Applicability of Pressurized Liquid Extraction for Melamine Analysis in Pet Foods with High-Performance Liquid Chromatography with Diode Array Detection

A pressurized liquid extraction (PLE) method was developed for melamine analysis in pet foods. The PLE method which utilized an accelerated solvent extraction (ASE®) system was also compared with sonication and polytron extraction methods. The parameters for the optimized PLE method were temperature (75?°C for wet pet food, 125?°C for dry pet food), pressure (1,500 psi), static time (10 min), flush volume (40%), purge time (1 min), and number of cycles (1). Recoveries obtained by PLE method were significantly higher (P?≤?0.05) than those of sonication and polytron methods for dry pet food samples. For the analysis of adulterated pet foods, PLE resulted in the highest melamine content followed by sonication and polytron. Using PLE, samples fortified with melamine at 2.5 and 100 mg kg^?1 resulted in recoveries ranging from 55% to 90% for wet samples and from 90% to 116% for dry samples. Low recovery rate from wet samples at low spike level (2.5 mg kg^?1) may have been caused by co-aggregation of polysaccharide and protein with melamine due to low pH during solid-phase extraction cleanup. Limit of detection and limit of quantification values were 0.5 (mg kg^?1) and 1.0 (mg kg^?1) for dry samples. Overall, PLE had the best extraction efficiency compared to sonication and polytron, proving PLE to be a useful tool for melamine analysis of pet foods.     

Quantitative analysis of the cross-linked structure of microgels using fluorescent probes

Properties of polymeric microgels are influenced by the internal polymer cross-linked structure, but tools to quantitatively analyze this internal structure are limited. With the finding that polymer networks alter the diffusivity and subsequent excimer formation of pyrene, this study used the ratio between pyrene excimer and monomer emission to determine the number of cross-links (N) and average pore size (ξ) in poly(ethylene glycol) diacrylate (PEGDA) microgels. A calibration curve to relate pyrene emission to N and ξ in PEGDA hydrogels was prepared and used to calculate N and ξ in PEGDA microgels. The pyrene emission indicated that PEGDA microgels had a higher cross-linking density and a smaller average pore size when compared with bulk cross-linked hydrogels of the same PEGDA concentration. The analytical method demonstrated in this study may be useful for fine-tuning polymeric microgel properties for a broad array of applications.     

Grafting of polystyrene “from” and “through” surface modified titania nanoparticles

We report the surface modification of titania (TiO₂) nanoparticles with azo-based radical initiator and vinyl (acrylate) polymerizable groups. This is achieved through the reaction of the surface hydroxyl groups of the titania with acid halides. Polymer (specifically, polystyrene) was grafted “from” the surface using the azo-modified titania, and “through” the surface of the vinyl-modified surface. Both conventional radical and reversible addition-fragmentation chain transfer (RAFT) polymerizations were performed. The surface-modified titania and the polystyrene-titania nanocomposites were characterized using IR spectroscopy, thermogravimetric analysis and gel permeation chromatography.     

Developing decision support tools for the selection of “gentle” remediation approaches

A range of tools have been proposed to support decision making in contaminated land remediation. From a European perspective it is clear, however, that there are considerable national differences in the decision support process, and more generally in the extent to which this process supports the selection of less invasive, alternative remediation options such as phytoremediation, in situ immobilisation etc. (referred to here as “gentle” remediation technologies). In this paper we present results from the recently completed European Union ERANET SNOWMAN project SUMATECS (Sustainable Management of Trace Element Contaminated Sites), and critically review available decision support tools in terms of their fitness for purpose for the application of gentle remediation technologies. Stakeholder feedback indicates a lack of knowledge amongst stakeholders of currently available decision support tools. We propose that decision support which focuses on gentle remediation is more strongly incorporated into existing, well-established (national) decision support tools / decision-frameworks, to promote more widespread use and uptake.     

Behaviour of flush end plate joints to concrete-filled steel tubular columns

This paper presents the results of an experimental program for bolted moment connection joints of circular or square concrete filled steel tubular (CFST) columns, and H-shaped steel beams using high-strength blind bolts. In order to investigate the static performance and failure modes of the blind bolted connection, an experimental program was conducted involving four sub-assemblages of cruciform beam-to-column joints subjected to monotonic loading. Moment-rotation relationships of the tested connections were obtained and their performance was evaluated in terms of their stiffness, moment capacities and ductility. The test parameters varied were the column section type and the thickness of the end plate. The results showed that the proposed blind bolted connection, which behaves in a semi-rigid and partial strength manner according to the EC3 specification, displays reasonable strength and stiffness. The rotation capacity of this type of connection to square or circular CFST columns exceeds 70 mrad and this satisfies the ductility requirements for earthquake-resistance in most aseismic regions. The blind bolted connection is shown to be a reliable and effective solution for moment-resisting composite frame structures.     

Absorbed dose measurements of a handheld 50 kVP X-ray source in water with thermoluminescence dosemeters

Absorbed dose rate measurements of a 50 kV(p) handheld X-ray probe source in a water phantom are described. The X-ray generator is capable of currents of up to 40 microA, and is designed for cranial brachytherapy and intraoperative applications with applicators. The measurements were performed in a computer-controlled water phantom in which both the source and the detectors are mounted. Two different LiF thermoluminescence dosemeter (TLD) phosphors were employed for the measurements, MTS-N (LiF:Mg,Ti) and MCP-N (LiF:Mg,Cu,P). Two small ionisation chambers (0.02 and 0.0053 cm(3)) were also employed. The TLDs and chambers were positioned in watertight mounts made of water-equivalent plastic. The chambers were calibrated in terms of air-kerma rate, and conventional protocols were used to convert the measurements to absorbed dose rate. The TLDs were calibrated at National Institute of Standards and Technology (NIST) in terms of absorbed dose rate using a (60)Co teletherapy beam and narrow-spectrum X-ray beams. For the latter, absorbed dose was inferred from air-kerma rate using calculated air-kerma-to-dose conversion factors. The reference points of the various detectors were taken as the center of the TLD volumes and the entrance windows of the ionisation chambers. Measurements were made at distances of 3-45 mm from the detector reference point to the source center. In addition, energy dependence of response measurements of the TLDs used was made using NIST reference narrow spectrum X-ray beams. Measurement results showed reasonable agreement in absorbed dose rate determined from the energy dependence corrected TLD readings and from the ionisation chambers. Volume averaging effects of the TLDs at very close distances to the source were also evident.     

用于照明设备的高亮度LED驱动

随着高亮度(HB)LED效率的不断提高,即流明/瓦特(Lm/W)比的增加,越来越多的照明应用开始选择高亮度LED,例如汽车的外灯(日间行车灯,近光灯、远光灯)和普通照明设备等。LED生产厂家最近推出的高亮度LED的效率已经超过80Lm/W。因此,在照明设备中可以利用LED替换传统的卤素灯,例如MR16聚光灯。从传统的卤素灯过渡到高亮度LED可以大大降低功耗,     

Serial and Parallel FPGA-based Variable Block Size Motion Estimation Processors

H.264/AVC is the latest video coding standard adopting variable block size motion estimation (VBS-ME), quarter-pixel accuracy, motion vector prediction and multi-reference frames for motion estimation. These new features result in much higher computation requirements than previous coding standards. In this paper we propose a novel most significant bit (MSB) first bit-serial architecture for full-search block matching VBS-ME, and compare it with systolic implementations. Since the nature of MSB-first processing enables early termination of the sum of absolute difference (SAD) calculation, the average hardware performance can be enhanced. Five different designs, one and two dimensional systolic and tree implementations along with bit-serial, are compared in terms of performance, pixel memory bandwidth, occupied area and power consumption.

针对便携式应用的LED驱动解决方案

本文将总结部分常用LED驱动方案,然后详细探讨一些更新颖的LED驱功方法.