology was developed. As a result, peroxide value and TOTOX index showed to be dependent on the crystallisation time and temperature and the urea/FA ratio, while no influence of the crystallisation stirring speed was detected on both indices; additionally, polyene index was affected by the urea/FA ratio and its interaction with the crystallisation time. An optimised desirability score near 1.0 was attained provided values of 2.8 °C, 3.05 h and 3.57 were applied for crystallisation temperature, crystallisation time and urea/FA ratio, respectively.     

Antioxidant and antihypertensive hydrolysates obtained from by-products of cannery sardine and brewing industries

Hydrolysates with antioxidant and antihypertensive activities were obtained from sarcoplasmic proteins of canned sardine by-product and proteases extracted from Brewer’s spent yeast. Using response surface methodology, hydrolysis time and temperature were selected to achieve the maximum bioactivity. Hydrolysates produced using the substrate/enzyme ratio 1:0.27 (mg/U), 7 h and 50ºC, presenting an angiotensin I-converting enzyme-inhibitory activity of 164 µg protein/mL and an antioxidant activity of 293 μM TE/mL. Experimental results agreed with predicted values within a 95% confidence interval. Within this work the simultaneous valorisation of two agro-industrial by-products was successfully achieved.     

Brominated flame retardants in archived serum samples from Norway: a study on temporal trends and the role of age

The temporal trends and influence of age and gender on levels of selected brominated flame retardants (BFRs) in human serum have been assessed by analyzing archived samples from Norway. Serum from 40 to 50 year old men collected at six time periods during 1977 to 1999 and from eight groups of differing age and gender sampled in 1998 were pooled into six and eight samples, respectively. The BFRs were isolated using solid-phase extraction (SPE) and the serum lipids decomposed bytreatmentwith concentrated sulfuric acid directly on the polystyrene-divinylbenzene SPE column, prior to elution of the BFRs. Following diazomethane derivatization, the samples were analyzed by gas chromatography-electron capture mass spectrometry. Eight BFRs were quantified in the serum samples: 2,4,4'-tribromodiphenyl ether (BDE-28), 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), 2,2',4,4',5-pentabromodiphenyl ether (BDE-99), 2,2',4,4',6-pentabromodiphenyl ether (BDE-100), 2,2',4,4',5,5'-hexabromodiphenyl ether (BDE-153), 2,2',4,4',5,6'-hexabromodiphenyl ether (BDE-154), 2,4,6-tribromophenol (TriBP), and tetrabromobisphenol A (TBBP-A). The serum concentrations of all the BFRs, increased during the entire period with the exception of TriBP, and the sum of the six polybrominated diphenyl ethers increased from 0.44 ng/g lipids in 1977 to 3.3 ng/g lipids in 1999. The BFR concentrations in the serum from the different age groups were relatively similar, except for the age group 0-4 years, which had 1.6-3.5 times higher serum concentrations. Women older than 25 years had lower serum concentrations of BFRs compared to the corresponding group of men. No trend related to age or gender, nor time during the period 1977 to 1999 was observed for TriBP. The present study indicates an ongoing increase in human exposure to BFRs, and the current body burden appears to be independent of age, except for infants (0-4 years old), who seem to experience elevated exposure.     

Chemical and microbiological quality of grass carp (Ctenopharyngodon idella) slaughtered by different methods

The effect of two slaughter methods (immersion in ice-water slurry and electrical stunning followed by ice slurry asphyxiation) on chemical and microbiological parameters of grass carp (Ctenopharyngodon idella) stored in ice for 20 days was evaluated. No differences in total volatile basic nitrogen (TVB-N), pH, carbohydrate or protein content of mucus were observed between the slaughter methods. Ice-slaughtered fish had lower bacteria counts at the beginning of storage, but higher counts than fish slaughtered by electricity at the end of storage (p < 0.05). However, no significant differences in the shelf life were observed between the slaughter methods evaluated (limit of acceptability – counts > 3 × 10⁶ CFU g⁻¹ – attained after 13–16 days). Results indicated that the chemical parameters evaluated have a limited applicability to assess the shelf life of grass carp stored in ice, since pH limit (6.8) was exceeded after 4 days, while TVB-N limit (30 mg%) was not attained after 20 days of storage.     

Viscosity Measurements of Liquid Toluene at Low Temperatures Using a Dual Vibrating-Wire Technique

A recently developed dual vibrating-wire technique has been used to perform viscosity measurements of liquid toluene in the temperature range 213 KT298 K, and at pressures up to approximately 20 MPa. The results were obtained by operating the vibrating-wire sensor in both forced and free decay modes. The estimated precision of the viscosity measurements, in either mode of operation, is ±0.5%, for temperatures above or equal to 273 K, increasing with decreasing temperature up to ±1% at 213 K. The corresponding overall uncertainty is estimated to be within ±1% and ±1.5%, respectively.     

A novel automatic algorithm for the segmentation of the lumen of the carotid artery in ultrasound B-mode images

A novel algorithm is proposed for the segmentation of the lumen and bifurcation boundaries of the carotid artery in B-mode ultrasound images. It uses the image contrast characteristics of the lumen and bifurcation of the carotid artery in relation to other tissues and structures for their identification. The relevant ultrasound data regarding the artery presented in the input image is identified using morphologic operators and processed by an anisotropic diffusion filter for speckle noise removal. The information obtained is then used to define two initial contours, one corresponding to the lumen and the other one regarding the bifurcation boundaries, for the application of the Chan-Vese level set segmentation model. A set of longitudinal ultrasound B-mode grayscale images of the common carotid artery was acquired using a GE Healthcare Vivid-e ultrasound system. The results reveal that the new algorithm is effective and robust, and that its main advantage relies on the automatic identification of the carotid lumen, which overcomes the known limitations of the traditional algorithms.     

Damping estimation using free decays and ambient vibration tests

This paper studies the quality of modal damping ratios estimates based on ambient and free vibration tests using both numerical simulations and data collected on large Civil Engineering structures where both tests were performed. The simulated data allowed to study the influence of factors like non-proportional damping or proximity of natural frequencies on the quality of the estimates and also to illustrate the influence of the identification algorithms parameters on the accuracy of the results. The analysis of data collected on a cable-stayed bridge, on the suspended roof of a stadium and on a footbridge permitted to compare the results of both testing approaches in real applications where some factors that cannot be realistically included in the numerical simulations can play an important role. The processing of ambient vibration responses is performed with two output-only identification approaches: frequency domain decomposition and stochastic subspace identification methods. The numerically simulated and the measured free decays were analyzed with a simple method based on filters and fitting of exponential decays and also with the use of subspace models.     

Rate control strategy for embedded wavelet video coders

An investigation into the use of rate-control strategies for embedded wavelet video encoders is presented. It is shown that the best model for the rate×distortion (R-D) curve of these encoders is piecewise linear. Also, an effective iterative procedure is proposed for dealing with the problem of frame dependency, which yields improved rate×distortion results