DYNAMIC ANALYSIS OF SORPTION OF VOLATILE ORGANIC COMPOUNDS IN WATER

Chlorinated and brominated volatile organic compounds are among the groundwater pollutants creating major environmental problems. In this study, dynamic behavior of certain volatile organic compounds in water was investigated by using a novel moment technique. Adsorption equilibrium constant and the penetration length of tracers were evaluated by the first absolute and the second central moment expressions derived for a pulse-response system. In order to obtain adsorption equilibrium constant and penetration length, pulse-response experiments were carried out with different tracers in a one-sided adsorption cell at 30°C. The adsorption equilibrium constants at the gas-water interface were calculated for 1,2-dichloroethane, 1,1,1-trichloroethane, and carbon tetrachloride. This study showed that the adsorption equilibrium constant and the penetration length values could be successfully evaluated using the one-sided adsorption cell moment technique. The adsorption equilibrium constant for 1,2-dichloroethane, 1,1,1-trichloroethane, and carbon tetrachloride were found to be 0.30, 0.49, and 0.54 cm³/cm², respectively.     

25th Anniversary Article: CVD Polymers: A New Paradigm for Surface Modifi cation and Device Fabrication

Well‐adhered, conformal, thin (<100 nm) coatings can easily be obtained by chemical vapor deposition (CVD) for a variety of technological applications. Room temperature modification with functional polymers can be achieved on virtually any substrate: organic, inorganic, rigid, flexible, planar, three‐dimensional, dense, or porous. In CVD polymerization, the monomer(s) are delivered to the surface through the vapor phase and then undergo simultaneous polymerization and thin film formation. By eliminating the need to dissolve macromolecules, CVD enables insoluble polymers to be coated and prevents solvent damage to the substrate. CVD film growth proceeds from the substrate up, allowing for interfacial engineering, real‐time monitoring, and thickness control. Initiated‐CVD shows successful results in terms of rationally designed micro‐ and nanoengineered materials to control molecular interactions at material surfaces. The success of oxidative‐CVD is mainly demonstrated for the deposition of organic conducting and semiconducting polymers.     

Structural characterization of plasma sprayed basalt–SiC glass–ceramic coatings

In the present study, the effect of SiC addition on properties of basalt base glass–ceramic coating was investigated. SiC reinforced glass–ceramic coating was realized by atmospheric air plasma spray coating technique on AISI 1040 steel pre-coated with Ni + 5 wt.%Al bond coat. Composite powder mixture consisted of 10%, 20% and 30% SiC by weight were used for coating treatment. Controlled heat treatment for crystallization was realized on pre-coated samples in argon atmosphere at 800 °C, 900 °C and 1000 °C which determined by differential thermal analysis for 1–4 h in order to obtain to the glass–ceramic structure. Microstructural examination showed that the coating performed by plasma spray coating treatment and crystallized was crack free, homogeneous in macro-scale and good bonded. The hardness of the coated samples changed between 666 ± 27 and 873 ± 32 HV_0.01 depending on SiC addition and crystallization temperature. The more the SiC addition and the higher the treatment temperature, the harder the basalt base SiC reinforced glass–ceramic coating became. X-ray diffraction analysis showed that the coatings include augeite [(CaFeMg)–SiO₃], diopside [Ca(Mg_0.15Fe_0.85)(SiO₃)₂], albite [(Na,Ca)Al(Si,Al)₃O₈], andesine [Na_0.499Ca_0.492(Al_1.488Si_2.506O₈] and moissanite (SiC) phases. EDX analyses support the X-ray diffraction analysis.     

World oil prices and agricultural commodity prices: Evidence from an emerging market

Oil prices are thought to have direct effect on agricultural prices followed by an indirect effect through the exchange rate. This paper examines the short- and long-run interdependence between world oil prices, lira-dollar exchange rate, and individual agricultural commodity prices (wheat, maize, cotton, soybeans, and sunflower) in Turkey. To this end, the Toda-Yamamoto causality approach and generalized impulse-response analysis for identification of the long- and short-run interrelationships are applied to the monthly data spanning from January 1994 to March 2010. The impulse-response analysis suggests the Turkish agricultural prices do not significantly react to oil price and exchange rate shocks in the short-run. The long-run causality analysis reveals that the changes in oil prices and appreciation/depreciation of the Turkish lira are not transmitted to agricultural commodity prices in Turkey. Hence, our results support neutrality of agricultural commodity markets in Turkey to both direct and indirect effects of oil price changes.     

Temperature dependence of oxygen diffusion into polymer/carbon nanotube composite films

This study examines the transport properties of polystyrene (PS)/multiwalled carbon nanotube (MWNT) composite films taking into consideration both MWNT composition and temperature, via fluorescence technique. Three different (3, 15, and 40 wt%) MWNT content films were prepared from PS/MWNT mixtures by annealing them at 170°C, above the glass transition temperature of PS for 10 min. The diffusivity of the PS/MWNT composite was determined by performing oxygen (O₂) diffusion measurements within a temperature range of 24 to 70°C for each film and pyrene (P) was used as the fluorescent probe. The diffusion coefficients (D) of oxygen were determined by the fluorescence quenching method assuming Fickian transport. Results indicated that D values are strongly dependent on both temperature and the MWNT content in the film and it was also observed that D coefficients obey Arrhenius behavior, from which diffusion energies were produced and increased along with increases of MWNT content. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Treatment of leachate by electrocoagulation using aluminum and iron electrodes

In this paper, treatment of leachate by electrocoagulation (EC) has been investigated in a batch process. The sample of leachate was supplied from Odayeri Landfill Site in Istanbul. Firstly, EC was compared with classical chemical coagulation (CC) process via COD removal. The first comparison results with 348 A/m2 current density showed that EC process has higher treatment performance than CC process. Secondly, effects of process variables such as electrode material, current density (from 348 to 631 A/m2), pH, treatment cost, and operating time for EC process are investigated on COD and NH4-N removal efficiencies. The appropriate electrode type search for EC provided that aluminum supplies more COD removal (56%) than iron electrode (35%) at the end of the 30 min operating time. Finally, EC experiments were also continued to determine the efficiency of ammonia removal, and the effects of current density, mixing, and aeration. All the findings of the study revealed that treatment of leachate by EC can be used as a step of a joint treatment.     

Evaluation of the radiative recombination mechanism in Si nanocrystals embedded in Silica matrix

We report measurements of the temperature dependence of photoluminescence (PL) life-time and efficiency of Si nanocrystals (Si-Nc) embedded in silica matrix. We use a practical technique based on lock-in acquisition that allows us to simultaneously evaluate, at each emission-energy, intensity and decay-time of the detected signal. Samples are prepared by Silicon-ion implantation in a SiO2 layer followed by thermal annealing. The implantation dose of Si ions ranges between 2 x 10(16) cm-2 and 2 x 10(17) cm(-2). Intensity of Si-Nc PL shows the characteristic rising by increasing the temperature up to approximately 100 K followed by a flattening or a weak reduction up to room temperature. This behaviour reveals a population of radiative states built up by a thermally activated process. Similarly, the measured PL decay-rate is not constant with temperature but shows evidence of a thermal activation. By measuring on different samples the activation energies Ea involved in the temperature dependence of PL intensity and decay time we verify that in all these processes Ea is a decreasing function of implantation dose (i.e., of crystallite size). This result is consistent with models connecting radiative recombination to excitons confined inside Si-Nc, in seeming contrast with the common attribution of PL of non-passivated Si-Nc to the recombination from surface/interface states. To verify the consistency of this statement, we have compared our experimental data with the predictions of quantum confinement theory obtaining an excellent agreement.     

In vitro evaluation of antimicrobial and antibiofilm potentials of silver nanoparticles biosynthesised by Streptomyces griseorubens

This study was performed to determine the antimicrobial and antibiofilm activities of silver nanoparticles (AgNPs) biosynthesised using Streptomyces griseorubens AU2 isolated from soil. The antimicrobial activity of the AgNPs was determined by agar well diffusion, disc diffusion and broth microdilution methods. Diameters of the zone of inhibition results clearly displayed that the microbially biosynthesised AgNPs have potent antimicrobial activity against Candida albicans, Bacillus subtilis, Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus. The minimum inhibitory concentration (MIC) and minimum lethal concentration (MLC) of the nanoparticles that had been determined by broth microdilution method were found to be 20 and 50 µg/ml for C. albicans, B. subtilis and S. aureus; 10 and 20 µg/ml for E. coli and P. aeruginosa, respectively. For determining the effect of AgNPs on biofilm formation under in vitro conditions, MIC and subMICs were studied on P. aeruginosa and S. aureus biofilms by using microplate biofilm assay. Treatment of the AgNPs resulted in a decrease in the biofilm formation of S. aureus and P. aeruginosa as 26.52 and 25.50%, respectively. As a result of this study, it can be suggested that actinobacterially synthesised AgNPs have an effective potential to be used for pharmaceutical applications against multi‐resistant microorganisms.Inspec keywords: silver, nanoparticles, nanomedicine, antibacterial activity, biomedical materials, microorganismsOther keywords: antimicrobial potentials, antibiofilm potentials, silver nanoparticles, antimicrobial activity, antibiofilm activity, Streptomyces griseorubens AU2, disc diffusion, microdilution method, Bacillus subtilis, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, nanoparticle minimum inhibitory concentration, nanoparticle minimum lethal concentration, biofilm formation, in vitro conditions, microplate biofilm assay, pharmaceutical applications, multiresistant microorganisms, Ag