赋予针织服装个性魅力的女红工艺

将富于变化的女红工艺与单调的针织服装相结合，会使针织服装由平淡变为丰富，由呆板变为活泼。文章论述了在针织服装中运用女红图案、色彩、材料、针法的原理。     

Heat transfer of a row of three butane/air flame jets impinging on a flat plate

Experiments were performed to investigate the heat transfer characteristics of a row of three premixed, laminar, butane/air flame jets impinging on a water-cooled flat plate. The between-jet interference was found to reduce the heat transfer rate in the jet-to-jet interacting zone due to the depressed combustion. The interference became stronger when the jet-to-jet spacing and/or the nozzle-to-plate distance were/was small. The positive pressure existed in the between-jet interacting zone caused the asymmetric flame and heat transfer distribution of the side jet. The meeting point of the spreading wall jets of the central and the side jets did not occur at the midpoint of the neighboring jets, but at a location shifted slightly outwards. The maximum local heat flux and the maximum area-averaged heat flux occurred at a moderate nozzle-to-plate distance of 5d with a moderate jet-to-jet spacing of 5d. The lowest area-averaged heat flux was produced when both the jet-to-jet spacing and the nozzle-to-plate distance were small. Comparing with a single jet under the same experimental conditions, the heat transfer rates in both the stagnation point and the maximum heat transfer point were shown to be enhanced in a row of three-jet-impingement system. The present study provided detailed information on the heat transfer characteristics of a row of three in-line impinging flame jets, which had rarely been reported in previous study.     

在ad hoc网络中一种新的节能路由切换模型

提出了一种基于能量消耗的路由切换模型(ERHM),它在路由维护中利用切换技术来使路由的能量消耗最小.仿真结果表明采用切换技术的ERHM模型的能量节省量要比不采用切换技术节约1.5～7.5倍,且节点的移动性越大,能量节约越多.     

Longitudinal Wave Propagation in Dielectric Waveguide Array

Based on the established rigorous theory for two-dimensionally periodic (2DP) medium, Longitudinal propagation in Dielectric Waveguide Array (DWA) was analyzed in detail. Firstly, given longitudinal wave vector (k _z), Brillouin dispersion relations between transversal wave vectors were analyzed. Interactions between space harmonics were also studied. Secondly, on condition that transversal wave vector k _x equaled k _y, dispersion relations between longitudinal and transversal wave vectors were analyzed in detail. Because of interactions between space harmonics increasingly getting stronger with k _z or modulation coefficients increasing, stop-bands could be distinctly displayed and thus longitudinal propagation in DWA could be comprehensively analyzed. The applications about longitudinal propagation in DWA were also discussed.     

Training ratio and comparison of trained vector quantizers

The vector quantizer (VQ) codebook is usually designed by clustering a training sequence (TS) drawn from the underlying distribution function. In order to cluster a TS, we may use the K-means algorithm (generalized Lloyd (1982) algorithm) or the self-organizing map algorithm. In this paper, a survey of trained VQ performance is conducted to study the effect of the training ratio on training quantizers. The training ratio, which is defined by the ratio of the TS size to the codebook size, is dependent on the VQ structure. Hence, different VQs may show different training properties, even though the VQs are designed for the same TS. A numerical comparison of trained VQs is then conducted in conjunction with deriving their training ratios. Through the comparison, it is shown that structured VQs can achieve better performance than the full-search scheme if the codebooks are trained by a finite TS. Further, we can derive a design or comparison guideline that maintains equal training ratios in training different VQs.     

工业汽轮机的清洗

本文介绍了用饱和蒸汽对冷凝式汽轮机进行清洗除垢时主要参数的确定、操作要点及清洗方案，清洗后的汽轮机运行正常。     

Activity of NiO in (Ni,Mg)O Solid Solutions

Disagreement exists in the literature concerting the activity of NiO in (Ni,Mg)O solid solutions. Ideal behavior, as well as strong positive deviations and strong negative deviations from ideality, has been reported. In the present study, the activity of NiO was determined by electromotive force measurements using the solid-state cell Pt/Ni-NiO/0.92ZrO₂-0.08Y₂O₃/Ni-(Ni,Mg)O/Pt. The compositions studied had NiO mole fractions of 0.1,0.3,0.5,0.7, and 0.9. In agreement with theoretical expectations, the solid solutions exhibited ideal behavior at 882° and 982°C. Possible reasons for the conflicting results in the literature arc presented.     

Energy release rates of crack kinking by boundary condition sensitivity analysis

The energy release rate, which is the total derivative of the energy with respect to crack length, is recognized as corresponding to the shape sensitivity analysis with the crack length change represented by the tangential component of design velocity. In this paper the sensitivity formula recently developed for a changing boundary condition has been further extended to cover crack kinking under mixed mode loading. Due to difficulty in defining the velocity field at the corner, the energy release rate at the onset of crack kinking is obtained by extrapolating the energy release rates for finite length kinked cracks. A rectangular plate with a single edge slant crack under uniform tension is taken as a numerical example. The multi-region technique in the numerical implementation of the boundary integral equation is adopted to consider the asymmetry of the problem. Excellent accuracy is observed as compared with reference analytic solutions.