Collaborative work during interventional radiological procedures based on a multicast satellite-terrestrial network.

Collaboration is a key requirement in several contemporary interventional radiology procedures (IRPs). This work proposes a multicast hybrid satellite system capable of supporting advanced IRP collaboration, and evaluates its feasibility and applicability. Following a detailed IRP requirements study, we have developed a system which supports IRP collaboration through the employment of a hybrid satellite-terrestrial network, a prototype multicast version of wavelet based interactive communication system (WinVicos) application, and a partition aggregation and conditional coding (PACC) wavelet codec. A semistructured questionnaire was also used to receive evaluative feedback from collaborating participants. The departments of interventional radiology of University Hospital of Patras, Greece and of Charite Hospital of Berlin, Germany have been connected on the system. Eight interventional radiologists and a vascular surgeon participated periodically in three satellite-terrestrial "fully collaborative" IRPs (average time 90 min) of high complexity and in four terrestrial educational sessions with great success, evidenced by considerable improving the IRP outcomes (clinical and educational). In case of high complexity, where the simultaneous presence of remote interventional expert and/or surgeon is required, advanced collaboration among staff of geographically dispersed international centers is feasible via integration of existing networking and other technologies.     

Analysis of freely dissolved alcohol ethoxylate homologues in various seawater matrixes using solid-phase microextraction

Solid-phase microextraction fibers (SPME) were tested as tools to determine freely dissolved alcohol ethoxylate (AE) surfactants in seawater matrixes. Partitioning of a wide range of AE homologues into a 35-mum polyacrylate fiber coating was linearly related to aqueous concentrations as low as submicrograms per liter, with high reproducibility. The exposure time needed to reach equilibrium between aqueous phase and the SPME fiber depended on the fiber-water partitioning coefficient (Kfw) of the AE homologue. Specific attention was given to the influence of various matrixes on the analysis via SPME. The presence of sediment increases the uptake kinetics of AE homologues for which diffusion in the aqueous phase is rate limiting. The Kfw in equilibrated systems was not affected by the presence of other homologues, micelles, or varying amounts of sediment phase. SPME is therefore a suitable tool for analysis of AE in sorption studies and sediment toxicity tests. A strong linear relation was observed between Kfw and the hydrophobicity of the AE homologue, using estimated octanol-water partition coefficients. This relation can be used to predict the partitioning coefficient of any AE homologue to the SPME fiber, which facilitates the analysis of complex mixtures.     

The development of self-assembled liquid crystal display alignment layers

From simple pocket calculators to mobile telephones and liquid crystal display (LCD)-TV, over the past few decades, devices based on LCD technology have proliferated and can now be found in all conceivable aspects of everyday life. Although used in cutting-edge technology, it is surprising that a vital part in the construction of such displays, namely the alignment layer, relies essentially on a mechanical rubbing process, invented almost 100 years ago. In this paper efforts to develop alignment layers (also called command layers) by processes other than rubbing, namely self-assembly of molecular and macromolecular components will be discussed. Two topics will be presented: (i) tuneable command layers formed by stepwise assembling of siloxane oligomers and phthalocyanine dyes on indium tin oxide surfaces and (ii) command layers formed by self-assembly of porphyrin trimers. The potential use of these layers in sensor devices will also be mentioned.     

Duplex SiCN/DLC coating as a solution to improve fretting—Corrosion resistance of steel

Fretting corrosion damages are commonly observed when two metallic bodies, which are in contact with each other, are subjected to oscillatory motions of low amplitude. Such kind of degradation mode is often responsible for limited durability of aeronautical joints. In the present paper, a multifunctional duplex coating based on Si–C–N and diamond-like carbon (DLC) materials, combining corrosion resistance and good tribological properties is described. Amorphous hydrogenated SiC, SiCN, SiC/DLC and SiCN/DLC were deposited on steel substrates by a plasma assisted chemical vapour deposition (PACVD) technique, using tetramethylsilane (TMS), ammonia (NH₃) or acetylene (C₂H₂) as gas precursors. Nitrogen incorporation has shown to improve the corrosion protection ability of SiC coatings. The corrosion behaviour and the tribological performance in aqueous media of SiCN/DLC coating have therefore been investigated. A test rig has been designed to validate the fretting resistance of this duplex coating for aeronautic applications. It was found that the combination of a SiCN-based PACVD sublayer with a DLC topcoat could provide an enhanced solution to withstand both fretting and corrosion.     

MEMS based hair flow-sensors as model systems for acoustic perception studies

Arrays of MEMS fabricated flow sensors inspired by the acoustic flow-sensitive hairs found on the cerci of crickets have been designed, fabricated and characterized. The hairs consist of up to 1?mm long SU-8 structures mounted on suspended membranes with normal translational and rotational degrees of freedom. Electrodes on the membrane and on the substrate form variable capacitors, allowing for capacitive read-out. Capacitance versus voltage, frequency dependence and directional sensitivity measurements have been successfully carried out on fabricated sensor arrays, showing the viability of the concept. The sensors form a model system allowing for investigations on sensory acoustics by their arrayed nature, their adaptivity via electrostatic interaction (frequency tuning and parametric amplification) and their susceptibility to noise (stochastic resonance).     

Evaluation of the Antimicrobial Potential of Alginate and Alginate/Chitosan Films Containing Potassium Sorbate and Natamycin

The antimicrobial potential of alginate films (AFs) and alginate/chitosan composite films with two different mass proportions of the biopolymers, 82.5:17.5 (CF1) and 65:35 (CF2), containing potassium sorbate (KS) or natamycin was evaluated. At the practical limit of KS addition (0.17 g KS per gram of alginate) for pure AFs, no inhibition zones were observed against Debaromyces hansenii, Penicillium commune and Penicillium roqueforti by the agar diffusion test. Above this concentration, films became opaque, brittle and showed a whitish precipitate over their surface, making them not suitable for use. However, alginate and alginate/chitosan composite films containing natamycin were able to inhibit the growth of the three microorganisms listed above. Natamycin was effective at concentrations as low as 0.005 g per gram of biopolymer for AF and 0.01 g per gram of biopolymer for both composite films, alginate/chitosan 65:35 (CF1) and alginate/chitosan 82.5:17.5 (CF2) against all microorganisms tested. The inhibitory zone diameter increased as concentration of natamycin increased. Active films containing 0.04 g natamycin per gram of biopolymer obtained in the present study exhibited suitable functional attributes and showed excellent perspectives as active antimicrobial films intended for food protection applications. Copyright © 2012 John Wiley & Sons, Ltd.     

APPLICATIONS OF AN EXPONENTIAL FINITE-DIFFERENCE TECHNIQUE

ABSTRACT

In this paper an expontial finite-difference scheme, first presented by Bhattacharya for one-dimensional, unsteady heat conduction problems in a plane wail, is used to solve various partial differential equations. Solutions of the unsteady diffusion equation in three dimensions and of the viscous form of Burgers’ equation ere used to illustrate the method. Predicted results are compared with exact solutions or with results obtained by other numerical methods.