Characterization of electrical properties and photosensitivity of SnS thin films prepared by the electrochemical deposition method

Using the electrochemical deposition (ECD) method, we prepared tin sulfide thin films, which are suitable for the absorption layer in solar cells because of its bandgap energy (1 eV). We first optimized pulse-form biasing for ECD by characterizing deposited samples with scanning electron microscope, Auger electron spectroscopy and X-ray diffraction measurements. Then, we investigated the electrical properties of deposited SnS thin films and the properties of contacts with several different metals. Furthermore, we observed the photoconductivity of the films by means of photoelectrochemical measurements. From these results, we confirmed that the SnS thin films show p-type conduction.     

Characterization and hydrogen sorption behaviors of FeNiCr-carbon composites derived from Fe,Ni and Cr-containing polyacrylonitrile fibers prepared by electrospinning method

In order to enhance hydrogen storage capacity of carbonaceous materials through metal modification, FeNiCr-carbon composites were prepared by calcination of Fe, Ni and Cr-containing polyacrylonitrile (PAN) fibers fabricated by electrospinning method. Fe (III), Ni (II) and Cr (III) acetylacetonates (M (acac)_n) were selected as metal sources. Increase of specific surface area and formation of micropores were observed on heat decomposition of M (acac)_n particularly through introduction of steam. Maximal hydrogen content, 1.62 mass%, was obtained at 77 K under 0.8 MPa of hydrogen for a FeNiCr-carbon composite, which contained about 15.5 mass% of metals and had specific surface area of 501 m² g^?1. The hydrogen content exceeded the hydrogen physisorption limit, 2.34 mass% per 1000 m² g^?1, which was calculated on the basis of the commensurate–incommensurate transition with an enhancing factor ρ of 1.126. After hydrogenation at 653 K, no hydrogen desorption peaks were observed for FeNiCr powders derived from M (acac)_n, and one peak at 828 K for a carbonaceous sample prepared from unmodified PAN fibers. From the most promising FeNiCr-carbon composite, another peak was recorded at 752 K in addition to the peak at 828 K. The former would be originated from hydrogen on novel sorption sites additionally created on the composite formation.     

Traversable Region Estimation for Mobile Robots in an Outdoor Image

This paper describes a novel method to estimate appropriate traversable regions from an outdoor scene image. The traversable regions output by the proposed method reflect the common sense of people. For example, a candidate traversable region is “a paved road somewhat distant from the side ditch.” The input to the traversable region estimation is one color image. First, category is assigned to each pixel in the image. The categorization result is then input to the region estimator. Finally, the traversable region are estimated on the input image. An important aspect of this method is the application of two score functions in region estimation process. One score function places high value on categories selected as traversable paths by subjects. The other function places high value on categories that are not selected as traversable regions but are adjacent to categories with traversable paths. A combination of these two functions produces feasible estimation results. The effectiveness of the combined score functions was evaluated by experiments and a questionnaire.     

Ionization probability of secondary ions sputtered from Si(1 1 1) and Ge(1 1 1) surfaces

We have measured the energy distributions of the secondary ions sputtered from the Si(1 1 1) and Ge(1 1 1) surfaces and investigated the ionization probabilities of sputtered Si⁺ and Ge⁺ ions for clarifying their ionization mechanisms. The observed ionization probabilities depend on the velocity of Si⁺ and Ge⁺ ions. This velocity dependence can be successfully analyzed by a theoretical expression, which was proposed originally for the metal surfaces. This implies that the ionization mechanism of Si⁺ and Ge⁺ ions is the same as ions sputtered from the metal surface, i.e., the resonant electron transfer in the high velocity regime and the thermal excitation process in the low velocity regime. The difference in the ionization probability between Si⁺ and Ge⁺ ions is well explained by the difference in the band gap energy.     

Evaluation of the Anti-Proliferative Activity of Rare Aldohexoses against MOLT-4F and DU-145 Human Cancer Cell Line and Structure-Activity Relationship of D-Idose

D-Allose (D-All), a C-3 epimer of D-glucose (D-Glc), is a naturally rare monosaccharide, which shows anti-proliferative activity against several human cancer cell lines. Unlike conventional anticancer drugs, D-All targets glucose metabolism and is non-toxic to normal cells. Therefore, it has attracted attention as a unique “seed” compound for anticancer agents. However, the anti-proliferative activities of the other rare aldohexoses have not been examined yet. In this study, we evaluated the anti-proliferative activity of rare aldohexoses against human leukemia MOLT-4F and human prostate cancer DU-145 cell lines. We found that D-All and D-idose (D-Ido) at 5 mM inhibited cell proliferation of MOLT-4F cells by 46 % and 60 %, respectively. On the other hand, the rare aldohexoses at 5 mM did not show specific anti-proliferative activity against DU-145 cells. To explore the structure–activity relationship of D-Ido, we evaluated the anti-proliferative activity of D-sorbose (D-Sor), 6-deoxy-D-Ido, and L-xylose (L-Xyl) against MOLT-4F cells and found that D-Sor, 6-deoxy-D-Ido, and L-Xyl showed no inhibitory activity at 5 mM, suggesting that the aldose structure and the C-6 hydroxy group of D-Ido are important for its activity. Cellular glucose uptake assay and western blotting analysis of thioredoxin-interacting protein (TXNIP) expression suggested that the anti-proliferative activity of D-Ido is induced by inhibition of glucose uptake via TXNIP-independent pathway.     

Analysis of imazalil and its major metabolite in citrus fruits by GC-FTD

A simplified simultaneous analytical method of imazalil (IZ) and its major metabolite, alpha-(2,4-dichlorophenyl)-1H-imidazole-1-ethanol (IZM), in citrus fruits was developed, and commodities samples were investigated. A homogenate of citrus fruits was extracted with ethyl acetate under basic conditions. The crude extract was partitioned between 0.025 mol/L of sulfuric acid and ethyl acetate. The analytes were extracted from the aqueous fraction under basic conditions with ethyl acetate. The extract solution was purified with an ENVI-Carb cartridge, and then analyzed by GC-FTD and GC/MS. Recoveries of IZ and IZM added to grapefruit at the level of 0.05 microgram/g were 90.0 and 108.7%, and those in the case of lemon were 100.4 and 93.0%, respectively. The detection limits were 0.01 microgram/g in samples. By this method, IZ and IZM were analyzed in 46 citrus fruits on the market and were detected simultaneously in some samples.     

Oxidation of Fe (II) in sulfuric acid solutions with dissolved molecular oxygen

The oxidation of Fe(II) with dissolved molecular oxygen was studied in sulfuric acid solutions containing 0.2 mol . dm^-3 FeSO₄ at temperatures ranging from 343 to 363 K. In solutions of sulfuric acid above 0.4 mol . dm^-3, the oxidation of Fe (II) was found to proceed through two parallel paths. In one path the reaction rate was proportional to both [Fe²⁺]² and po₂, exhibiting an activation energy of 51.6 . kJ mol^-1. In another path the reaction rate was proportional to [Fe²⁺]², [SO_4-], and po₂ with an activation energy of 144.6 kJ . mol^-1. A reaction mechanism in which the SO_4- ions play an important role was proposed for the oxidation of Fe(II). In dilute solutions of sulfuric acid below 0.4 mol . dm^-3, the rate of the oxidation reaction was found to be proportional to both [Fe(II)]² and Po₂, and was also affected by [H⁺] and [SO_2- ⁴]. The decrease in [H⁺] resulted in the increase of reaction rate. The discussion was further extended to the effect of Fe (III) on the oxidation reaction of Fe (II).     

Wide-wavelength tunable lasers with 100 ghz fsr ring resonators

A widely tunable laser, consisting of a 100 GHz FSR triple-ring resonator and a semiconductor optical amplifier, is presented. The 100 GHz FSR ring resonator makes it possible to demonstrate 96 nm wavelength tuning with stable single-mode operation produced by a large threshold gain difference