Cheating Strategies for the Gale-Shapley Algorithm with Complete Preference Lists

This paper deals with a strategic issue in the stable marriage model with complete preference lists (i.e., a preference list of an agent is a permutation of all the members of the opposite sex).     

Synergistic effect of Pt or Pd and perovskite oxide for water gas shift reaction

The water gas shift (WGS) reaction over Pt and Pd catalysts supported on various perovskite oxides has been investigated at 573 K without catalyst pretreatment. The Pt and Pd catalysts on LaCoO₃ support showed high catalytic activity. Interaction between Pt or Pd and the support is considered to promote the WGS reaction: Pt/LaCoO₃ had high initial activity but deactivated immediately; Pd/LaCoO₃ was less active than Pt/LaCoO₃, but had superior stability. Catalysts were characterized using XRD, STEM, XPS, and H₂-temperature programmed reduction (TPR). Results of this study showed that reduction of the support decreased the CO conversion on Pt/LaCoO₃. On the other hand, Pd/LaCoO₃ showed stable activity for the WGS reaction. Therefore, Pd was added to Pt/LaCoO₃ for stabilizing the catalyst activity, and 0.5 wt.% Pd/1 wt.% Pt/LaCoO₃ catalyst showed higher activity and stability.     

Zinc Dialkyl Phosphate (<Emphasis Type="Bold">ZP</Emphasis>) as an Anti-Wear Additive: Comparison with <Emphasis Type="Bold">ZDDP</Emphasis>

In this study, we are interested in the anti-wear properties of zinc dialkyl phosphate additive (ZP) in comparison with ‘classical’ zinc dialkyldithiophosphate (ZDDP). Friction tests were performed on a reciprocating tribometer using both ball-on-flat and cylinder-on-flat configurations under a Hertzian contact pressure of 0.9 GPa. Experiments were carried out as a function of temperature (25 and 100 °C), sliding speed (25, 50 and 100 mm/s) and additives concentrations. Ball wear scar diameters as well as friction coefficient were measured. In order to better understand the anti-wear mechanisms of these additives, friction tests were followed by surface analyses such as AES (Auger Electron Spectroscopy) and XPS (X-Ray Photoelectron Spectroscopy). Transmission Electron Microscopy (TEM) observations of the ZDDP and ZP tribofilms were also carried out to visualise the generated layers. The anti-wear capability of ZP molecule is discussed.     

A novel ferromagnetic thermo-stent for plaque stabilization that self-regulates the temperature

The purpose of this study is to investigate the vascular wall with a thermally self-regulating, cylindrical stent made of a low Curie temperature ferromagnetic alloy. Physiologic saline was circulated in the silicone model vessel implanted with the stent. The stent-temperature remained nearly constant for variable saline flows, saline temperatures, and magnetic flux densities. Stent implants of this type in human blood vessels could potentially enable thermotherapy and temperature determination without catheterization.     

Interactive segmentation of the cerebral lobes with fuzzy inference in 3T MR images.

Measurement of volume and surface area of the frontal, parietal, temporal and occipital lobes from magnetic resonance (MR) images shows promise as a method for use in diagnosis of dementia. This article presents a novel computer-aided system for automatically segmenting the cerebral lobes from 3T human brain MR images. Until now, the anatomical definition of cerebral lobes on the cerebral cortex is somewhat vague for use in automatic delineation of boundary lines, and there is no definition of cerebral lobes in the interior of the cerebrum. Therefore, we have developed a new method for defining cerebral lobes on the cerebral cortex and in the interior of the cerebrum. The proposed method determines the boundaries between the lobes by deforming initial surfaces. The initial surfaces are automatically determined based on user-given landmarks. They are smoothed and deformed so that the deforming boundaries run along the hourglass portion of the three-dimensional shape of the cerebrum with fuzzy rule-based active contour and surface models. The cerebrum is divided into the cerebral lobes according to the boundaries determined using this method. The reproducibility of our system with a given subject was assessed by examining the variability of volume and surface area in three healthy subjects, with measurements performed by three beginners and one expert user. The experimental results show that our system segments the cerebral lobes with high reproducibility.     

Protective layer for high‐efficiency PDPs driven at low voltage

Abstract— The sustain pulse voltage of a panel for 66‐kPa Ne + Xe (5–30%) with an (SrCa)O protective layer is 20–40% lower than that with an MgO protective layer. The luminous efficiency of the panel with a Ne + Xe (30%) (SrCa)O protective layer is 1.5 times that of the conventional panel with a Ne + Xe (10%) MgO protective layer; the sustain pulse voltages of these panels are almost the same. The power loss caused by panel capacitance is proportional to the second power of the sustain pulse voltage. Using the (SrCa)O protective layer for Xe (5–30%), the power loss is reduced by 35–60% compared with the MgO protective layer. It follows that, using the (SrCa)O protective layer, we can increase the Xe content with little power loss and thus achieve high‐efficiency PDPs. As for MgO and CaO with Xe ions, electrons are probably ejected from only the defect states. On the other hand, as for the SrO with Xe ions, it is likely that electrons can be ejected from not only defect states but also the valance band. This seems to be the reason why the driving voltage is lower with the (SrCa)O protective layer than with the MgO protective layer.     

Space charge behavior in low density polyethylene at pre-breakdown

It has been known that the electrical breakdown of insulating materials is strongly affected by the formation of space charge in the bulk of the materials. Many researchers have attempted to study the relationship between the space charge and the breakdown; however, it has not been clarified yet. Although the pulsed electroacoustic (PEA) method has been widely used to observe space charge profiles, previous works have not shown clear evidence of the influence of the space charge on the breakdown. Therefore, we have developed a new PEA system with an interval of 0.5 ms to observe the space charge distribution continuously under the ultra-high electric field. Using this system, we observed the space charge dynamics in the low-density polyethylene (LDPE) at and around the breakdown. We also investigated the dependence of the applied electric field on space charge behavior. From the results, it is found that the injected charge packet moved faster and deeper under a relatively lower electric field rather than that under a higher electric field. Furthermore, we found that the maximum electric field in each specimen was almost the same when the breakdown happened in a specimen.     

Laser Thomson scattering and optical emission studies of striated PDP micro‐discharge plasmas

Abstract— Properties of a plasma‐display‐panel (PDP) like discharge were examined by emission and laser Thomson scattering (LTS) measurements. Emission measurements were performed using an intensified CCD camera. By varying several external parameters such as the amplitude of the input voltage, gas composition, and pressure, the influence of these parameters on the discharge behavior was studied. Results of emission measurements showed that they were in good agreement with similar emission measurements on real PDP cells. LTS measurements were performed for the striated PDP‐like discharge at a pressure of 100 Torr and the results showed clear modulations in both profiles of electron density and electron temperature.     

Stability tests and stabilization for piecewise linear systems based on poles and zeros of subsystems

This paper provides several stability tests for piecewise linear systems and proposes a method of stabilization for bimodal systems. In particular, we derive an explicit and exact stability test for planar systems, which is given in terms of coefficients of transfer functions of subsystems. Restricting attention to the bimodal and planar case, we show simple stability tests. In addition, we drive a necessary stability condition and a sufficient stability condition for higher-order and bimodal systems. They are given in terms of the eigenvalue loci and the observability of subsystems. All the stability tests provided in this paper are computationally tractable, and our results are applied to the stabilizability problem. We confirm the exactness and effectiveness of our approach by illustrative examples.     

A Social Robot that Stands in Line

Recent research in mobile robot navigation make it feasible to utilize autonomous robots in service fields. But, such applications require more than just navigation. To operate in a peopled environment, robots should recognize and act according to human social behavior. In this paper, we present the design and implementation of one such social behavior: a robot that stands in line much as people do. The system employs stereo vision to recognize lines of people, and uses the concept of personal space for modeling the social behavior. Personal space is used both to detect the end of a line and to determine how much space to leave between the robot and the person in front of it. Our model of personal space is based on measurements from people forming lines. We demonstrate our ideas with a mobile robot navigation system that can purchase a cup of coffee, even if people are waiting in line for service.