Comparison of Displacement and Mixing Diffusers

In order to cumpare the peformance of different supply diffuers of ventilation air, the airflow passern, temperature stratifiation and contaminant dispersion in a furnitured office ventilated by three kinds of air diffuer were numerically investigated. The air diffuers studied in this paper are a quarter-cylinder displacement diffuer on the floor and mixing diffuers (linear and vortex diffuers) on the ceiling. The heat sources in the of-fice are considered to be 50% convective and 50% radiative. The k-? two-equatwn model of turbulence is employed to predict the turbulent diffusion. The results show that the displacement diffuser provides a rather uniform flow field with low velocify in most areas, and the vertical temperature difference from floor to ceiling is as high as 6 K. With the linear diffuser, the air velociry is high, and the temperature is uniform both horizontally and vertically. The air velocity generated by the vortex diffuser is moderate. The distributions of the temperature and the contaminant are rather uniform.     

多处理器芯片体系结构研究

随着超大规模集成电路工艺和超级计算技术的发展，作者认为在单个芯片内集成多处理器系统将成为可能。本文详细讨论了多处理器芯片的分类和结构，着重阐述了同构型多处理器芯片的主要研究方向，并对同构型多处理器的可行性作出了分析。     

一种实验炼钢渣的穆斯堡尔谱研究

一种实验炼钢渣不同炉次样品的室温透射穆斯堡尔谱由两组裂距较大的四极分裂双峰和一组裂距较小的双峰组成，它们分别相应于具有不同微观环境的Ｆｅ＾２＋和Ｆｅ＾３＋。参照文献中已知ＦｅｘＯ的穆斯堡尔谱数据，可确定该渣中的主要含铁相为ＦｅｘＯ。Ｘ射线衍射相分析给出相同的结果。按亚谱的面积比计算出Ｆｅ＾２＋和Ｆｅ＾３＋的相对含量分别为８５％和１５％左右。进一步选取与样品晶体结构相联系的原子簇模型。用ＭＳ－Ｘａ方     

机械合金化Fe50Ti50非晶的形成及球磨强度对它的影响

本文通过电子扫描和Ｘ衍射对机械合金人Ｆｅ５０Ｔｉ５０非晶粉末形成做了研究。研究发现：机械合金非晶形成可以大致地分为二个阶段－粉末的破碎阶段和非晶的形成阶段。另外，对球磨强度对非晶形成的影响进行了研究。结果表明：强度低时粉末需要较长的时间才能形成非晶，强度高时粉末形成非晶的时间大大缩短，但在随后的球磨中，粉末会重新晶化形成新相。     

A NEW ALGORITHM FOR ADAPTIVE LATTICE FILTERAND ITS APPLICATION IN THE SPEECH LINEARPREDICTIVE SYNTHESIS

In this paper, an adaptive line spectral pair filter is derived from an adaptive lattice filter. A least-mean-square(LMS) type adaptive algorithm used to calculate directly the line spectral pair(LSP) coefficients on a stage-by-stage basis is presented. Experimental results show that the algorithm has higher convergence rate and lower misadjustment as compared with the other algorithms. The LSP coefficients calculated by the algorithm have been used to carry out speech linear predictive synthesis, resulting in better results than PARCOR coefficients.     

基于知识的可重用构件查询系统KCQ

本文提出了一个基于知识的、支持面向对象程序设计方法的软件重用构件查询系统，本系统采用了语义网络知识表示模型，提供了构件知识表示语言ＣＫＲＬ，来描述可重用构件的特征和用于检索的知识．提供了语义网络联想式查询、条件查询和构件评价．     

Topology and Stability of Trivalent Polyhedral Clusters

An algorithm to generate the molecular graphs of the trivalent clusters is presented. All the polyhedral trivalent cages with 4-16 vertices are enumerated, with particular attention being given to their symmetry, spectra and stability. The relative stability of isomers is not decided solely by their symmetry. A new kind of spectral phenomenon is reported. This is the occurrence of graphs having the same HOMO-LUMO gap, the same E and the same even-order moments. We refer to it as 'pseudo-isospectrality'.     

磷酸盐激光玻璃中铂颗粒密度与氧化还原平衡关系的研究

用吸收光谱法研究了Ｒ２Ｏ—ＢａＯ—Ｐ２Ｏ５系统磷酸盐激光玻璃中铂颗粒密度与铭的氧化还原平衡的关系。结果表明，玻璃中铂颗粒密度随平衡向右移动而减小；玻璃中平衡随熔炼气氛中氧分压增大、熔炼温度升高而向右移动，当足够大时，铂颗粒不能形成。     

Fabrication and Characterization of Carbon Nanotube–Titanium Nitride Composites with Enhanced Electrical and Electrochemical Properties

This work reports the fabrication and the characterization of a new composite consisting of multiwalled carbon nanotubes (CNTs) and conducting titanium nitride (TiN) with a higher specific surface area ( S _BET), enhanced electrical conductivity (σ), and specific capacitance. With increasing CNT content, the electrical conductivity and electrochemical performance of the CNT–TiN composites gradually increase. In the presence of 5 wt% (12.0 vol%) CNTs, the electrical conductivity and the weight-specific capacitance of CNT–TiN composite are increased by 3.6 times and 54.8% compared with pure TiN, respectively.