New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.     

Facile synthesis of ordered nanocrystalline alumina thin films with tunable mesopore structures

Mesoporous alumina layers have attracted attention for their potential use in ultrafiltration of salts, as a heterogeneous catalyst support, an adsorbent in environmental cleanup, and in petroleum refinement. The ability to control the fast hydrolysis rate of the inorganic precursors using simple and inexpensive routes is important for that potential to be realized. Herein, we introduce a novel and facile route to synthesize mesoporous alumina thin films from the combination of inexpensive and commercially available copolymer with aluminum chloride or nitrate (salts) in an EtOH–surfactant–NH₃ · H₂O–salts (EsNs) system through the evaporation-induced self-assembly (EISA) method. Mesoporous alumina layers obtained utilizing the EsNs system have ordered and tunable pore structures. The ability to easily control the mesophases of the alumina layers within a short time provides distinct advantages over previously reported synthesis procedures. Most importantly, we demonstrate that the binding of surfactant and NH₃ · H₂O for the formation of hydrogen bond between them in the EsNs system controls the fast hydrolysis rate of the inorganic species. This allows for the synthesis of nanocrystalline alumina layers via the aluminum oxo-clusters’ assembly with the surfactant. Such simple route may be applied in the synthesis of other non-silica mesostructured oxides.     

重金属污染物动态吸附试验及数学模拟

本文采用泥沙动力学中Ｒｏｕｓｅ等人用来研究泥沙浓度沿垂线分布的装置。对泥沙吸附重金属污染物进行了动态模拟。试验分有底泥和无底泥两种情况。研究中发现在Ｒｏｕｓｅ装置的水力、泥沙条件下泥沙吸附重金属污染物达到平衡状态需要６小时以上，由极坐标下的重金属迁移转化数学模型方程，在本文具体试验条件下进行数值求解，计算结果和试验结果合良好，说明数学模型是正确合理的试验是可靠的。计算时依据室内静态试验结果，对动态     

An interactive multiple-response simulation optimization method

This study proposes a new interactive multicriteria method for determining the best levels of the decision variables needed to optimize a stochastic computer simulation with multiple response variables. The method, called the Pairwise Comparison Stochastic Cutting Plane (PCSCP) method, combines good features from interactive multiple objective mathematical programming and response surface methodology. The major characteristics of the PCSCP method are: (1) it interacts progressively with the decision-maker (DM) to obtain her preferences, (2) it uses experimental design to explore the decision space adequately while reducing the burden on the DM, and (3) it uses the preference information provided by the DM and the sampling error in the responses to reduce the decision space. The mechanics of the method are illustrated with a numerical example. Some computational studies evaluating the method are also reported.     

Nicalon-fibre-reinforced silicon-carbide composites via polymer solution infiltration and chemical vapour infiltration

A new, faster process was developed for the fabrication of Nicalon-fibre-reinforced SiC composites by combining polymer solution infiltration (PSI) and chemical vapour infiltration (CVI). The process led to the near-net-shape fabrication of fibre-reinforced ceramic-matrix composites and reduced infiltration time. Typical flexural strength and fracture toughness of these composites were 296 MPa and 10.9 MPa m^1/2 at room temperature (RT) and 252 MPa and 9.6 MPa m^1/2 at 1000 °C, respectively. The composites exhibited load-carrying capability after crack initiation.     

Dental plaque flora of the dog with reference to fastidious and anaerobic bacteria associated with bites

Animal bite wounds are amongst the most common types of traumatic injuries in humans. The organisms isolated from these wounds generally reflect the oral flora of the biting animal, and may be fastidious in nature and difficult to identify. This study was undertaken to determine the prevalence of Eikenella corrodens, Actinobacillus actinomycetemcomitans, Porphyromonas and Prevotella spp. in supragingival dental plaque collected from the right maxillary canine and carnassial teeth and the right mandibular canine tooth of dogs. In part one of the study, 30 dogs were used. E. corrodens was found in 62% of these dogs and 44% of individual plaque samples. A. actinomycetemcomitans was not detected in any of the dogs sampled. In part two, 34 dogs were used to determine the prevalence of the black pigmented anaerobic bacilli (Porphyromonas and Prevotella spp.). Porphyromonas gingivalis was present in 68% of these dogs and 47% of individual plaque samples. Prevotella intermedia was present in 44% of the dogs and 23% of individual plaque samples. The recently described Porphyromonas canoris, Porphyromonas salivosa, Porphyromonas cangingivalis, Porphyromonas cansulci, Porphyromonas crevioricanis and Prevotella denticola species were isolated from only 9%, 6%, 3%, 3%, 3% and 3% of dogs respectively. Porphyromonas gingivicanis was not isolated from any of the animals sampled. In conclusion, black-pigmented anaerobic bacilli were isolated from 91% of the animals sampled and therefore constitute a significant risk with respect to bite wound infections. It is also suggested that the prevalence of E. corrodens in wound infections has been underestimated in previous reports because of use of inappropriate techniques for detecting this organism.     

拉西瓦高拱坝岩体力学、工程地质研究成果综述

拉西瓦水电站高拱坝建基岩体工程地质、岩体力学研究是中国水电顾问集团2004年度专题科研成果之一“高混凝土拱坝建基岩体工程地质、岩体力学综合研究”的主要成果,其重点内容为岩体风化、卸荷、岩体质量级别的定量划分、河谷应力场分带、建基岩体主要岩体力学参数研究,坝肩抗滑稳定、开挖后综合检测验证等;在理论探讨、方法实践、预测验证和创新尝试等方面取得了一定成果,具有一定的社会、经济效益。     

Analysis of color symbology from the perspective of cultural semiotics focused on Korean costume colors according to the cultural changes

The purpose of this study was to analyze the symbolization of colors as cultural codes, based on costume colors. In order to study the significance of colors in cultural changes, we carried out a quantitative analysis and interpreted it from the perspective of cultural semiotics. The range of this study was focused on Korean costume colors, over diverse diachronic stages of Korean culture. For this study 1535 color samples were collected, measured with a spectrophotometer, and analyzed quantitatively according their diachronic stages of origin. As a result, red, blue, and yellow were found to be the most frequently used colors during the Chosun Dynasty, a period based on Confucianism. These colors acted as cultural codes with cultural significance. During the Modern times pink, light blue, and black increased in frequency and represented the reception of western culture, the changing sex role of women in society, and utilitarianism. In these days, neutral colors and grayish tones of all colors are the most significant colors of high frequency. The use of such colors is closely related to industrialization, mechanization, functionalism, and the changes of women's sex roles in the societies. They are used as cultural codes, especially to emphasize a rational and masculine image rather than a feminine image. © 2006 Wiley Periodicals, Inc. Col Res Appl, 32, 71–79, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20290