中频反应溅射SiO2膜与直流溅射ITO膜的在线联镀

多数ITO透明导电玻璃生产线在实现SiO2膜与ITO膜在线联镀时，应用SiO2靶射频溅射沉积SiO2膜工艺和ITO靶直流溅射沉积ITO膜工艺，如果SiO2膜应用硅靶反应磁控溅射工艺，存在这种工艺是否可以与ITO靶直流溅射沉积ITO膜工艺在线联用以及如何实现联用的问题。作者对现有的生产线进行了改造设计、加工，做了大量实验、质谱分析和多项测试研究，成功地实现反应溅射SiO2膜与ITO膜在线联镀，做到SiO2镀膜室的工作状态的变化基本上不影响ITO镀膜室的工艺条件。     

用于微波/射频集成电路的一种新型低损耗介质——多孔硅及氧化多孔硅厚膜

提出在单片微波集成电路(MMIC)中用多孔硅/氧化多孔硅厚膜作微波无源器件的低损耗介质膜.研究了厚度为70μm的多孔硅/氧化多孔硅厚膜在低阻硅衬底上的形成,这层厚膜增加了衬底的电阻率,减少了微波的有效介质损耗.通过测量在低阻硅衬底上形成的氧化多孔硅厚膜上的共平面波导的微波特性,证明了在低阻硅衬底上用厚膜氧化多孔硅可以提高共平面传输线(CPW)的微波特性.     

DO浓度对SUFR系统同步硝化反硝化的影响

采用螺旋升流式反应器（SUFR）处理生活污水，考察了好氧反应池中DO浓度对其同步硝化反硝化的影响。结果表明，在好氧反应池上部溶解氧浓度为3．0～3．5mg／L时，发生了明显的同步硝化反硝化现象，其对TN的去除量占SUFR系统对TN去除总量的16％左右；好氧反应池中的同步硝化反硝化反应只发生在池的下部，其中、上部只进行了好氧硝化反应；SUFR系统中好氧反应池上部的最佳溶解氧浓度范围为3．0～3．5mg／L，此时系统的硝化和反硝化效果最佳，好氧反应池中的脱氮效果也较好，系统对TN的去除率〉84％。     

A systematic data integration technique for mold-surface polishing processes planning

This paper presents a new MSDI (mold surface data integration) method for presenting ruled mold-surface data for CAPP applications. The method makes use of adjacency and feature-data matrices to establish a framework of feature-based data. The MSDI method enables the storage, retrieval and operations of geometries, topologies, and machining information of a given ruled mold surface. The matrices of adjacency and feature-data effectively represent the relations. Boolean algebra and group technology (GT) methods are introduced to generate the desired process plans. A sample mold made of ruled surfaces is made and used to show the effectiveness of the proposed data representation and the integrated mold surface processing method. A compact computer program is implemented to enhance the speed and accuracy of the MSDI method. The numerical results indicate that the mold surface decomposition and integration procedure presented in this paper are systematic and effective. The paper provides a novel modular mold surface modeling tool and procedure that can be further extended to accommodate more features appearing in complicated ruled mold surfaces.     

Congenic rats reveal three independent Copenhagen alleles within the Mcs1 quantitative trait locus that confer resistance to mammary cancer

It has previously been shown that the Copenhagen (COP) rat contains several genetic loci that contribute to its mammary tumor-resistant phenotype after 7,12-dimethylbenz(a)anthracene (DMBA) administration. One of these loci, mammary carcinoma susceptibility 1 (Mcs1), is located on the centromeric end of chromosome 2 and appears to act in a semidominant fashion. To confirm the existence and independent action of this locus and also aid in the identification of the physical location of the Mcs1 gene, congenic lines were generated by transferring the Mcs1 COP allele onto a Wistar Furth (WF) genetic background. Male carriers were genotyped using microsatellite markers spanning 20-30 cM of the Mcs1 locus. One of the congenic lines minimally retained the COP allele at D2Mit29 on the centromeric end of chromosome 2 and extended distally to D2Rat201. Heterozygous Mcs1 carrier rats were interbred, and the female offspring were treated with DMBA. The female rats from the Mcs1 congenic line that carried one or two COP alleles of the Mcs1 region had a significantly reduced (65 and 85%, respectively) tumor development (P < 0.001) compared with rats carrying zero COP alleles at this locus. A WF.COP-D2Mit29/D2Rat201 homozygous congenic strain derived at the N10 generation was treated with DMBA, and the COP homozygous rats developed 1.5 +/- 0.3 carcinomas/rat versus 6.3 +/- 0.5 in WF control rats (P < 0.0001). Fine mapping of this congenic interval using several recombinant lines identified three genetic loci within the Mcs1 congenic region that independently supported a tumor resistance phenotype. These genetic loci have been termed Mcs1a, Mcs1b, and Mcs1c. In rats for which each locus was homozygous for the COP allele, tumor development was reduced by approximately 60% compared with littermate controls. The identification of these independent loci within the Mcs1 COP allele provide a model of the genetic complexity of cancer.     

A Bluetooth Routing Protocol Using Evolving Fuzzy Neural Networks

In this paper, a routing protocol which utilizes the characteristics of Bluetooth technology is proposed for Bluetooth-based mobile ad hoc networks. The routing tables are maintained in the master devices and the routing zone radius for each table is adjusted dynamically by using evolving fuzzy neural networks. Observing there exists some useless routing packets which are helpless to build the routing path and increase the network loads in the existing ad hoc routing protocols, we selectively use multiple unicasts or one broadcast when the destination device is out of the routing zone radius coverage of the routing table. The simulation results show that the dynamic adjustment of the routing table size in each master device results in much less reply time of routing request, fewer request packets and useless packets compared with two representative protocols, Zone Routing Protocol and Dynamic Source Routing.     

Design and analysis of low-power cache using two-level filter scheme

Power consumption is an increasingly pressing problem in modern processor design. Since the on-chip caches usually consume a significant amount of power, it is one of the most attractive targets for power reduction. This paper presents a two-level filter scheme, which consists of the L1 and L2 filters, to reduce the power consumption of the on-chip cache. The main idea of the proposed scheme is motivated by the substantial unnecessary activities in conventional cache architecture. We use a single block buffer as the L1 filter to eliminate the unnecessary cache accesses. In the L2 filter, we then propose a new sentry-tag architecture to further filter out the unnecessary way activities in case of the L1 filter miss. We use SimpleScalar to simulate the SPEC2000 benchmarks and perform the HSPICE simulations to evaluate the proposed architecture. Experimental results show that the two-level filter scheme can effectively reduce the cache power consumption by eliminating most unnecessary cache activities, while the compromise of system performance is negligible. Compared to a conventional instruction cache (32 kB, two-way) implemented with only the L1 filter, the use of a two-level filter can result in roughly 30% reduction in total cache power consumption. Similarly, compared to a conventional data cache (32 kB, four-way) implemented with only the L1 filter, the total cache power reduction is approximately 46%.     

End labeling studies of fragmented DNA in the avian growth plate: evidence of apoptosis in terminally differentiated chondrocytes

The chondro-osseous junction has been the subject of considerable scrutiny, especially in terms of the fate and role of the terminally differentiated chondrocyte. Although it has been proposed that these cells change their phenotype and survive in the epiphysis, possibly as osteoblasts, evidence from a number of other studies suggests that chondrocytes may undergo apoptosis or programmed cell death. A useful test for programmed cell death is to end label DNA in cryosections using the commercial reagent ApopTag and detect antibody binding to fragmented DNA by epifluorescence; more direct assessments include examination of the nucleus for condensation of chromatin evaluating fragmentation through alkaline and pulsed field agarose gel electrophoresis of DNA, and measuring apoptosis by flow cytometry. We found that we could label cells in the proliferative and the hypertrophic region of the proximal tibial growth plate of the chick with ApopTag. Most of the chondrocytes in the hypertrophic region were labeled by the reagent; in contrast, few proliferative chondrocytes were stained by the end-labeling procedure. Both agarose and pulsed field electrophoresis were used to confirm that there was fragmentation of chondrocyte DNA. Alkaline gel electrophoresis indicated that there was more fragmentation of DNA from hypertrophic cells than from proliferative chondrocytes. Further evidence in support of apoptosis was provided by electron microscopic observation of cells in the hypertrophic region of the growth plate. We noted that many of the cells in this region of the growth plate appeared to be undergoing programmed cell death since their nuclei contained condensed chromatin. Finally, we used flow cytometry to analyze chondrocytes isolated from the proliferating and hypertrophic regions of the growth plate for apoptosis. Dual parameteric flow cytometric contour plots of Hoechst and 7-amino-actinomycin D fluorescence showed that abut 8% of cells in the plate were apoptotic. Most of these cells were in hypertrophic cartilage. In summary, the results of this investigation indicate that chondrocytes terminate their life history by apoptosis. While it is possible that the terminal labeling studies may overestimate the number of cells undergoing this event, the data lend credence to the view that cells are removed from the epiphysis through apoptosis. If this is the case, then chondrocytes probably enter the terminal phase of their life as fully functioning cells and genomic, and/or local environmental conditions provide termination signals that initiate events that lead to programmed cell death.